Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 46 of the 47 references it cites were found in a registry or an index.

Rapid Assessment of Building Damage Using Multi-Source Data: A Case Study of April 2015 Nepal Earthquake

Open access
Chen, Jin, Tang, Hong, Ge, Jiayi, Pan, Yaozhong · 2022 · Remote Sensing

Abstract

It is of great significance for emergency rescue to rapidly assess damage of buildings after an earthquake. Some previous methods are time-consuming, data are difficult to obtain, or there is lack of regional damage assessment. We proposed a novel way to rapidly assess building damage by comprehensively utilizing earth observation-derived data and field investigation to alleviate the above problems. These data are related to hazard-causing factors, hazard-formative environment, and hazard-affected body. Specifically, predicted ground motion parameters are used to reflect hazard-causing factors, e.g., peak ground velocity (PGV), peak ground acceleration (PGA), and pseudo-spectral acceleration (PSA). The hazard-formative environment is denoted by the underground 30 m shear wave velocity. Vulnerability of buildings is reflected by their structure type, age, and height. We take the April 2015 Nepal earthquake as a case study, and building damage data interpreted from satellite images are used to validate the effectiveness of the proposed method. Based on the gradient boosting machine, this paper rapidly assesses building damage from two different spatial levels, i.e., pixel and microzone, and obtains the potentially affected position and regional damage rate. Compared with the method of fragility function, the machine learning method provide a better estimation of the building damage rate. Compared with the assessment method based on remote sensing image, the method in this paper is very efficient since spatial distribution of hazard-causing factors, e.g., PGA, can be quickly predicted shortly after an earthquake. The comparison of experiment with and without vulnerability data of buildings shows that data on the vulnerability of buildings are very important to improve the assessment accuracy of building damage.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/rs14061358

