Scalable Fleet Monitoring and Visualization for Smart Machine Maintenance and Industrial IoT Applications
Open accessThe DOI matches its Crossref record; 27 of the 29 references it cites were found in a registry or an index.
Abstract
The wide adoption of smart machine maintenance in manufacturing is blocked by open challenges in the Industrial Internet of Things (IIoT) with regard to robustness, scalability and security. Solving these challenges is of uttermost importance to mission-critical industrial operations. Furthermore, effective application of predictive maintenance requires well-trained machine learning algorithms which on their turn require high volumes of reliable data. This paper addresses both challenges and presents the Smart Maintenance Living Lab, an open test and research platform that consists of a fleet of drivetrain systems for accelerated lifetime tests of rolling-element bearings, a scalable IoT middleware cloud platform for reliable data ingestion and persistence, and a dynamic dashboard application for fleet monitoring and visualization. Each individual component within the presented system is discussed and validated, demonstrating the feasibility of IIoT applications for smart machine maintenance. The resulting platform provides benchmark data for the improvement of machine learning algorithms, gives insights into the design, implementation and validation of a complete architecture for IIoT applications with specific requirements concerning robustness, scalability and security and therefore reduces the reticence in the industry to widely adopt these technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
That ‘Internet of Things’ Thing
Ashton, K. J. (1999) · Medical Entomology and Zoology · Cited by 2,555
PRONOSTIA : An experimental platform for bearings accelerated degradation tests.
Nectoux, P., Gouriveau, R., Medjaher, K., Ramasso, E., Chebel‐Morello, B., Noureddine Zerhouni, A., & Varnier, C. (2012) · HAL · Cited by 928
Industrial internet of things: Recent advances, enabling technologies and open challenges
Khan, W. Z., Rehman, M. H., Zangoti, H. M., Afzal, M. K., Armi, N., & Salah, K. (2020) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2019.106522 · Cited by 613
Deploying Fog Computing in Industrial Internet of Things and Industry 4.0
Aazam, M., Zeadally, S., & Harras, K. A. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2855198 · Cited by 567 · cited 1×
“These requirements apply to each component within the overall IIoT architecture [6].”
BackgroundMicroservices: The Journey So Far and Challenges Ahead
Jamshidi, P., Pahl, C., Mendonca, N. C., Lewis, J., & Tilkov, S. (2018) · IEEE Software · doi:10.1109/ms.2018.2141039 · Cited by 554 · cited 1×
“Firstly, the architecture is in compliance with the Microservice-based Architecture (MSA) [33].”
MethodPrognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators
Wang, D., Tsui, K.-L., & Miao, Q. (2018) · IEEE Access · doi:10.1109/access.2017.2774261 · Cited by 455 · cited 1×
“The resulting monitoring data can be used by state-of-the-art machine learning algorithms to calculate an estimate of the Remaining Useful Life (RUL) of the assets [8].”
MethodInternet of Things: A survey of enabling technologies in healthcare and its applications
Dhanvijay, M. M., & Patil, S. C. (2019) · Computer Networks · doi:10.1016/j.comnet.2019.03.006 · Cited by 374 · cited 1×
“Over the past decade, this paradigm has been applied to research areas such as smart environments [2], healthcare [3] and logistics [4].”
BackgroundAgent-based Internet of Things: State-of-the-art and research challenges
Savaglio, C., Ganzha, M., Paprzycki, M., Bădică, C., Ivanović, M., & Fortino, G. (2020) · Future Generation Computer Systems · doi:10.1016/j.future.2019.09.016 · Cited by 214
Internet of Things for enabling smart environments: A technology-centric perspective
Gómez, C., Chessa, S., Fleury, A., Roussos, G., & Preuveneers, D. (2019) · Journal of Ambient Intelligence and Smart Environments · doi:10.3233/ais-180509 · Cited by 174 · cited 1×
“Over the past decade, this paradigm has been applied to research areas such as smart environments [2], healthcare [3] and logistics [4].”
BackgroundSuitability of MEMS Accelerometers for Condition Monitoring: An experimental study
Albarbar, A., Mekid, S., Starr, A., & Pietruszkiewicz, R. (2008) · Sensors · doi:10.3390/s8020784 · Cited by 162
Research works printed but not linked: 2
- Lachev, T., and Price, E. (2017). Applied Microsoft Power BI: Bring Your Data to Life!, Prologika Press.
