The DOI matches its Crossref record; 50 of the 56 references it cites were found in a registry or an index.
Sensor Systems for Prognostics and Health Management
Open accessAbstract
Prognostics and health management (PHM) is an enabling discipline consisting of technologies and methods to assess the reliability of a product in its actual life cycle conditions to determine the advent of failure and mitigate system risk. Sensor systems are needed for PHM to monitor environmental, operational, and performance-related characteristics. The gathered data can be analyzed to assess product health and predict remaining life. In this paper, the considerations for sensor system selection for PHM applications, including the parameters to be measured, the performance needs, the electrical and physical attributes, reliability, and cost of the sensor system, are discussed. The state-of-the-art sensor systems for PHM and the emerging trends in technologies of sensor systems for PHM are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1. An example of PHM application for an automobile [15].](/paper-figures/a01c5a00bfe54fa09441bd2fe5c5a39d/sensor-systems-for-prognostics-and-health-management-figure-1.jpg)
![Figure 2. Integrated sensor system for PHM [17].](/paper-figures/87550a242a074410b46788cce2465498/sensor-systems-for-prognostics-and-health-management-figure-2.jpg)
![Figure 3. Flowchart of FMMEA process [18,19].](/paper-figures/420bc8106277433aac3aac67f8e13a58/sensor-systems-for-prognostics-and-health-management-figure-3.jpg)
![Figure 4. Schematic figure of PME-based MLCC [21].](/paper-figures/64a2107e189c4f9b9f4717cd9ed818fa/sensor-systems-for-prognostics-and-health-management-figure-4.jpg)
![Figure 5. ePrognostic sensor system [17].](/paper-figures/0aaeffedb42d402cb2fd98984f9f8458/sensor-systems-for-prognostics-and-health-management-figure-5.jpg)
![Figure 6. Example of sensing location [36] (Sensor card is put in the express card slot of a laptop).](/paper-figures/05a64a4f3c8341eb943bd7d0e471b982/sensor-systems-for-prognostics-and-health-management-figure-6.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“To sum up, these are the important issues when developing a PHM strategy for AV technology [49].”
From Sensor-Based Prognostic Health Management of Advanced Driver Assistance System for Autonomous Vehicles: A Recent Survey (2022) · cites this paper as [49]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless sensor networks: a survey
Akyildiz, I. F., Su, W., Sankarasubramaniam, Y., & Cayirci, E. (2002) · Computer Networks · doi:10.1016/s1389-1286(01)00302-4 · Cited by 17,523
A key-management scheme for distributed sensor networks
Eschenauer, L., & Gligor, V. D. (2002) · ACM SIGSAC Conference on Computer and Communications Security (CCS) · doi:10.1145/586110.586117 · Cited by 3,562
Energy Scavenging for Mobile and Wireless Electronics
Paradiso, J. A., & Starner, T. E. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.9 · Cited by 2,644
An Introduction to RFID Technology
Want, R. (2006) · IEEE Pervasive Computing · doi:10.1109/mprv.2006.2 · Cited by 1,766
Wireless sensor networks: A survey on the state of the art and the 802.15.4 and ZigBee standards
Baronti, P., Pillai, P., Chook, V., Chessa, S., Gotta, A., & Hu, Y. F. (2006) · Computer Communications · doi:10.1016/j.comcom.2006.12.020 · Cited by 1,431
Intelligent Fault Diagnosis and Prognosis for Engineering Systems
Vachtsevanos, G., Lewis, F. L., Roemer, M. J., Hess, A. J., & Wu, B. (2006) · Wiley eBooks · doi:10.1002/9780470117842 · Cited by 1,134
The Measurement, Instrumentation and Sensors Handbook
Webster, J. G. (1998) · CRC Press eBooks · doi:10.1201/9781003040019 · Cited by 1,051
Prognostics and Health Management of Electronics
PECHT, M. G. (2008) · Wiley eBooks · doi:10.1002/9780470385845 · Cited by 848
Prognostics methods for battery health monitoring using a bayesian framework
Saha, B., Goebel, K., Poll, S., & Christophersen, J. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2008.2005965 · Cited by 831
Instrumentation and measurement
(2012) · International Symposium on Electronics and Telecommunications (ISETC) · doi:10.1109/isetc.2012.6408158 · Cited by 580
Bièvre, P. D. (2009) · Clinical Biochemistry · doi:10.1016/j.clinbiochem.2008.09.007 · Cited by 530
(2005) · Elsevier eBooks · doi:10.1016/b978-0-7506-7729-5.x5040-x · Cited by 516
Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration-to-Electricity Conversion
Roundy, S. (2003) · Cited by 466
An overview of the Bluetooth wireless technology
Bisdikian, C. C. (2001) · IEEE Communications Magazine · doi:10.1109/35.968817 · Cited by 451
Prognostics and health management of electronics
Vichare, N. M., & PECHT, M. G. (2006) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2006.870387 · Cited by 434
Wireless Sensor Network Security: A Survey
Walters, J. P., Liang, Z., Shi, W., & Chaudhary, V. (2007) · Auerbach Publications eBooks · doi:10.1201/9780849379253-20 · Cited by 419
Prognostics and Health Management of Electronics
PECHT, M. G. (2008) · Encyclopedia of Structural Health Monitoring · doi:10.1002/9780470061626.shm118 · Cited by 288
Ultra-Wideband Technology for Short- or Medium-Range Wireless Communications
Foerster, J. (2001) · Cited by 283
Review of energy harvesting techniques and applications for microelectronics (Keynote Address)
Mateu, L., & Moll, F. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.613046 · Cited by 219
A Survey of Artificial Intelligence for Prognostics.
