Comparative Life-Cycle Assessment of a High-Rise Mass Timber Building with an Equivalent Reinforced Concrete Alternative Using the Athena Impact Estimator for Buildings
Open accessThe DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
Buildings consume large amounts of materials and energy, making them one of the highest environmental impactors. Quantifying the impact of building materials can be critical to developing an effective greenhouse gas mitigation strategy. Using Athena Impact Estimator for Buildings (IE4B), this paper compares cradle-to-grave life-cycle assessment (LCA) results for a 12-story building constructed from cross-laminated timber (CLT) and a functionally equivalent reinforced concrete (RC) building. Following EN 15978 framework, environmental impacts for stages A1–A5 (product to construction), B2, B4, and B6 (use), C1–C4 (end of life), and D (beyond the building life) were evaluated in detail along resource efficiency. For material resource efficiency, total mass of the CLT building was 33.2% less than the alternative RC building. For modules A to C and not considering operational energy use (B6), LCA results show a 20.6% reduction in embodied carbon achieved for the CLT building, compared to the RC building. For modules A to D and not considering B6, the embodied carbon assessment revealed that for the CLT building, 6.57 × 105 kg CO2 eq was emitted, whereas for the equivalent RC building, 2.16 × 106 kg CO2 eq was emitted, and emissions from CLT building was 70% lower than that from RC building. Additionally, 1.84 × 106 kg of CO2 eq was stored in the wood material used in the CLT building during its lifetime. Building material selection should be considered for the urgent need to reduce global climate change impacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Wood and timber construction products are far more energy and resource-efficient in the extraction and processing of raw materials than conventional fossil materials used in the construction sector.”
From Integrating Regionalized Socioeconomic Considerations onto Life Cycle Assessment for Evaluating Bioeconomy Value Chains: A Case Study on Hybrid Wood–Concrete Ceiling Elements (2021) · cites this paper as [17]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“From the perspective of climate change, the ability of wood to store carbon and the possibility of using wood to replace emission-intensive and non-renewable materials (e.g., aluminum, steel and concrete) is becoming more relevant in terms of the feasibility of these applications [17-21].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zabalza Bribián, I., Valero Capilla, A., & Aranda Usón, A. (2011) · Building and Environment · doi:10.1016/j.buildenv.2010.12.002 · Cited by 1,287
TRACI 2.0: the tool for the reduction and assessment of chemical and other environmental impacts 2.0
Bare, J. (2011) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-010-0338-9 · Cited by 988 · cited 2×
“The IE4B tool used the “Tool for the Reduction and Assess ent of Chemical and other environmental Impacts” (TRACI) environmental impact assessment method to aggregate the impacts from the LCI flows [31].”
MethodZabalza Bribián, I., Aranda Usón, A., & Scarpellini, S. (2009) · Building and Environment · doi:10.1016/j.buildenv.2009.05.001 · Cited by 691
Meta-analysis of greenhouse gas displacement factors of wood product substitution
Sathre, R., & O’Connor, J. (2010) · Environmental Science & Policy · doi:10.1016/j.envsci.2009.12.005 · Cited by 537 · cited 1×
“In addition, using the mass of wood building materials and the carbon displacement factor [32,33] to estimate avoided product emissions, results showed that the MT building saved 3.”
MethodRobertson, A. B., Lam, F. C. F., & Cole, R. J. (2012) · Buildings · doi:10.3390/buildings2030245 · Cited by 238
Skullestad, J. L., Bohne, R. A., & Lohne, J. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.09.112 · Cited by 213 · cited 1×
“Skullestad [26] followed the ISO standard provided framework and calculated the climate change impact (CC) with the ReCiPe method using SimaPro v7 software equipped with Ecoinvent v3.”
MethodPierobon, F., Huang, M., Simonen, K., & Ganguly, I. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100862 · Cited by 168
Sandanayake, M. S., Lokuge, W. P., Zhang, G., Setunge, S., & Tushar, Q. (2017) · Sustainable Cities and Society · doi:10.1016/j.scs.2017.12.017 · Cited by 160 · cited 1×
“The building sector is one of the major industries producing a large amount of greenhouse gases [1,2].”