- Recordon, D., and Reed, D. (November, January 30). OpenID 2.0: A platform for user-centric identity management. Proceedings of the Second ACM Workshop on Digital Identity Management, Alexandria, VA, USA.
Cited by
Upgrading the manufacturing sector via applications of Industrial Internet of Things (IIoT)
Javaid, M., Haleem, A., Singh, R. P., Rab, S., & Suman, R. (2021) · Sensors International · doi:10.1016/j.sintl.2021.100129 · Cited by 192
Key Challenges and Emerging Technologies in Industrial IoT Architectures: A Review
Mirani, A. A., Velasco-Hernandez, G., Awasthi, A., & Walsh, J. (2022) · Sensors · doi:10.3390/s22155836 · Cited by 119
“To improve the lack of predictive maintenance in IIoT applications, reference [87] proposes the smart-machine maintenance model based on edge and cloud computing that addresses network scalability, security, and low latency.”
MethodLiu, Y., Yu, W., Dillon, T. S., Rahayu, W. J., & Li, M. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3091774 · Cited by 122
A Survey on the Role of Industrial IoT in Manufacturing for Implementation of Smart Industry
Farooq, M. S., Abdullah, M., Riaz, S., Alvi, A., Rustam, F., Flores, M. Á. L., Galán, J. C., Samad, M. A., & Ashraf, I. (2023) · Sensors · doi:10.3390/s23218958 · Cited by 128
“IIoT consists of smart sensors that can send information about machines, fleets, and components and monitor the production system [85].”
BackgroundA survey of modeling for prognosis and health management of industrial equipment
Yucesan, Y., Dourado, A. D. P., & Viana, F. A. C. (2021) · Advanced Engineering Informatics · doi:10.1016/j.aei.2021.101404 · Cited by 107
“For example, Moens et al. [244] discuss the implementation of a middleware cloud platform suitable for the industrial internet of things that considers reliable data ingestion and persistence, and a dynamic dashboard application for fleet monitoring and visualization.”
BackgroundLiu, Y., Yu, W., Rahayu, W. J., & Dillon, T. S. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3246100 · Cited by 104
“[115] adopted a scalable three-tier IIoT architecture for smart machine maintenance”
MethodSmart Manufacturing Real-Time Analysis Based on Blockchain and Machine Learning Approaches
Shahbazi, Z., & Byun, Y.-C. (2021) · Applied Sciences · doi:10.3390/app11083535 · Cited by 73
Calderón, D., Folgado, F. J., González, I., & Calderón, A. J. (2024) · Sensors · doi:10.3390/s24248074 · Cited by 75
“A three-tiered architecture for IIoT is proposed in [22], being validated in an experimental benchmark through a visualization dashboard.”
Gardner, P. A., Bull, L. A., Gosliga, J., Poole, J., Dervilis, N., & Worden, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.108918 · Cited by 58
Smart retrofitting in maintenance: a systematic literature review
Sanchez-Londoño, D., Barbieri, G., & Fumagalli, L. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-02002-2 · Cited by 60
“Existing data analysis and visualization dashboards (such as Power BI, Tableau, and Google Data Studio) have been found to be incompatible with sensor data streams and streaming technologies, but instead operate properly only on classical data storage (Moens et al., 2020).”
Graphene based Web Framework for Energy Efficient IoT Applications
Chen, J. I. Z., & Yeh, L.-T. (2021) · Journal of Information Technology and Digital World · doi:10.36548/jitdw.2021.1.003 · Cited by 51
Design and evaluation of a scalable Internet of Things backend for smart ports
Bracke, V., Sebrechts, M., Moons, B., Hoebeke, J., Turck, F. D., & Volckaert, B. (2021) · Software Practice and Experience · doi:10.1002/spe.2973 · Cited by 45
Self-citationEyeleko, A. H., & Feng, T. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3308195 · Cited by 38
“IIoT systems can assist in the real-time monitoring of conveyor belt production flow [8].”