Schwabacher, M., & Goebel, K. (2007) · National Conference on Artificial Intelligence · Cited by 216
Mobile, Wireless, and Sensor Networks
Shorey, R., Ananda, A., Chan, M. C., & Ooi, W. T. (2005) · Wiley eBooks · doi:10.1002/0471755591 · Cited by 169
Guidelines for securing Radio Frequency Identification (RFID) systems
Karygiannis, A. T., Eydt, B., Barber, G., Bunn, L., & Phillips, T. (2007) · doi:10.6028/nist.sp.800-98 · Cited by 164
Physics-of-Failure: An Approach to Reliable Product Development
Pecht, M., & Dasgupta, A. (1995) · Journal of the IEST · doi:10.17764/jiet.2.38.5.y3561m03801h0082 · Cited by 140
Anomaly Detection Through a Bayesian Support Vector Machine
Sotiris, V. A., Tse, P. W.-T., & PECHT, M. G. (2010) · IEEE Transactions on Reliability · doi:10.1109/tr.2010.2048740 · Cited by 120
Prognostics implementation of electronics under vibration loading
Gu, J., Barker, D., & PECHT, M. G. (2007) · Microelectronics Reliability · doi:10.1016/j.microrel.2007.02.015 · Cited by 115
Pulsed magnetic flux leakage techniques for crack detection and characterisation
Sophian, A., Tian, G. Y., & Zairi, S. (2005) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2005.07.013 · Cited by 97
Self‐powered systems: a review of energy sources
Glynne‐Jones, P., & White, N. M. (2001) · Sensor Review · doi:10.1108/02602280110388252 · Cited by 97
A Wireless Sensor System for Prognostics and Health Management
Cheng, S., Tom, K. F., Thomas, L., & PECHT, M. G. (2010) · IEEE Sensors Journal · doi:10.1109/jsen.2009.2035817 · Cited by 83
Security in Distributed, Grid, Mobile, and Pervasive Computing
Xiao, Y. (2007) · Auerbach Publications eBooks · doi:10.1201/9780849379253 · Cited by 65
Early Detection of Interconnect Degradation by Continuous Monitoring of RF Impedance
Kwon, D., Azarian, M. H., & PECHT, M. G. (2009) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2009.2020170 · Cited by 63
AIP handbook of modern sensors: physics, designs and applications
(1993) · Choice Reviews Online · doi:10.5860/choice.31-2130 · Cited by 60
Application of Prognostic Health Management in Digital Electronic Systems
Kalgren, P. W., Baybutt, M., Ginart, A. E., Minnella, C., Roemer, M. J., & Dabney, T. (2007) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2007.352883 · Cited by 55
A Probabilistic Model for Information and Sensor Validation
Ibargüengoytia, P. H., Vadera, S., & Sucar, L. E. (2006) · The Computer Journal · doi:10.1093/comjnl/bxh142 · Cited by 43
Sensor performance specifications
Bernstein, D. S. (2001) · IEEE Control Systems · doi:10.1109/37.939939 · Cited by 43
A prognosis case study for electrolytic capacitor degradation in DC-DC converters
Kulkarni, C. S., Biswas, G., & Koutsoukos, X. (2009) · Cited by 42
(2007) · Cited by 42
Electronic prognostics – A case study using global positioning system (GPS)
Brown, D. W., Kalgren, P. W., Byington, C. S., & Roemer, M. J. (2007) · Microelectronics Reliability · doi:10.1016/j.microrel.2007.02.020 · Cited by 39
Moisture induced degradation of multilayer ceramic capacitors
Donahoe, D. N., PECHT, M. G., Lloyd, I. K., & Ganesan, S. (2005) · Microelectronics Reliability · doi:10.1016/j.microrel.2005.05.008 · Cited by 37
Fiber optic sensor for the monitoring of mixed mode cracks in structures
Wan, K. T., & Leung, C. K. Y. (2006) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2006.08.002 · Cited by 35
A divide and conquer approach to anomaly detection, localization and diagnosis
Liu, J., Djurdjanović, D., Marko, K. A., & Ni, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.05.016 · Cited by 34
In-Situ Corrosion Sensor for Coating Testing and Screening
Davis, G., Dacres, C. M., & Krebs, L. A. (2000) · Materials Performance · Cited by 29
Compact portable electric power sources
Lab., T. (. S. O. R. N., Fry, D. N., USDOE, W., Holcomb, D., Munro, J., Oakes, L., & Matson, M. (1997) · doi:10.2172/663584 · Cited by 23
Advanced Fault Isolation and Failure Analysis Techniques for Future Package Technologies
Pacheco, M. (2005) · Intel Technology Journal · doi:10.1535/itj.0904.07 · Cited by 23
