The DOI matches its Crossref record.
Layer Contour Verification in Additive Manufacturing by Means of Commercial Flatbed Scanners
Open accessAbstract
Industrial adoption of additive manufacturing (AM) processes demands improvement in the geometrical accuracy of manufactured parts. One key achievement would be to ensure that manufactured layer contours match the correspondent theoretical profiles, which would require integration of on-machine measurement devices capable of digitizing individual layers. Flatbed scanners should be considered as serious candidates, since they can achieve high scanning speeds at low prices. Nevertheless, image deformation phenomena reduce their suitability as two-dimensional verification devices. In this work, the possibilities of using flatbed scanners for AM contour verification are investigated. Image distortion errors are characterized and discussed and special attention is paid to the plication effect caused by contact imaging sensor (CIS) scanners. To compensate this phenomena, a new local distortion adjustment (LDA) method is proposed and its distortion correction capabilities are evaluated upon actual layer contours manufactured on a fused filament fabrication (FFF) machine. This proposed method is also compared to conventional global distortion adjustment (GDA). Results reveal quasi-systematic deformations of the images which could be minimized by means of distortion correction. Nevertheless, the irregular nature of such a distortion and the superposition of different errors penalize the use of GDA, to the point that it should not be used with CIS scanners. Conclusions indicate that LDA-based correction would enable the use of flatbed scanners in AM for on-machine verification tasks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
K, N., & Rout, C. S. (2021) · RSC Advances · doi:10.1039/d0ra07800j · Cited by 1,354
Advances in healthcare wearable devices
Iqbal, S. M. A., Mahgoub, I., Du, E., Leavitt, M. A., & Asghar, W. (2021) · npj Flexible Electronics · doi:10.1038/s41528-021-00107-x · Cited by 714
Himeur, Y., Ghanem, K., Alsalemi, A., Bensaali, F., & Amira, A. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116601 · Cited by 660
Bwambale, E., Abagale, F. K., & Anornu, G. K. (2022) · Agricultural Water Management · doi:10.1016/j.agwat.2021.107324 · Cited by 654
Molecularly imprinted polymer-based electrochemical sensors for environmental analysis
Rebelo, P., Costa-Rama, E., Seguro, I., Pacheco, J. G., Nouws, H. P. A., Cordeiro, M. N. D. S., & Delerue-Matos, C. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112719 · Cited by 325
Metadata
- Authors
- Blanco, D., Fernandez, P., Noriega, A., Alvarez, B. J., & Valiño, G.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2019-12-18
- Volume
- 20
- Issue
- 1
- Pages
- 1
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2995102710
- Cited by
- 212
- References
- 0
- FWCI
- 22.55
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Layer Contour Verification in Additive Manufacturing by Means of Commercial Flatbed Scanners. https://app.cochat.ai/papers/10.3390/s20010001
- The paper
- Blanco, D., Fernandez, P., Noriega, A., Alvarez, B. J., & Valiño, G. (2019). Layer Contour Verification in Additive Manufacturing by Means of Commercial Flatbed Scanners. Sensors. https://doi.org/10.3390/s20010001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.