BackgroundAn IIoT-Based Approach to the Integrated Management of Machinery in the Construction Industry
Sánchez, O. T., Raposo, D., Rodrigues, A., Boavida, F., Mărculescu, R., Chen, K., & Silva, J. S. (2023) · IEEE Access · doi:10.1109/access.2023.3236254 · Cited by 34
“In [36], Scalable Fleet Monitoring and Visualization for Smart Machine Maintenance and Industrial IoT Applications”
BackgroundA Semi-Supervised Approach with Monotonic Constraints for Improved Remaining Useful Life Estimation
Avendano, D. N., Vandermoortele, N., Soete, C., Moens, P., Ompusunggu, A. P., Deschrijver, D., & Hoecke, S. V. (2022) · Sensors · doi:10.3390/s22041590 · Cited by 31
“Therefore, it offers the opportunity for training and evaluating robust models [5,27].”
BackgroundSelf-citationImplementation and Transfer of Predictive Analytics for Smart Maintenance: A Case Study
von Enzberg, S., Naskos, A., Metaxa, I. N., Köchling, D., & Kühn, A. (2020) · Frontiers in Computer Science · doi:10.3389/fcomp.2020.578469 · Cited by 22
Enabling and Leveraging AI in the Intelligent Edge: A Review of Current Trends and Future Directions
Goethals, T., Volckaert, B., & Turck, F. D. (2021) · IEEE Open Journal of the Communications Society · doi:10.1109/ojcoms.2021.3116437 · Cited by 23
Self-citationIndustry 4.0: A Proposal of Paradigm Organization Schemes from a Systematic Literature Review
Rocha-Jácome, C., Carvajal, R. G., Muñoz, F., Guevara-Cabezas, E. A., & Fort, E. H. (2021) · Sensors · doi:10.3390/s22010066 · Cited by 23
Quality characteristics in IoT systems: learnings from an industry multi case study
Alkhabbas, F., Munir, H., Spalazzese, R., & Davidsson, P. (2025) · Discover Internet of Things · doi:10.1007/s43926-025-00094-9 · Cited by 16
Efficient Practices of Cognitive Technology Application for Smart Manufacturing
Sira, M. (2022) · Management Systems in Production Engineering · doi:10.2478/mspe-2022-0023 · Cited by 13
Tolbert, C. L. (2025) · NDT · doi:10.3390/ndt3020007 · Cited by 12
“While very few parameters of early VFDs were available for export for reliability analysis and NDT, modern designs offer most of these parameters for the user’s benefit [7,11,12].”
InfluentialCreating Scalable Semantic Data Models with Tableau and Power BI
Rachamala, N. R. (2024) · International Journal of Intelligent Systems and Applications in Engineering · doi:10.17762/ijisae.v12i23s.7784 · Cited by 12
IIoT for Factory Optimization and Logistics Management using PTC Thingworx and Kepware
Doshi, S., Ghatage, P., & Borole, R. (2023) · International Conference on Emerging Trends in Engineering and Technology (ICETET) · doi:10.1109/icetet-sip58143.2023.10151537 · Cited by 10
The Internet of Things and AI-based optimization within the Industry 4.0 paradigm
Mikołajewski, D., Czerniak, J. M., Piechowiak, M., Węgrzyn-Wolska, K. M., & Kacprzyk, J. (2023) · Bulletin of the Polish Academy of Sciences Technical Sciences · doi:10.24425/bpasts.2023.147346 · Cited by 13
Paepe, D. D., Hautte, S. V., Steenwinckel, B., Moens, P., Vaneessen, J., Vandekerckhove, S., Volckaert, B., Ongenae, F., & Hoecke, S. V. (2021) · Applied Sciences · doi:10.3390/app112411932 · Cited by 10
Self-citationMoens, P., Hautte, S. V., Paepe, D. D., Steenwinckel, B., Verstichel, S., Vandekerckhove, S., Ongenae, F., & Hoecke, S. V. (2021) · Applied Sciences · doi:10.3390/app112110371 · Cited by 9
“While the currently implemented system already uses the Obelisk stack through a consumer-producer paradigm [3], a clear evaluation investigating the load and the possible user burden of such a system is still needed.”
BackgroundMethodInfluentialSelf-citationMaintenance 4.0: A Literature Review and SWOT Analysis
Ribeiro, D. R. S., Mendes, L. G., Forcellini, F. A., & Frazzon, E. M. (2022) · Lecture notes in logistics · doi:10.1007/978-3-031-05359-7_33 · Cited by 8
Ubiquitous System Integration as a Service in Smart Factories
Soderi, M., Kamath, V., Morgan, J., & Breslin, J. G. (2021) · IEEE International Conference on Internet of Things and Intelligence Systems (IoTaIS) · doi:10.1109/iotais53735.2021.9628434 · Cited by 8
“…ecosystem, via state-of-the-art reviewers and technical articles relating to Advanced Sensor Technologies [9], Digital Platforms [3], Cloud [4], Production Monitoring and Visualization [10], Preventative Maintenance [11], Security [12], Industrial Communication [13] and Robotic Control [14].”