BackgroundLife Cycle Assessment of Forest-Based Products: A Review
Sahoo, K., Bergman, R., Alanya-Rosenbaum, S., Gu, H., & Liang, S. (2019) · Sustainability · doi:10.3390/su11174722 · Cited by 102 · cited 1×
“Now wood construction is becoming popular for mid- to high-rise buildings, because of the rapid growth of mass timber (MT) products, such as cross-laminated timber (CLT) [10,11].”
BackgroundSelf-citation
Research works printed but not linked: 4
- 1. Hafner, A. Contribution of timber buildings on sustainability issues. In Proceedings of the World Sustainable Building 2014, Barcelona, Spain, 28-30 October 2014.
- 13. Ritter, M.; Skog, K.; Bergman, R. Science Supporting the Economic and Environmental Benefits of Using Wood and Wood Products in Green Building Construction ; General Technical Report FPL-GTR-206; U.S. Department of Agriculture, Forest Service, Forest Products Laboratory: Madison, WI, USA, 2011; pp. 1-9.
- 15. Bergman, R.; Puettmann, M.; Taylor, A.; Skog, K.E. The Carbon Impacts of Wood Products. Forest Prod. For. Prod. J. 2014 , 64 , 220-231.
- 20. Dagenais, C.; White, R.H.; Sumathipala, K. Fire: Fire Performance of Cross-Laminated Timber Assemblies. In CLT Handbook: Cross-Laminated Timber / Edited by Erol Karacabeyli, Brad Douglas (US Edition) ; U.S. Department of Agriculture, Forest Service, Forest Products Laboratory: Madison, WI, USA; Binational Softwood Lumber Council: Surrey, BC, Canada, 2012; p. 55, Chapter 8; ISBN 978-0-86488-553-1.
Cited by
Items 101–125 of 125
Alam, A., Goto, Y., Hagy, S., Tuomasjukka, D., & Hughes, M. (2022) · Journal of Sustainability Research · doi:10.20900/jsr20220014 · Cited by 6
“Whilst there has been much emphasis on research into wood buildings and life cycle assessment (LCA) during the last decade, the major focus has been on environmental aspects (e.g., [15,16]), with several comparative assessments of wood and concrete buildings having been conducted [3,17].”
BackgroundRecent Developments in Timber Design & Its Impact on Carbon Emissions
Jackson, R. (2023) · Spectra Undergraduate Research Journal · doi:10.9741/2766-7227.1026 · Cited by 1
Climate benefits of wooden construction in urban context
Talvitie, I., Amiri, A., & Junnila, S. (2022) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1101/2/022048 · Cited by 4
Tenório, M., Branco, J. M., & Silva, S. M. (2023) · Springer eBooks · doi:10.1007/978-3-031-25795-7_13 · Cited by 1
Gu, H., Liang, S., Ricco, M. L., & Bergman, R. D. (2024) · doi:10.2737/fpl-rp-719 · Cited by 1
Self-citationCaldas, L. R., Sierra-Pérez, J., Filho, R. D. T., & Silvoso, M. M. (2022) · Construction technologies and architecture · doi:10.4028/www.scientific.net/cta.1.635
“During the last years, new studies started to appear with the use of LCA for the evaluation of the environmental performance of CLT (Chen et al., 2019, 2020; Liang et al., 2020; Nakano et al., 2020; Puettmann et al., 2019).”