Cites

46 of 47 references verified0 citation errors · 1 not checkable

Statistics

Figures

Figure 1 Technical flow chart. The blue rectangles represent data, the yellow rectangles represent method or processing operations, and the red rectangles represent the desired result. Figure 1. Technical flow chart. The blue rectangles represent data, the yellow rectangles represent method or processing operations, and the red rectangles represent the desired result.
Figure 1 Technical flow chart. The blue rectangles represent data, the yellow rectangles represent method or processing operations, and the red rectangles represent the desired result. Figure 1. Technical flow chart. The blue rectangles represent data, the yellow rectangles represent method or processing operations, and the red rectangles represent the desired result.CC-BY · From the PDF
Figure 2 Distribution of building regions with structural information and refined building regions. Subplot ( a ) shows the geographical location of all microzones. Subplot ( b ) shows the distribution of all microzones. The background is terrain, and the light green regions are the administrative wards with building structure information. The longer yellow line in subplot b represents the seismogenic fault . Subplots ( c -e ) show the refinement process of the building regions, transforming the building regions from wards to microzones. The Green wireframe is the circumscribed polygon of blue buildings in subplot ( d ); the red parts are building regions after refinement named microzones, and the red polygon in subplot ( e ) is one of the microzones. Figure 2. Distribution of building regions with structural information and refined building regions. Subplot ( a ) shows the geographical location of all microzones. Subplot ( b ) shows the distribution of all microzones. The background is terrain, and the light green regions are the administrative wards with building structure information. The longer yellow line in subplot b represents the seismogenic fault. Subplots ( c -e ) show the refinement process of the building regions, transforming the building regions from wards to microzones. The Green wireframe is the circumscribed polygon of blue buildings in subplot ( d ); the red parts are building regions after refinement named microzones, and the red polygon in subplot ( e ) is one of the microzones.
Figure 2 Distribution of building regions with structural information and refined building regions. Subplot ( a ) shows the geographical location of all microzones. Subplot ( b ) shows the distribution of all microzones. The background is terrain, and the light green regions are the administrative wards with building structure information. The longer yellow line in subplot b represents the seismogenic fault . Subplots ( c -e ) show the refinement process of the building regions, transforming the building regions from wards to microzones. The Green wireframe is the circumscribed polygon of blue buildings in subplot ( d ); the red parts are building regions after refinement named microzones, and the red polygon in subplot ( e ) is one of the microzones. Figure 2. Distribution of building regions with structural information and refined building regions. Subplot ( a ) shows the geographical location of all microzones. Subplot ( b ) shows the distribution of all microzones. The background is terrain, and the light green regions are the administrative wards with building structure information. The longer yellow line in subplot b represents the seismogenic fault. Subplots ( c -e ) show the refinement process of the building regions, transforming the building regions from wards to microzones. The Green wireframe is the circumscribed polygon of blue buildings in subplot ( d ); the red parts are building regions after refinement named microzones, and the red polygon in subplot ( e ) is one of the microzones.CC-BY · From the PDF
Figure 3 ( a , b ) Damage proxy map and pixel-level study area. The green box is the analysis area at the pixel level, including Kathmandu. The red position indicates where there may be building damage. The yellow line indicates the seismogenic fault. Figure 3. ( a , b ) Damage proxy map and pixel-level study area. The green box is the analysis area at the pixel level, including Kathmandu. The red position indicates where there may be building damage. The yellow line indicates the seismogenic fault.
Figure 3 ( a , b ) Damage proxy map and pixel-level study area. The green box is the analysis area at the pixel level, including Kathmandu. The red position indicates where there may be building damage. The yellow line indicates the seismogenic fault. Figure 3. ( a , b ) Damage proxy map and pixel-level study area. The green box is the analysis area at the pixel level, including Kathmandu. The red position indicates where there may be building damage. The yellow line indicates the seismogenic fault.CC-BY · From the PDF
Figure 4 Histogram-based decision tree algorithm. The left part of the figure represents the organization form of the original data, and the middle part of the figure represents the histogram data. Figure 4. Histogram-based decision tree algorithm. The left part of the figure represents the organization form of the original data, and the middle part of the figure represents the histogram data.
Figure 4 Histogram-based decision tree algorithm. The left part of the figure represents the organization form of the original data, and the middle part of the figure represents the histogram data. Figure 4. Histogram-based decision tree algorithm. The left part of the figure represents the organization form of the original data, and the middle part of the figure represents the histogram data.CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Figure 6 Performance comparison of classification methods. Subplot ( a ) shows the accuracy, recall, precision, and F1 score of several machine learning methods. Subplot ( b ) shows the FPR and TPR classified by several methods with a classification threshold of 0.5. Figure 6. Performance comparison of classification methods. Subplot ( a ) shows the accuracy, recall, precision, and F1 score of several machine learning methods. Subplot ( b ) shows the FPR and TPR classified by several methods with a classification threshold of 0.5.
