The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends
Open accessAbstract
The complex structure of turning aggravates obtaining the desired results in terms of tool wear and surface roughness. The existence of high temperature and pressure make difficult to reach and observe the cutting area. In-direct tool condition, monitoring systems provide tracking the condition of cutting tool via several released or converted energy types, namely, heat, acoustic emission, vibration, cutting forces and motor current. Tool wear inevitably progresses during metal cutting and has a relationship with these energy types. Indirect tool condition monitoring systems use sensors situated around the cutting area to state the wear condition of the cutting tool without intervention to cutting zone. In this study, sensors mostly used in indirect tool condition monitoring systems and their correlations between tool wear are reviewed to summarize the literature survey in this field for the last two decades. The reviews about tool condition monitoring systems in turning are very limited, and relationship between measured variables such as tool wear and vibration require a detailed analysis. In this work, the main aim is to discuss the effect of sensorial data on tool wear by considering previous published papers. As a computer aided electronic and mechanical support system, tool condition monitoring paves the way for machining industry and the future and development of Industry 4.0.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Support Vector Machines and Other Kernel-based Learning Methods
Cristianini, N., & Shawe-Taylor, J. (2000) · doi:10.1017/cbo9780511801389 · Cited by 13,855
An Introduction to Support Vector Machines
Cristianini, N., & Shawe-Taylor, J. S. (2000) · ePrints Soton (University of Southampton) · Cited by 4,115
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997 · cited 1×
“Recent advice in the field of health manufac ‐ turing indicates the importance of these state ‐ of ‐ art techniques especially in fault diagnosis [167].”
BackgroundDeep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Literature review of Industry 4.0 and related technologies
Oztemel, E., & Gursev, S. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1433-8 · Cited by 2,143
Support vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
Advanced monitoring of machining operations
Teti, R., Jemielniak, K., O’Donnell, G., & Dornfeld, D. (2010) · CIRP Annals · doi:10.1016/j.cirp.2010.05.010 · Cited by 1,354
“Industrie 4.0” and Smart Manufacturing – A Review of Research Issues and Application Examples
Thoben, K.-D., BIBA – Bremer Institut für Produktion und Logistik GmbH, T. U. O. B., Wiesner, S., Wuest, T., Faculty of Production Engineering, U. O. B., & Industrial and Management Systems Engineering (2017) · International Journal of Automation Technology · doi:10.20965/ijat.2017.p0004 · Cited by 1,133
Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks
Zhao, R., Yan, R., Wang, J., & Mao, K. (2017) · Sensors · doi:10.3390/s17020273 · Cited by 741
Sensor signals for tool-wear monitoring in metal cutting operations—a review of methods
Dimla, D. E. (2000) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(99)00122-4 · Cited by 696
Cited by
Pimenov, D. Y., Bustillo, A., Wojciechowski, S., Sharma, V. S., Gupta, M. K., & Kuntoğlu, M. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01923-2 · Cited by 369
Self-citationGawde, S., Patil, S., Kumar, S., Kamat, P., Kotecha, K., & Abraham, A. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106139 · Cited by 306
Giordano, M., Baumann, N., Crabolu, M., Fischer, R., Bellusci, G., & Magno, M. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3165816 · Cited by 72
Metadata
- Authors
- Kuntoğlu, M., Aslan, A., Pimenov, D. Y., Usca, Ü. A., Salur, E., Gupta, M. K., Mikolajczyk, T., Giasin, K., Kapłonek, W., & Sharma, S.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2020-12-26
- Volume
- 21
- Issue
- 1
- Pages
- 108
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W3114814413
- Cited by
- 297
- References
- 69
- FWCI
- 20.32
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends. https://app.cochat.ai/papers/10.3390/s21010108
- The paper
- Kuntoğlu, M., Aslan, A., Pimenov, D. Y., Usca, Ü. A., Salur, E., Gupta, M. K., Mikolajczyk, T., Giasin, K., Kapłonek, W., & Sharma, S. (2020). A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends. Sensors. https://doi.org/10.3390/s21010108
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.