Cited by 87Ultrasonics and Acoustic Wave PropagationStructural Health Monitoring TechniquesStructural Engineering and Materials Analysis

Advances in the Structural Health Monitoring of Bridges Using Piezoelectric Transducers

Open access
Chen, Yunzhu, Xue, Xingwei·2018·Sensors

Abstract

With the rapid development of the world’s transportation infrastructure, many long-span bridges were constructed in recent years, especially in China. However, these bridges are easily subjected to various damages due to dynamic loads (such as wind-, earthquake-, and vehicle-induced vibration) or environmental factors (such as corrosion). Therefore, structural health monitoring (SHM) is vital to guarantee the safety of bridges in their service lives. With its wide frequency response range, fast response, simple preparation process, ease of processing, low cost, and other advantages, the piezoelectric transducer is commonly employed for the SHM of bridges. This paper summarizes the application of piezoelectric materials for the SHM of bridges, including the monitoring of the concrete strength, bolt looseness, steel corrosion, and grouting density. For each problem, the application of piezoelectric materials in different research methods is described. The related data processing methods for four types of bridge detection are briefly summarized, and the principles of each method in practical application are listed. Finally, issues to be studied when using piezoelectric materials for monitoring are discussed, and future application prospects and development directions are presented.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/s18124312

Cites

115 of 115 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Temperature and structural responses are strongly correlated.

    “Temperature and structural responses are strongly correlated [149,150].”

    From Effects of Environmental and Operational Conditions on Structural Health Monitoring and Non-Destructive Testing: A Systematic Review (2023) · cites this paper as [150]

    Section 4.4, “Compensating Temperature Effects” (page not provided), says bridge dynamic characteristics are temperature-dependent and that temperature-related changes can mask changes caused by damage. This supports a relationship between temperature and structural responses, but the paper does not establish that they are strongly correlated. (LLM, conf=0.84)

    Experimental — accuracy not yet measured

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Cites

Flagged first, then by citations

2 of the 117 references couldn’t be matched to a known paper.

Research works printed but not linked: 12

  1. [12]Du G.-F. Zhang Z.-Z. Zhang D.-S. Multiple crack detection of pipeline using impedance-based structural health monitoring techniques J WUT 2013 30 101 105 10.3963/j.issn.1671-4431.2013.10.020 · DOI
  2. [16]Wang D.S. Jin K. Zhu H.P. Experimental study on cemented package of embedded piezoelectric impedance sensor J. Huazhong Univ. Sci. Technol. (Natural Sci. Ed.) 2010 38 113 116
  3. [37]Sun W. Yan S. Zhang Y. Numerical Simulation of Concrete Structure Health Monitoring Technology Based on Piezoelectric Ceramic Sensor Concrete 2008 34 38 10.3969/j.issn.1002-3550.2008.02.009 · DOI
  4. [54]Wang Y. Lu G.J. Wang Y. Xu Z.Z. Yao J.X. Review on the Application of Acoustic Emission Technology in Civil Engineering Prog. Water Resour. Hydropower Technol. Adv. Sci. Technol. Water Resour. 2012 32 89 94
  5. [57]Mohammed R. An insight into the NDT of steel cables by acoustic emission Proceedings of the 14th World Conference on Non-Destructive Testing New Delhi, India 8–13 December 1996
  6. [58]Paulson P.O. Continuous acoustic monitoring of suspension bridges and cable stays Proc. SPIE Int. Soc. Opt. Eng. 1998 3400 205 213
  7. [63]Giurgiutiu V. Structural Health Monitoring with Piezoelectric Wafer Active Sensors (Second Edition) Br. J. Ophthalmol. 2014 58 438 454
  8. [72]Quinn P. Palacios L. Carman G. Speyer J. Health monitoring of structures using directional piezoelectrics Proceedings of the ASME Mechanics and Materials Conference Blacksburg, VA, USA 27–30 June 1999 27 30
  9. [101]Li L. Research on Steel Bar Corrosion Monitoring in Concrete Structure Based on Piezoelectric Sensor Ph.D. Thesis Jinan Universty Guangzhou, China 2015
  10. [102]Li J.H. Deng Z.C. Du X.L. Application and development of FRP in bridge structure Highway 2007 58 65 10.3969/j.issn.0451-0712.2007.04.015 · DOI
  11. [121]Zhou W. On load identification for piezoelectric smart structures Acta Mech. Sin. 2004 36 10.6052/0459-1879-2004-4-2002-235 · DOI
  12. [134]Zhen-Ying X.U. Hong H. Liu H. Wang Y. A piezoelectric transducer for weld defec detection based on first-order shear horizontal (Sh1)mode Proceedings of the 2015 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA) Jinan, China 30 October–2 November 2015 251 255

Cited by

Sorted by citations

Authors
Chen, Y., & Xue, X.
Affiliations
Shenyang Jianzhu University (CN)
Corresponding author
Xue, Xingwei
Venue
Sensors
Publisher
MDPI AG
Published
2018-12-07
Volume
18
Issue
12
Pages
4312
ISSN
1424-8220 (ISSN-L)
OpenAlex
W2905349537
Cited by
87
References
117
Citations by year
2026: 11 · 2025: 11 · 2024: 16 · 2023: 14 · 2022: 13 · 2021: 12 · 2020: 7 · 2019: 3
FWCI
0.87
Type
journal article
Language
en
Open access
Locations
  • Sensors (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, other-oa)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Jinan University (2018YFC0809606, 20180930004)
  • Ministry of Education, India
Topics
  • Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Materials Analysis
Keywords
structural health monitoring, bridges, piezoelectric transducers, bolt looseness detection, long-span bridges, vibration-based damage detection, data processing methods
MeSH terms
China, Humans, Transducers, Transportation, Vibration, Equipment Failure Analysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review