Figure 6 Performance comparison of classification methods. Subplot ( a ) shows the accuracy, recall, precision, and F1 score of several machine learning methods. Subplot ( b ) shows the FPR and TPR classified by several methods with a classification threshold of 0.5. Figure 6. Performance comparison of classification methods. Subplot ( a ) shows the accuracy, recall, precision, and F1 score of several machine learning methods. Subplot ( b ) shows the FPR and TPR classified by several methods with a classification threshold of 0.5.CC-BY · From the PDF
Figure 7 Damage rate curves of different damage levels and distribution of building attributes. Subplot ( a ), the building age distribution; subplot ( d ), the damage rate curves of different age; subplot ( b ), the building height distribution; subplot ( e ), the damage rate curves of different height; subplot ( c ), the distribution of different building structures; subplot ( f ) shows the effect of different stone masonry proportions on the damage rate. Figure 7. Damage rate curves of different damage levels and distribution of building attributes. Subplot ( a ), the building age distribution; subplot ( d ), the damage rate curves of different age; subplot ( b ), the building height distribution; subplot ( e ), the damage rate curves of different height; subplot ( c ), the distribution of different building structures; subplot ( f ) shows the effect of different stone masonry proportions on the damage rate.
Figure 7 Damage rate curves of different damage levels and distribution of building attributes. Subplot ( a ), the building age distribution; subplot ( d ), the damage rate curves of different age; subplot ( b ), the building height distribution; subplot ( e ), the damage rate curves of different height; subplot ( c ), the distribution of different building structures; subplot ( f ) shows the effect of different stone masonry proportions on the damage rate. Figure 7. Damage rate curves of different damage levels and distribution of building attributes. Subplot ( a ), the building age distribution; subplot ( d ), the damage rate curves of different age; subplot ( b ), the building height distribution; subplot ( e ), the damage rate curves of different height; subplot ( c ), the distribution of different building structures; subplot ( f ) shows the effect of different stone masonry proportions on the damage rate.CC-BY · From the PDF
Figure 8 Feature importance of different feature combinations. Subplot ( a ) represents the EASY mode, and subplot ( b ) represents the HARD mode. Figure 8. Feature importance of different feature combinations. Subplot ( a ) represents the EASY mode, and subplot ( b ) represents the HARD mode.
Figure 8 Feature importance of different feature combinations. Subplot ( a ) represents the EASY mode, and subplot ( b ) represents the HARD mode. Figure 8. Feature importance of different feature combinations. Subplot ( a ) represents the EASY mode, and subplot ( b ) represents the HARD mode.CC-BY · From the PDF
Figure 9 ( a , b ) Empirical fragility curves for stone masonry buildings in Nepal considering PGA and PSA0.3s as intensity measures. Figure 9. ( a , b ) Empirical fragility curves for stone masonry buildings in Nepal considering PGA and PSA0.3s as intensity measures.
Figure 9 ( a , b ) Empirical fragility curves for stone masonry buildings in Nepal considering PGA and PSA0.3s as intensity measures. Figure 9. ( a , b ) Empirical fragility curves for stone masonry buildings in Nepal considering PGA and PSA0.3s as intensity measures.CC-BY · From the PDF
Figure 10 Evaluation of the assessment results of the best-performing (considering building attributes) regression model for different damage grades on test data. Subplots ( a -d ) represent evaluation of the best-performing model for damage grades 5-2, respectively. Figure 10. Evaluation of the assessment results of the best-performing (considering building attributes) regression model for different damage grades on test data. Subplots ( a -d ) represent evaluation of the best-performing model for damage grades 5-2, respectively.
Figure 10 Evaluation of the assessment results of the best-performing (considering building attributes) regression model for different damage grades on test data. Subplots ( a -d ) represent evaluation of the best-performing model for damage grades 5-2, respectively. Figure 10. Evaluation of the assessment results of the best-performing (considering building attributes) regression model for different damage grades on test data. Subplots ( a -d ) represent evaluation of the best-performing model for damage grades 5-2, respectively.CC-BY · From the PDF
Figure 11 Map of building damage assessment in Kathmandu. Subplot ( a ), terrain, building, and damage information of the training area; subplot ( b ), terrain, building, and damage information of the test area; subplot ( c ), the damage assessment in test area; subplot ( d ), the epicenter, the training area, and test area; subplot ( e ), detailed display of the classified result in the black box. Orange pixels represent damaged pixels classified correctly, and green pixels represent damaged pixels classified incorrectly. Figure 11. Map of building damage assessment in Kathmandu. Subplot ( a ), terrain, building, and damage information of the training area; subplot ( b ), terrain, building, and damage information of the test area; subplot ( c ), the damage assessment in test area; subplot ( d ), the epicenter, the training area, and test area; subplot ( e ), detailed display of the classified result in the black box. Orange pixels represent damaged pixels classified correctly, and green pixels represent damaged pixels classified incorrectly.
