Application of C-LSTM Networks to Automatic Labeling of Vehicle Dynamic Response Data for Bridges
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Maintaining bridges that support road infrastructure is critical to the economy and human life. Structural health monitoring of bridges using vibration includes direct monitoring and drive-by monitoring. Drive-by monitoring uses a vehicle equipped with accelerometers to drive over bridges and estimates the bridge’s health from the vehicle vibration obtained. In this study, we attempt to identify the driving segments on bridges in the vehicle vibration data for the practical application of drive-by monitoring. We developed an in-vehicle sensor system that can measure three-dimensional behavior, and we propose a new problem of identifying the driving segment of vehicle vibration on a bridge from data measured in a field experiment. The “on a bridge” label was assigned based on the peaks in the vehicle vibration when running at joints. A supervised binary classification model using C-LSTM (Convolution—Long-Term Short Memory) networks was constructed and applied to data measured, and the model was successfully constructed with high accuracy. The challenge is to build a model that can be applied to bridges where joints do not exist. Therefore, future work is needed to propose a running label on bridges based on bridge vibration and extend the model to a multi-class model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The problem of data temporal and spatial feature extraction can be solved using a combination of the CNN and RNN methods, such as CNN with GRU [64,109,123], CNN with LSTM [27,178,179,180,181,182], CNN with Auto-encoder and [183], CNN with echo state networks [113], etc.”
From Deep Learning for Structural Health Monitoring: Data, Algorithms, Applications, Challenges, and Trends (2023) · cites this paper as [180]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hochreiter, S., & Schmidhuber, J. (1997) · Neural Computation · doi:10.1162/neco.1997.9.8.1735 · Cited by 102,318 · cited 1×
“In addition, for the gradient exploding or vanishing problem caused by general RNNs, a LSTM unit can be introduced to analyze the data, including past information (Hochreiter and Schmidhuber [20]).”
MethodLong-term recurrent convolutional networks for visual recognition and description
Donahue, J., Hendricks, L. A., Guadarrama, S., Rohrbach, M., Venugopalan, S., Darrell, T., & Saenko, K. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298878 · Cited by 5,228 · cited 3×
“Neural networks are used in various fields, most notably in speech recognition and natural language processing, where they have shown excellent performance (Donahue et al., 2015 [18]).”
MethodLong-Term Recurrent Convolutional Networks for Visual Recognition and Description
Donahue, J., Hendricks, L. A., Rohrbach, M., Venugopalan, S., Guadarrama, S., Saenko, K., & Darrell, T. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2599174 · Cited by 1,547
Predicting residential energy consumption using CNN-LSTM neural networks
Kim, T.-Y., & Cho, S.-B. (2019) · Energy · doi:10.1016/j.energy.2019.05.230 · Cited by 1,469 · cited 3×
“In this study, the C-LSTM model examined by Kim and Cho (2018) [21] and Kim and Cho (2019) [22] is used as a reference, and it is composed of convolution, activation, pooling, LSTM, and dense layer.”
BackgroundMethodExtracting bridge frequencies from the dynamic response of a passing vehicle
Yang, Y.-B., Lin, C. W., & Yau, J. D. (2004) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(03)00378-x · Cited by 767
Use of a passing vehicle to scan the fundamental bridge frequencies: An experimental verification
Lin, C. W., & Yang, Y. B. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.06.016 · Cited by 426 · cited 1×
“For example, Lin and Yang (2005) [2] experimentally extracted the bridge’s natural frequency from the Fourier’s power spectrum of the measured vehicle vibration.”
BackgroundWeb traffic anomaly detection using C-LSTM neural networks
Kim, T.-Y., & Cho, S.-B. (2018) · Expert Systems with Applications · doi:10.1016/j.eswa.2018.04.004 · Cited by 340 · cited 3×
“In this study, the C-LSTM model examined by Kim and Cho (2018) [21] and Kim and Cho (2019) [22] is used as a reference, and it is composed of convolution, activation, pooling, LSTM, and dense layer.”
BackgroundMethodA review of indirect bridge monitoring using passing vehicles
Malekjafarian, A., McGetrick, P. J., & OBrien, E. J. (2015) · Shock and Vibration · doi:10.1155/2015/286139 · Cited by 250 · cited 1×
“In addition, multiple runs are a promising approach for drive-by monitoring to overcome the problems of road surface irregularities, environmental effects, and limited measurement time [14].”