BackgroundTian, H., & Huang, G. (2024) · Electronics · doi:10.3390/electronics13234812 · Cited by 7
Dashboard proposition for health monitoring of production system in the automotive industry
Einabadi, B., Mohammad-Amini, M., Baboli, A., & Rother, E. (2021) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2021.08.091 · Cited by 7
Transfer Learning for Anomaly Detection Using Bearings' Vibration Signals
Avendano, D. N., Deschrijver, D., & Hoecke, S. V. (2023) · The International Journal of Acoustics and Vibration · doi:10.20855/ijav.2023.28.41993 · Cited by 5
“1,66 The data is rich in the variety of operating conditions, al.”
BackgroundMaiwada, U. D., Danyaro, K. U., Alam, A. J., & Abdullahi, M. (2023) · UMYU Scientifica · doi:10.56919/usci.2324.025 · Cited by 7
Intelligent Real Time Monitoring Module Designed for Helmet and Number Plate Detection
Negi, H. S., Dimri, S. C., Kumar, B., Jahan, A., Mehra, G., & Pandey, C. (2025) · International Conference on Communication, Security and Artificial Intelligence (ICCSAI) · doi:10.1109/iccsai64074.2025.11064708 · Cited by 3
“[2] By utilizing profound learning models and high-level PC vision methods, these calculations can gain from huge datasets and adjust to different situations.”
Improve industrial performance based on systematic analyses of manufacturing data
Lisboa, M., JESUS, E. R. D., Seixas, R. D. M., Valle, P. D., Deschamps, F., & Strobel, C. (2021) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2021.08.083 · Cited by 3
Multiobjective Optimization of Public Health Service Delivery Networks
Escobar, J. W., Giraldo, J., Londoño, D., & Linfati, R. (2023) · Ciencia e Ingeniería Neogranadina · doi:10.18359/rcin.6353 · Cited by 3
A new remote monitoring device to track magnetic resonance imaging machine cooling system failures
Allam, O. E., & Hamlich, M. (2022) · Indonesian Journal of Electrical Engineering and Computer Science · doi:10.11591/ijeecs.v25.i1.pp298-306 · Cited by 2
Lightweight IT Operation and Maintenance Integrated Monitoring Method for APP System
Wang, X., & Chen, R. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2209/1/012012 · Cited by 2
“However, due to the reasons of manual technology, the operation and maintenance monitoring effect is poor, and it will consume a lot of human, material and financial resources, so the manual monitoring does not have a certain ductility [4].”
BackgroundJin, C. C., Yang, X., Ma, H., Wu, X., & Yang, G. (2022) · Advances in Mechanical Engineering · doi:10.1177/16878132221130573 · Cited by 2
“8 With the application of degradation data to reliability assessment, and the advantages of the wide source of degradation data and a large amount of data, many scholars have begun to apply the degradation data to reliability assessment.”
MethodSantos, F. W. S. D., & Hahn, I. S. (2023) · Multidisciplinary Business Review · doi:10.35692/07183992.16.2.6 · Cited by 4
“In most of the cases it dealt with equipment and was linked to monitoring and visualisation (Moens et al., 2020), fault detections (Marino et al., 2021), reliability (Elsisi et al, 2020), tool wear predictions (Wu et al., 2017), and frameworks focused on better equipment performance– as set forth…”
BackgroundUnsupervised Transfer Learning Across Different Data Modalities for Bearing's Speed Identification
Avendano, D. N., Deschrijver, D., & Hoecke, S. V. (2024) · The International Journal of Acoustics and Vibration · doi:10.20855/ijav.2024.29.22046 · Cited by 2
“2,46 This dataset was previously evaluated for the remaining useful life estimation task using a set of engineered features, as well as for TL across different operating conditions.”