Keimasi, M., Azarian, M. H., & PECHT, M. G. (2007) · Microelectronics Reliability · doi:10.1016/j.microrel.2006.12.005 · Cited by 21
Betts, B. A. (2006) · IEEE Spectrum · doi:10.1109/mspec.2006.1611760 · Cited by 20
Mechanism of Ceramic Capacitor Leakage Failures due to Low DC Stress
Sato, K., Ogata, Y., Ohno, K., & Ikeo, H. (1980) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/irps.1980.362940 · Cited by 14
Energy harvesting concepts for small electric unmanned systems
Qidwai, M. A., Thomas, J. P., Kellogg, J. C., & Baucom, J. N. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.540912 · Cited by 14
Jata, K. V., & Parthasarathy, T. A. (2011) · doi:10.1002/9781119994053.ch12 · Cited by 12
Computer Usage Monitoring for Design and Reliability Tests
Gu, J., Vichare, N. M., Tinsley, E. C., & PECHT, M. G. (2009) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2009.2013202 · Cited by 12
A residual estimation based approach for isolating faulty parameters
Kumar, S., Dolev, E., PECHT, M. G., & Pompetzki, M. (2009) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2009.4839669 · Cited by 4
Research works printed but not linked: 6
- (2004). Defense Acquisition Guidebook, Defense Acquisition University. Chapter 5.3.
- (2003). IEEE Standard 1413.1-2002—IEEE Guide for Selecting and Using Reliability Predictions Based on IEEE 1413, IEEE.
- RFID Journal Available online: http://www.rfidjournal.com/faq/17 and http://www.rfidjournal.com/faq/18/ (accessed on 22 July 2009).
- O’Hara, B., and Petrick, A. (2004). IEEE 802.11 Handbook: A Designer’s Companion, IEEE Press.
- STMicroelectronics STMicroelectronics Unveils Ultra-Low-Power Technology Platform for 8-Bit and 32-Bit Microcontrollers, Enabling Next-Generation Power-Saving Products. Available online: http://www.st.com/stonline/stappl/cms/press/news/year2009/p2389.htm/ (accessed on 20 July 2009).
- Akyildiz, 2002, Wireless Sensor Networks: A Survey, Comput. Netw, 4, 393, 10.1016/S1389-1286(01)00302-4 · DOI
Cited by
Sorted by citations
He, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105
Self-citationAn overview of time-based and condition-based maintenance in industrial application
Ahmad, R., & Kamaruddin, S. (2012) · Computers & Industrial Engineering · doi:10.1016/j.cie.2012.02.002 · Cited by 975
A review on condition-based maintenance optimization models for stochastically deteriorating system
Alaswad, S., & Xiang, Y. (2016) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2016.08.009 · Cited by 800
Advances in Electronic-Nose Technologies Developed for Biomedical Applications
Wilson, A. D., & Baietto, M. (2011) · Sensors · doi:10.3390/s110101105 · Cited by 414
A review on prognostics and health management (PHM) methods of lithium-ion batteries
Meng, H., & Li, Y. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109405 · Cited by 405
Metadata
- Authors
- Cheng, S., Azarian, M. H., & Pecht, M. G.
- Affiliations
- University of Maryland, College Park (US)
- City University of Hong Kong (HK)
- Corresponding author
- Pecht, Michael G.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2010-06-08
- Volume
- 10
- Issue
- 6
- Pages
- 5774-5797
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3247731
- OpenAlex
- W2149823865
- Cited by
- 188
- References
- 56
- Citations by year
- 2026: 4 · 2025: 10 · 2024: 9 · 2023: 8 · 2022: 10 · 2021: 13 · 2020: 13 · 2019: 11 · 2018: 17 · 2017: 9 · 2016: 16 · 2015: 16 · 2014: 11 · 2013: 12 · 2012: 18
- FWCI
- 6.71
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- CityU Scholars (submittedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Physics and Astronomy › Instrumentation › Sensor Technology and Measurement Systems
- Keywords
- prognostics and health management, sensor systems, sensor selection, remaining useful life prediction, product reliability, fault detection, sensor reliability, sensor cost, condition monitoring
- MeSH terms
- Computer Communication Networks, Health, Humans, Models, Biological, Monitoring, Physiologic, Prognosis, Biosensing Techniques, Delivery of Health Care, Integrated, Disease Management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