BackgroundYang, Y. B., & Chang, K. C. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.11.028 · Cited by 239 · cited 2×
“Sensors 2022, 22, 3486. https://doi.org/10.3390/s22093486 https://www.mdpi.com/journal/sensors Sensors 2022, 22, 3486 2 of 12 Yang and Chang (2009) [3,4] tried to estimate the bridge’s natural frequencies accurately for considering its application to bridge damage detection.”
BackgroundInfluentialExtracting the bridge frequencies indirectly from a passing vehicle: Parametric study
Yang, Y. B., & Chang, K. C. (2009) · Engineering Structures · doi:10.1016/j.engstruct.2009.06.001 · Cited by 182 · cited 2×
“Sensors 2022, 22, 3486. https://doi.org/10.3390/s22093486 https://www.mdpi.com/journal/sensors Sensors 2022, 22, 3486 2 of 12 Yang and Chang (2009) [3,4] tried to estimate the bridge’s natural frequencies accurately for considering its application to bridge damage detection.”
BackgroundInfluential
Research works printed but not linked: 3
- Murai, R., Miyamoto, R., Yamamoto, K., and Okada, Y. (2019, January 3–5). Numerical Experiments of Bridge Position Estimation for On-Going Monitoring. Proceedings of the World Congress on Engineering 2019, London, UK.
- Shin, R., Okada, Y., and Yamamoto, K. (2021, January 7–9). Field Experiments and Predicting using C-LSTM Networks of Bridge Position Estimation. Proceedings of the World Congress on Engineering 2021, Online.
- Zhou, C., Sun, C., Liu, Z., and Lau, F. (2015). A C-LSTM neural network for text classification. arXiv.
Cited by
Jia, J., & Li, Y. (2023) · Sensors · doi:10.3390/s23218824 · Cited by 182
Malekjafarian, A., Corbally, R., & Gong, W. (2022) · Structures · doi:10.1016/j.istruc.2022.08.075 · Cited by 181
Operational Modal Analysis on Bridges: A Comprehensive Review
Hasani, H., & Freddi, F. (2023) · Infrastructures · doi:10.3390/infrastructures8120172 · Cited by 68
Multidamage Detection of Breathing Cracks in Plate‐Like Bridges: Experimental and Numerical Study
Wang, C., Gao, K., Yang, Z., Liu, J., & Wu, G. (2024) · Structural Control and Health Monitoring · doi:10.1155/2024/8840611 · Cited by 10
Discussion on a Vehicle–Bridge Interaction System Identification in a Field Test
Shin, R., Okada, Y., & Yamamoto, K. (2023) · Sensors · doi:10.3390/s23010539 · Cited by 7
“The instrumentation and testing details are presented in [48].”
BackgroundMethodSelf-citation
Metadata
- Authors
- Shin, R., Okada, Y., & Yamamoto, K.
- Affiliations
- University of Tsukuba (JP)
- Corresponding author
- Yamamoto, Kyosuke
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2022-05-03
- Volume
- 22
- Issue
- 9
- Pages
- 3486
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC9102347
- OpenAlex
- W4225423390
- Cited by
- 8
- References
- 26
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 1 · 2023: 4 · 2022: 1
- FWCI
- 0.79
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- JSPS KAKENHI (JP19H02220, JP22J10994)
- Shoreki Commemorative Foundation (JP19H02220, JP22J10994)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Physical Sciences › Engineering › Civil and Structural Engineering › Transport Systems and Technology
- Keywords
- bridge health monitoring, drive-by monitoring, vehicle vibration, bridge joints, convolutional LSTM, bridge maintenance
- MeSH terms
- Automobile Driving, Humans, Vibration, Memory, Long-Term
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Application of C-LSTM Networks to Automatic Labeling of Vehicle Dynamic Response Data for Bridges. https://app.cochat.ai/papers/10.3390/s22093486
- The paper
- Shin, R., Okada, Y., & Yamamoto, K. (2022). Application of C-LSTM Networks to Automatic Labeling of Vehicle Dynamic Response Data for Bridges. Sensors. https://doi.org/10.3390/s22093486
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.