Figure 11 Map of building damage assessment in Kathmandu. Subplot ( a ), terrain, building, and damage information of the training area; subplot ( b ), terrain, building, and damage information of the test area; subplot ( c ), the damage assessment in test area; subplot ( d ), the epicenter, the training area, and test area; subplot ( e ), detailed display of the classified result in the black box. Orange pixels represent damaged pixels classified correctly, and green pixels represent damaged pixels classified incorrectly. Figure 11. Map of building damage assessment in Kathmandu. Subplot ( a ), terrain, building, and damage information of the training area; subplot ( b ), terrain, building, and damage information of the test area; subplot ( c ), the damage assessment in test area; subplot ( d ), the epicenter, the training area, and test area; subplot ( e ), detailed display of the classified result in the black box. Orange pixels represent damaged pixels classified correctly, and green pixels represent damaged pixels classified incorrectly.CC-BY · From the PDF
Figure 12 Ranges of influencing factors of Nepal earthquake. Subplots ( a -h ) represent the value distribution of Vs30, PGA, PGV, PSA0.3s, PSA1.0s, PSA3.0s, slope, building density, and other factors. The blue histogram and curve represent the distribution of values on the training set, and the red histogram and curve represent the distribution of values on the test set. Figure 12. Ranges of influencing factors of Nepal earthquake. Subplots ( a -h ) represent the value distribution of Vs30, PGA, PGV, PSA0.3s, PSA1.0s, PSA3.0s, slope, building density, and other factors. The blue histogram and curve represent the distribution of values on the training set, and the red histogram and curve represent the distribution of values on the test set.
Figure 12 Ranges of influencing factors of Nepal earthquake. Subplots ( a -h ) represent the value distribution of Vs30, PGA, PGV, PSA0.3s, PSA1.0s, PSA3.0s, slope, building density, and other factors. The blue histogram and curve represent the distribution of values on the training set, and the red histogram and curve represent the distribution of values on the test set. Figure 12. Ranges of influencing factors of Nepal earthquake. Subplots ( a -h ) represent the value distribution of Vs30, PGA, PGV, PSA0.3s, PSA1.0s, PSA3.0s, slope, building density, and other factors. The blue histogram and curve represent the distribution of values on the training set, and the red histogram and curve represent the distribution of values on the test set.CC-BY · From the PDF
Figure 13 Validation of classified results of damaged pixels on remote sensing images. Remote sensing validation data were produced by UNOSAT project of UNITAR. The selected verification pixels are distributed in the blue box of the thumbnail (part of the test area). In subplot ( a ), the yellow pixels represent the classified damaged pixels, the red pixels represent the damaged locations interpreted from optical image, and the orange pixels represent the correctly classified damaged pixels (true positive). The sampling pixels b to g are marked in subplot ( a ) in blue font. Subplots ( b1 , c1 ) and ( b2 , c2 ) are optical images at the positions of red pixels (false negative) before and after earthquake, respectively. Subplots ( d1 -g1 ) and ( d2 -g2 ) are optical images at the positions of orange pixels (true positive) before and after earthquake, respectively. The red and orange dash boxes indicate the locations of the damaged buildings. Figure 13. Validation of classified results of damaged pixels on remote sensing images. Remote sensing validation data were produced by UNOSAT project of UNITAR. The selected verification pixels are distributed in the blue box of the thumbnail (part of the test area). In subplot ( a ), the yellow pixels represent the classified damaged pixels, the red pixels represent the damaged locations interpreted from optical image, and the orange pixels represent the correctly classified damaged pixels (true positive). The sampling pixels b to g are marked in subplot ( a ) in blue font. Subplots ( b1 , c1 ) and ( b2 , c2 ) are optical images at the positions of red pixels (false negative) before and after earthquake, respectively. Subplots ( d1 -g1 ) and ( d2 -g2 ) are optical images at the positions of orange pixels (true positive) before and after earthquake, respectively. The red and orange dash boxes indicate the locations of the damaged buildings.
Figure 13 Validation of classified results of damaged pixels on remote sensing images. Remote sensing validation data were produced by UNOSAT project of UNITAR. The selected verification pixels are distributed in the blue box of the thumbnail (part of the test area). In subplot ( a ), the yellow pixels represent the classified damaged pixels, the red pixels represent the damaged locations interpreted from optical image, and the orange pixels represent the correctly classified damaged pixels (true positive). The sampling pixels b to g are marked in subplot ( a ) in blue font. Subplots ( b1 , c1 ) and ( b2 , c2 ) are optical images at the positions of red pixels (false negative) before and after earthquake, respectively. Subplots ( d1 -g1 ) and ( d2 -g2 ) are optical images at the positions of orange pixels (true positive) before and after earthquake, respectively. The red and orange dash boxes indicate the locations of the damaged buildings. Figure 13. Validation of classified results of damaged pixels on remote sensing images. Remote sensing validation data were produced by UNOSAT project of UNITAR. The selected verification pixels are distributed in the blue box of the thumbnail (part of the test area). In subplot ( a ), the yellow pixels represent the classified damaged pixels, the red pixels represent the damaged locations interpreted from optical image, and the orange pixels represent the correctly classified damaged pixels (true positive). The sampling pixels b to g are marked in subplot ( a ) in blue font. Subplots ( b1 , c1 ) and ( b2 , c2 ) are optical images at the positions of red pixels (false negative) before and after earthquake, respectively. Subplots ( d1 -g1 ) and ( d2 -g2 ) are optical images at the positions of orange pixels (true positive) before and after earthquake, respectively. The red and orange dash boxes indicate the locations of the damaged buildings.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 45 references