BackgroundTenório, M., Silva, S. M., & Branco, J. M. (2023) · World Conference on Timber Engineering (WCTE) · doi:10.52202/069179-0259
Corti, L., Nunzio, G. D., & Muciaccia, G. (2023) · Lecture notes in civil engineering · doi:10.1007/978-3-031-34159-5_24
Energy efficiency and sustainability in composites industry
Sapuan, S. M., Ilyas, R. A., Nugroho, A., & Rajeshkumar, L. (2025) · Physical Sciences Reviews · doi:10.1515/psr-2024-0031
Talvitie, I., Kinnunen, A., Amiri, A., & Junnila, S. (2025) · CIB Conferences · doi:10.7771/3067-4883.1844 · Cited by 1
Vanderhaeghe, L., Albiol-Ibáñez, J. R., Li, J., Vitse, J., Bonet, J. L., Wang, J., Xue, F., Song, Y., Fu, I. C. S., Lau, S. S. Y., et al. (2025) · Springer eBooks · doi:10.1007/978-981-96-6739-0_1
A Study on the Timber Building Developments at the Urban Renewal
Kobayashi, Y., & Muraki, M. (2025) · Journal of the City Planning Institute of Japan · doi:10.11361/journalcpij.60.564
21113 Energy efficiency and sustainability in composites industry
Sapuan, S. M., Ilyas, R. A., Nugroho, A., & Rajeshkumar, L. (2025) · De Gruyter eBooks · doi:10.1515/9783111234762-013
A higher-order solid finite element for multi-layered timber structures
Paroissien, J., Lardeur, P., & Oudjène, M. (2026) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2026.111236
Landscape of Cross-Laminated Timber in the United States
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Atnoorkar, S., Masri, Y. E., Goetsch, H., & Harris, C. (2025) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/2583485 · Cited by 1
Khairnar, P., & Alzoubi, B. T. (2026) · International Journal of Architectural Engineering Technology · doi:10.15377/2409-9821.2026.13.3
Porras, E., Morales, W., Chang, L., & Callata, J. S. (2026) · Sustainability · doi:10.3390/su18084096
Suárez-Riestra, F., Gutiérrez, E. M., Otero-Chans, D., & Vázquez-Rodríguez, P. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.116363
Dinh, T. H., & Dinh, T. H. (2026) · Recent Progress in Science and Engineering · doi:10.21926/rpse.2602010
Guan, X., Xia, B., Xiao, J., & Sun, X. (2026) · Energy and Buildings · doi:10.1016/j.enbuild.2026.117850
Evaluating the Environmental Impact of Transporting Cross-Laminated Timber to the UAE
Pilathottathil, S. N., & Rauf, A. (2026) · Advances in Science, Technology & Innovation/Advances in science, technology & innovation · doi:10.1007/978-3-032-25471-9_5
Aman, M. I., Hossain, M. U., Crovella, P. L., & Therasme, O. (2026) · Smart and Sustainable Built Environment · doi:10.1108/sasbe-11-2025-0723 · Cited by 1
69Chapter 5 Carbon-negative bioproductsbioproducts
Arango, C. G., Valderrama, C., Ali, J., & Vasco‐Correa, J. (2026) · De Gruyter eBooks · doi:10.1515/9783112212141-005
Metadata
- Authors
- Chen, Z., Gu, H., Bergman, R., & Liang, S.
- Affiliations
- Beijing Forestry University (CN)
- United States Department of Agriculture (US)
- Corresponding author
- Gu, Hongmei
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2020-06-09
- Volume
- 12
- Issue
- 11
- Pages
- 4708
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3034300241
- Cited by
- 123
- References
- 22
- Citations by year
- 2026: 11 · 2025: 28 · 2024: 25 · 2023: 23 · 2022: 18 · 2021: 16 · 2020: 2
- FWCI
- 5.30
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- a joint venture agreement between the USDA Forest Service Forest Products Laboratory and the U.S. Endowment for Forestry & Communities, Inc., Endowment Green Building Partnership – Phase 1 (16-JV-11111137-094)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Engineering › Building and Construction › Sustainable Building Design and Assessment
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Keywords
- cross-laminated timber, reinforced concrete, high-rise buildings, embodied carbon, life cycle assessment, cradle-to-grave life cycle assessment, material efficiency, building materials selection, greenhouse gas emissions reduction, EN 15978
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.