MethodVenuta, M., Zambetti, M., Pirola, F., Pezzotta, G., Grasseni, P., Ferrari, M., & Salvi, S. (2021) · IFIP advances in information and communication technology · doi:10.1007/978-3-030-85969-5_48 · Cited by 2
AI Enabled Human and Machine Activity Monitoring in Industrial IoT Systems
Saha, A., Saha, J., Mallik, M., & Chowdhury, C. (2023) · Engineering cyber-physical systems and critical infrastructures · doi:10.1007/978-3-031-31952-5_2 · Cited by 1
Apolo, J. D. P., Robles, J. L. B., Zhicay, J. L. D., Guerrero, R. X. C., Guarochico, W. F. A., & Egas, P. F. B. (2026) · Sensors · doi:10.3390/s26092772 · Cited by 1
“Within Node-RED, processing flows are implemented to structure the data and prepare it for transmission using communication protocols based on web services [35].”
Dhakshnamoorthy, G., Sridhar, J., Ramanathan, R., & Dharmalingam, M. (2024) · Quality and Reliability Engineering International · doi:10.1002/qre.3530 · Cited by 1
Scalability of Pervasive Communication Networks in IoT
Khayyat, M. M., & Akkari, N. (2022) · International Journal of Hyperconnectivity and the Internet of Things · doi:10.4018/ijhiot.294895
Ogihara, S., Kato, T., Kawasaki, T., Okura, Y., & Iwamoto, T. (2023) · IEEE International Conference on Embedded and Real-Time Computing Systems and Applications (RTCSA) · doi:10.1109/rtcsa58653.2023.00042
Design and Application of Data-Driven Visualization Platform for Dual Robotic Arms Assembly Process
Gong, X., & Duan, J. (2024) · Mechanisms and machine science · doi:10.1007/978-981-97-0922-9_19
Assets Maintenance Strategy Based on Operational Data Analysis
Seixas, R. D. M. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-36-0320
Betancourt, J., da Silva, L. D., Batista, M., Correia, R., Váz, P., da Silva, J. P. L. R., Martins, P., & Abbasi, M. (2025) · Advances in intelligent systems and computing · doi:10.1007/978-3-031-99474-6_16
Puranik, S., & Mahmood, Y. (2025) · Diva portal (Dalarna University Library)
Scalable and flexible low-resource service orchestration for enabling smart cities
Goethals, T. (2022) · Ghent University Academic Bibliography (Ghent University)
Insight mining in time series data with applications for anomaly detection
Paepe, D. D. (2021) · Ghent University Academic Bibliography (Ghent University)
PREDSHIP - APLICATIVO PARA INSPEÇÕES DE EQUIPAMENTOS AUXILIARES DE EMBARCAÇÕES
CARDOSO, D. L. (2026) · Revista Científica Semana Acadêmica · doi:10.35265/2236-6717-271-13213
Primero-Huerta, C., Guadarrama-Osorio, L.-A., Cruz-Mendoza, M.-C., & Sánchez-DelaCruz, E. (2026) · International Journal of Combinatorial Optimization Problems and Informatics. · doi:10.61467/2007.1558.2026.v17i4.1296
Predictive Maintenance in Industrial Internet of Things: Current Status
Chaudhry, S., Khan, A. S., Seher, A., Iftikhar, F., & Amjad, S. (2024) · International Journal of Innovations in Science and Technology · doi:10.33411/ijist/1083
Logistics 5.0: From smart networks to sustainable ecosystems in the retail sector
Sheikh, A. A., Hassan, N. M., Zafar, H., Yu, Z., & Khan, S. A. R. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-30094-3.00002-3
Metadata
- Authors
- Moens, P., Bracke, V., Soete, C., Vanden Hautte, S., Nieves Avendano, D., Ooijevaar, T., Devos, S., Volckaert, B., & Van Hoecke, S.
- Affiliations
- Ghent University (BE)
- IDLab, Ghent University—imec, Technologiepark-Zwijnaarde 122, 9052 Gent, Belgium
- Flanders Make (Belgium) (BE)
- Corresponding author
- Moens, Pieter
- ORCID
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2020-08-02
- Volume
- 20
- Issue
- 15
- Pages
- 4308
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC7435597
- OpenAlex
- W3046229754
- Cited by
- 50
- References
- 29
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 8 · 2023: 11 · 2022: 10 · 2021: 14 · 2020: 1
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Ghent University Academic Bibliography (Ghent University) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Agentschap Innoveren en Ondernemen
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Keywords
- Industrial Internet of Things, predictive maintenance, fleet monitoring, data visualization, rolling bearings, accelerated life testing, drivetrain, IoT middleware, benchmark dataset, IIoT architecture, scalability, security (computing)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.