CoChat

Production of Acoustic Insulating Materials from Viscoelastic Mattress Waste

Open access

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Abstract

In this work, briquettes from mattress waste are manufactured and the acoustic properties of the materials produced are checked. Briquettes are made at temperatures between 170 and 185 °C using waste from viscoelastic memory foam (VMF) and applying pressures between 25 and 75 MPa. Later, the properties of the materials such as their bulk density, porosity, and compaction factor are measured. Afterwards, the materials are subjected to a test to determine the sound reduction index at different frequencies. This is completed with a home-made system in which the acoustic signal is compared in the presence and absence of the mattress briquettes using MATLAB® software (Mathworks, Natick, MA, USA) for signal computing. The results are also compared with a reference acoustic insulation material. The runs show that the materials produced from mattress waste are able to reduce the intensity of sound in a similar way to commercial materials. In fact, reduction indices with prepared briquettes are much higher in the frequencies that most affect the human ear, compared to a reference insulating material.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/sci4040048

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Micrographs of the blue ( a ) and grey ( b ) foams. Figure 1. Micrographs of the blue ( a ) and grey ( b ) foams.
Figure 1 Micrographs of the blue ( a ) and grey ( b ) foams. Figure 1. Micrographs of the blue ( a ) and grey ( b ) foams.CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Figure 3 Briquetting machine and heating system. Figure 3. Briquetting machine and heating system.
Figure 3 Briquetting machine and heating system. Figure 3. Briquetting machine and heating system.CC-BY · From the PDF
Figure 4 Scheme of the equipment to measure sound. Figure 4. Scheme of the equipment to measure sound. Figure 4. Scheme of the equipment to measure sound.
Figure 4 Scheme of the equipment to measure sound. Figure 4. Scheme of the equipment to measure sound. Figure 4. Scheme of the equipment to measure sound.CC-BY · From the PDF
Figure 5 Diagram of sound intensities. Figure 5. Diagram of sound intensities. Figure 5. Diagram of sound intensities.
Figure 5 Diagram of sound intensities. Figure 5. Diagram of sound intensities. Figure 5. Diagram of sound intensities.CC-BY · From the PDF
Figure 6 Reduction index of blue briquettes (lines) compared to the reference material (crosses). Volume 4.
Figure 6 Reduction index of blue briquettes (lines) compared to the reference material (crosses). Volume 4.CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Image 9
CC-BY · From the PDF
Figure 10 Reduction index of grey briquettes (lines) compared to the reference material (crosses). Volume 5. Figure 10. Reduction index of grey briquettes (lines) compared to the reference material (crosses). Volume 5.
Figure 10 Reduction index of grey briquettes (lines) compared to the reference material (crosses). Volume 5. Figure 10. Reduction index of grey briquettes (lines) compared to the reference material (crosses). Volume 5.CC-BY · From the PDF
Figure 11 Reduction index of grey briquettes (lines) compared to the reference material (crosses). Figure 11. Reduction index of grey briquettes (lines) compared to the reference material (crosses). Volume 6.
Figure 11 Reduction index of grey briquettes (lines) compared to the reference material (crosses). Figure 11. Reduction index of grey briquettes (lines) compared to the reference material (crosses). Volume 6.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 9 references

Research works printed but not linked: 2

  1. Castillejo, D.J.C.P.W.F. Diseño Y Construcción De Un Tubo De Impedancia Basado En La la norma ISO 10534-2:2001 para la Determinación del Coeficiente de Absorción Acústica para Materiales Aislantes. Ph.D. Thesis, Universidad Pontificia Bolivariana, Medellin, Colombia, 2019.
  2. Lorenzana, M.T.L. Propiedades Acústicas de Materiales Obtenidos con Productos Ecológicos; Acustica, Sociedade Portuguesa de Ac5stica: Guimaraes, Portugal, 2004; pp. 1-10.

Cited by

See all 1

Metadata

Authors
Conesa, J. A., & Tomás, E.
Affiliations
University of Alicante (ES)
Corresponding author
Conesa, Juan A.
Venue
Sci
Publisher
MDPI AG
Published
2022-12-09
Volume
4
Issue
4
Pages
48
ISSN
2413-4155 (ISSN-L)
OpenAlex
W4311967893
Cited by
1
References
8
Citations by year
2025: 1
FWCI
0.14
Type
journal article
Language
en
Open access
Locations
  • Sci (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • RUA, Repositorio Institucional de la Universidad de Alicante (Universidad de Alicante) (submittedVersion, cc-by)
Topics
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Municipal Solid Waste Management
  • Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
Keywords
sound insulation, sound reduction index, briquettes, waste recycling, bulk density, porosity, compaction factor, sound absorption

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.