The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Current Sustainable Trends of Using Waste Materials in Concrete—A Decade Review
Open accessAbstract
Concrete is the most used construction material in the world. Consequently, the mass extraction of virgin materials required for concrete production causes major environmental impacts. With a focus on promoting sustainability, numerous research studies on incorporating waste materials to replace virgin substances in concrete were undertaken. Despite this vast volume of published literature, systematic research studies on these sustainable concrete mixes that inform various stakeholders on current research trends, future research directions, and marketability options products are seldom conducted. This paper presents a decade review on sustainable concrete with a focus on virgin materials being replaced with waste materials. It aims to inform researchers of current research trends and gaps in the research area of waste material use in concrete. The review also identifies key parameters that restrict the marketability of these sustainable concrete products. The three-step research methodology involves a bibliometric assessment, a key review of selected waste materials, and an interview with a panel of experts focusing on impediments towards the transition of sustainable concrete products into the industry market. Bibliometric assessment was based on 1465 research publications in which five key materials (plastic, glass, fly ash, slag) and construction and demolition waste were selected for the review. The interview was conducted with ten industry experts to discuss the industry limitations in the commercial establishment of materials. The review of existing knowledge and the findings on sustainable concrete presented in this paper provide directions for both research academics and industry stakeholders to systematically focus on sustainable concrete products that are market-ready.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
bibliometrix: An R-tool for comprehensive science mapping analysis
Aria, M., & Cuccurullo, C. (2017) · Journal of Informetrics · doi:10.1016/j.joi.2017.08.007 · Cited by 16,064
Akhtar, A., & Sarmah, A. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.085 · Cited by 1,250
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Steel slag in China: Treatment, recycling, and management
Guo, J., Bao, Y., & Wang, M. (2018) · Waste Management · doi:10.1016/j.wasman.2018.04.045 · Cited by 961 · cited 1×
“There are approximately 20 million tons of slag produced annually in the United States and Europe, with an estimation of 288 million tons worldwide [161].”
BackgroundGreen house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Use of plastic waste as aggregate in cement mortar and concrete preparation: A review
Saikia, N., & de Brito, J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.066 · Cited by 709 · cited 1×
“The majority of these studies incorporated plastic as an aggregate substitute (plastic aggregates, PAs) or as fiber reinforcement (plastic fibers, PFs), and many review papers were published on this subject [41–46].”
BackgroundPerformance of structural concrete with recycled plastic waste as a partial replacement for sand
Thorneycroft, J., Orr, J., Savoikar, P., & Ball, R. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.127 · Cited by 305
Exploiting recycled plastic waste as an alternative binder for paving blocks production
Agyeman, S., Obeng-Ahenkora, N. K., Assiamah, S., & Twumasi, G. (2019) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2019.e00246 · Cited by 161 · cited 1×
“Despite the potential to significantly reduce the embodied energy of concrete and mortar, this review identified only six research outputs on the subject published since 2009 [49–54].”
BackgroundComparative LCA of wood waste management strategies generated from building construction activities
Hossain, M. U., & Poon, C. S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.233 · Cited by 142
Metadata
- Authors
- Sandanayake, M., Bouras, Y., Haigh, R., & Vrcelj, Z.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2020-11-18
- Volume
- 12
- Issue
- 22
- Pages
- 9622
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3099728781
- Cited by
- 208
- References
- 9
- FWCI
- 9.50
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.