The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Metal Extraction Processes for Electronic Waste and Existing Industrial Routes: A Review and Australian Perspective
Open accessAbstract
The useful life of electrical and electronic equipment (EEE) has been shortened as a consequence of the advancement in technology and change in consumer patterns. This has resulted in the generation of large quantities of electronic waste (e-waste) that needs to be managed. The handling of e-waste including combustion in incinerators, disposing in landfill or exporting overseas is no longer permitted due to environmental pollution and global legislations. Additionally, the presence of precious metals (PMs) makes e-waste recycling attractive economically. In this paper, current metallurgical processes for the extraction of metals from e-waste, including existing industrial routes, are reviewed. In the first part of this paper, the definition, composition and classifications of e-wastes are described. In the second part, separation of metals from e-waste using mechanical processing, hydrometallurgical and pyrometallurgical routes are critically analyzed. Pyrometallurgical routes are comparatively economical and eco-efficient if the hazardous emissions are controlled. Currently, pyrometallurgical routes are used initially for the segregation and upgrading of PMs (gold and silver) into base metals (BMs) (copper, lead and nickel) and followed by hydrometallurgical and electrometallurgical processing for the recovery of pure base and PMs. For the recycling of e-waste in Australia, challenges such as collection, transportation, liberation of metal fractions, and installation of integrated smelting and refining facilities are identified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
E-waste: An assessment of global production and environmental impacts
Robinson, B. H. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.09.044 · Cited by 1,777
Metallurgical recovery of metals from electronic waste: A review
Cui, J., & Zhang, L. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.02.001 · Cited by 1,770
Global perspectives on e-waste
Widmer, R., Oswald-Krapf, H., Sinha-Khetriwal, D., Schnellmann, M., & Böni, H. (2005) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2005.04.001 · Cited by 1,709
Mechanical recycling of waste electric and electronic equipment: a review
Cui, J., & Forssberg, E. (2003) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(03)00061-x · Cited by 1,096
Electronic waste recycling: A review of U.S. infrastructure and technology options
Kang, H.-Y., & Schoenung, J. M. (2005) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2005.06.001 · Cited by 593
Huang, K., Guo, J., & Xu, Z. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.08.051 · Cited by 588
Recovery of high purity precious metals from printed circuit boards
Park, Y. J., & Fray, D. J. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.09.043 · Cited by 499
Alternatives to cyanide in the gold mining industry: what prospects for the future?
Hilson, G., & Monhemius, A. J. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.09.005 · Cited by 474
Recycling of WEEE: Characterization of spent printed circuit boards from mobile phones and computers
Yamane, L. H., de Moraes, V. T., Espinosa, D. C. R., & Tenório, J. A. S. (2011) · Waste Management · doi:10.1016/j.wasman.2011.07.006 · Cited by 390
Recycling of non-metallic fractions from waste printed circuit boards: A review
Guo, J., Guo, J., & Xu, Z. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.02.104 · Cited by 390
Recycling of Electronic Scrap at Umicore's Integrated Metals Smelter and Refinery
Hagelüken, C. (2006) · Cited by 357
Exploring e-waste management systems in the United States
Kahhat, R., Kim, J., Xu, M., Allenby, B., Williams, E., & Zhang, P. (2008) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2008.03.002 · Cited by 350
Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy
Veit, H. M., Bernardes, A. M., Ferreira, J. Z., Tenório, J. A. S., & Malfatti, C. D. F. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.05.010 · Cited by 308
Does WEEE recycling make sense from an environmental perspective?
Hischier, R., Wäger, P., & Gauglhofer, J. (2005) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2005.04.003 · Cited by 301 · cited 1×
“Several investigators reported on the individual countries and global legislations on managing and handling of e-waste [1,23–29].”