Research works printed but not linked: 3

  1. Yamaguchi, N., and Yamazaki, F. (February, January 30). Fragility curves for buildings in Japan based on damage surveys after the 1995 Kobe earthquake. Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand.
  2. Horie, K., Hayashi, H., Okimura, T., Tanaka, S., Maki, N., and Torii, N. (2004, January 1–6). Development of seismic risk assessment method reflecting building damage levels, fragility functions for complete collapse of wooden buildings. Proceedings of the 13th World Conference Earthquake Engineering, Vancouver, BC, Canada.
  3. Hossain, 2015, Characteristics and consequence of Nepal earthquake 2015: A review, Geotech. Eng. J. SEAGS AGSSFA, 46, 114

Cited by

See all 31

Metadata

Authors
Chen, J., Tang, H., Ge, J., & Pan, Y.
Affiliations
Beijing Normal University (CN)
Corresponding author
Tang, Hong
Venue
Remote Sensing
Publisher
MDPI AG
Published
2022-03-11
Volume
14
Issue
6
Pages
1358
ISSN
2072-4292 (ISSN-L)
OpenAlex
W4220823450
Cited by
31
References
45
Citations by year
2026: 4 · 2025: 4 · 2024: 4 · 2023: 15 · 2022: 4
FWCI
3.04
Type
journal article
Language
en
Open access
Locations
  • Remote Sensing (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
  • National Key R&D Program of China (2018YFC1504603)
  • National Natural Science Foundation of China (42192584)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Seismic Performance and Analysis
  • Social Sciences › Geography, Planning and Development › Earthquake and Disaster Impact Studies
  • Physical Sciences › Engineering › Civil and Structural Engineering › Masonry and Concrete Structural Analysis
Keywords
building damage assessment, 2015 Nepal earthquake, rapid damage assessment, ground motion prediction, peak ground acceleration, peak ground velocity, pseudo-spectral acceleration, shear wave velocity, building vulnerability, gradient boosting, microzoning, satellite imagery, emergency rescue

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Rapid Assessment of Building Damage Using Multi-Source Data: A Case Study of April 2015 Nepal Earthquake. https://app.cochat.ai/papers/10.3390/rs14061358
The paper
Chen, J., Tang, H., Ge, J., & Pan, Y. (2022). Rapid Assessment of Building Damage Using Multi-Source Data: A Case Study of April 2015 Nepal Earthquake. Remote Sensing. https://doi.org/10.3390/rs14061358

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.