BackgroundManagement and recycling of electronic waste
Tanskanen, P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.005 · Cited by 301
Present status of the recycling of waste electrical and electronic equipment in Korea
Lee, J.-C., Song, H. T., & Yoo, J.-M. (2007) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2007.01.010 · Cited by 292
Recovery of gold from computer circuit board scrap using aqua regia
Sheng, P. P., & Etsell, T. H. (2007) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x07076946 · Cited by 243
Leaching and electrochemical recovery of copper, lead and tin from scrap printed circuit boards
Mecucci, A., & Scott, K. (2002) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.575 · Cited by 234
Recovery of precious metals from electronic scrap by hydrometallurgical processing routes
Quinet, P., Proost, J., & Van Lierde, A. (2005) · Mining, Metallurgy & Exploration · doi:10.1007/bf03403191 · Cited by 202
A review on hydrometallurgical extraction and recovery of cadmium from various resources
Sadegh Safarzadeh, M., Bafghi, M. S., Moradkhani, D., & Ojaghi Ilkhchi, M. (2007) · Minerals Engineering · doi:10.1016/j.mineng.2006.07.001 · Cited by 186
Hagelüken, C. (2006) · Proceedings of the ... IEEE International Symposium on Electronics and the Environment · doi:10.1109/isee.2006.1650064 · Cited by 183
Product characterization of waste printed circuit board by pyrolysis
Jie, G., Li, Y., & Mai-xi, L. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.08.007 · Cited by 176
Li, J., Xu, Z., & Zhou, Y. (2007) · Journal of Electrostatics · doi:10.1016/j.elstat.2006.08.004 · Cited by 167
Otunniyi, I. O., Vermaak, M. K. G., & Groot, D. R. (2009) · Waste Management · doi:10.1016/j.wasman.2009.03.004 · Cited by 157
An integrated approach to electronic waste (WEEE) recycling
Dalrymple, I. M., Wright, N., Kellner, R., Bains, N., Geraghty, K., Goosey, M., & Lightfoot, L. (2007) · Circuit World · doi:10.1108/03056120710750256 · Cited by 147
Minerals, Metals and Sustainability: Meeting Future Material Needs
Rankin, W. (2011) · CSIRO Publishing eBooks · doi:10.1071/9780643097278 · Cited by 136
Pyrolysis and combustion of electronic wastes
Moltó, J., Font, R., Gálvez, A., & Conesa, J. A. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.023 · Cited by 132
Solvent extraction in hydrometallurgy: Present and future
Ritcey, G. M. (2006) · Tsinghua Science and Technology · doi:10.1016/s1007-0214(06)70168-7 · Cited by 111
A process for extracting precious metals from spent printed circuit boards and automobile catalysts
Kim, B.-S., Lee, J., Seo, S.-P., Park, Y.-K., & Sohn, H. Y. (2004) · JOM · doi:10.1007/s11837-004-0237-9 · Cited by 102
Integrated recycling of non-ferrous metals at Boliden Ltd. Ronnskar smelter
Theo, L. (2002) · IEEE International Symposium on Electronics and the Environment (ISEE) · doi:10.1109/isee.1998.675028 · Cited by 84
A Plate Produced by Nonmetallic Materials of Pulverized Waste Printed Circuit Boards
Guo, J., Cao, B., Guo, J., & Xu, Z. (2008) · Environmental Science & Technology · doi:10.1021/es800825u · Cited by 76
Lu, H., Li, J., Guo, J., & Xu, Z. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.06.004 · Cited by 65
Recycling of Printed Wiring Boards with Mounted Electronic Components
Iji, M., & Yokoyama, S. (1997) · Circuit World · doi:10.1108/03056129710370196 · Cited by 62
Review of pyrometallurgical treatment of electronic scrap
Shuey, S. A., & Taylor, P. R. (2005) · Mining Engineering · Cited by 42
Optimization of Precious Metal Recovery from Waste Electrical and Electronic Equipment Boards
Delfini, M., Ferrini, M., Manni, A., Massacci, P., Piga, L., & Scoppettuolo, A. (2011) · Journal of Environmental Protection · doi:10.4236/jep.2011.26078 · Cited by 33
Eco-efficiency of take-back and recycling, a comprehensive approach
Huisman, J., & Stevels, A. L. N. (2006) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2006.874970 · Cited by 30
Cited by
E-waste: An overview on generation, collection, legislation and recycling practices
Kumar, A., Holuszko, M., & Espinosa, D. C. R. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.01.018 · Cited by 875
Ilankoon, I. M. S. K., Ghorbani, Y., Chong, M. N., Herath, G., Moyo, T., & Petersen, J. (2018) · Waste Management · doi:10.1016/j.wasman.2018.10.018 · Cited by 552
Tansel, B. (2017) · Environment International · doi:10.1016/j.envint.2016.10.002 · Cited by 461
Urban Mining of E-Waste is Becoming More Cost-Effective Than Virgin Mining
Zeng, X., Mathews, J. A., & Li, J. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b04909 · Cited by 428
E-waste management and its effects on the environment and human health
Rautela, R., Arya, S., Vishwakarma, S., Lee, J., Kim, K.-H., & Kumar, S. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145623 · Cited by 405
Metadata
- Authors
- Khaliq, A., Rhamdhani, M., Brooks, G., & Masood, S.
- Venue
- Resources
- Publisher
- MDPI AG
- Published
- 2014-02-19
- Volume
- 3
- Issue
- 1
- Pages
- 152-179
- ISSN
- 2079-9276 (ISSN-L)
- OpenAlex
- W2086176981
- Cited by
- 511
- References
- 36
- FWCI
- 43.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.