The DOI matches its Crossref record; 214 of the 214 references it cites were found in a registry or an index.
Plastic Waste Recycling, Applications, and Future Prospects for a Sustainable Environment
Open accessAbstract
Plastic waste accumulation has been recognized as one of the most critical challenges of modern societies worldwide. Traditional waste management practices include open burning, landfilling, and incineration, resulting in greenhouse gas emissions and economic loss. In contrast, emerging techniques for plastic waste management include microwave-assisted conversion, plasma-assisted conversion, supercritical water conversion, and photo reforming to obtain high-value products. Problems with poorly managed plastic waste are particularly serious in developing countries. This review article examines the emerging strategies and production of various high-value-added products from plastic waste. Additionally, the uses of plastic waste in different sectors, such as construction, fuel production, wastewater treatment, electrode materials, carbonaceous nanomaterials, and other high-value-added products are reviewed. It has been observed that there is a pressing need to utilize plastic waste for a circular economy and recycling for different value-added products. More specifically, there is limited knowledge on emerging plastic waste conversion mechanisms and efficiency. Therefore, this review will help to highlight the negative environmental impacts of plastic waste accumulation and the importance of modern techniques for waste management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“This trend helps address environmental concerns by reducing plastic waste, minimizing the use of natural aggregates, and lowering carbon emissions from conventional material production and transportation [91].”
From Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction (2025) · cites this paper as [91]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–214 of 214
Qin, Y., Qiao, Y., Yin, X., Zhou, Y., Xu, J. Y., Wang, L., Wang, H., & Chen, Z. (2019) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-019-00088-6 · Cited by 13
Effects of Adding Waste Plastics on Some Properties of High Performance Concrete
Al‐Hadithi, A. I., & Al-Ani, M. F. (2018) · International Conference on Developments in eSystems Engineering (DeSE) · doi:10.1109/dese.2018.00055 · Cited by 12
Pandi, N., Sonawane, S. H., Gumfekar, S. P., Kola, A. K., Borse, P. H., Ambade, S. B., Guptha, S., & Ashokkumar, M. (2019) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2019.07609 · Cited by 12
Study on The Effects of Plastic as Admixture on The Mechanical Properties of Cement-Sand Bricks
Fai, C. M., & Rosidan, M. A. K. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/713/1/012016 · Cited by 12
Impact on concrete properties using e-plastic waste fine aggregates and silica fume
Farooq, A., Malik, M. A., Tariq, T., Riaz, M., Haroon, W., Malik, A., & Rehman, M. U. (2019) · Gospodarka Surowcami Mineralnymi - Mineral Resources Management · doi:10.24425/gsm.2019.128516 · Cited by 12
The influence of the usage of Idpe plastic waste as fine aggregate in light concrete bricks
Nursyamsi, N., Indrawan, I., & Ramadhan, P. (2019) · MATEC Web of Conferences · doi:10.1051/matecconf/201925801006 · Cited by 11
González-Montijo, M. A., Soto-Toro, H. L., Rivera-Pérez, C., Esteves-Klomsingh, S., & Suárez, O. M. (2019) · Journal of the Mechanical Behavior of Materials · doi:10.1515/jmbm-2019-0010 · Cited by 9
Feasibility Study on Usage of Metalized Plastic Waste in Concrete
Bhogayata, A., & Arora, N. K. (2017) · Sustainable civil infrastructures · doi:10.1007/978-3-319-61612-4_27 · Cited by 8
Srinivasan, K., Premalatha, J., & Srigeethaa, S. (2018) · Archives of Civil Engineering · doi:10.2478/ace-2018-0028 · Cited by 8
Recent Trends to Address Plastic Waste at the Global Level
Rodríguez, L. V. C., & Fernández, C. (2022) · Springer eBooks · doi:10.1007/978-981-16-5403-9_5 · Cited by 5
Effect of Plastic Waste as Partial Replacement of Fine Aggregate in Concrete and Cost Analysis
Lasiyal, N., Pawar, L. G. S., & Dixit, M. (2018) · Cited by 4
A Paper on Experimental Investigation on Concrete Paver Block and Plastic Paver Block
Arsod, M. N. D. (2019) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2019.3397 · Cited by 4
Use Of Plastic As A Partial Replacement Of Coarse Aggregate In Concrete For Brick Classifications
Mahzuz, H. M. A., & Tahsin, A. (2019) · International journal of scientific and technology research · Cited by 4
Effect of Plastic Synthetic Aggregate in the Production of Lightweight Concrete
Mbadike, E. M., & G.C., E. (2014) · JOURNAL OF ADVANCES IN BIOTECHNOLOGY · doi:10.24297/jbt.v2i1.5051 · Cited by 2
Research works printed but not linked: 11
- Watts, 2019, Concrete: The most destructive material on Earth, Guardian, 25, 1
- Guptaa, 2018, To Study the feasibility of Coarse and Fine plastic Aggregates in Concrete, Int. J. Appl. Eng. Res., 13, 5815
- Panimayam, 2017, Utilisation of waste plastics as a replacement of coarse aggregate in paver blocks, Int. J. ChemTech Res., 10, 211
- Habib, 2017, Concrete production using recycled waste plastic as aggregate, J. Civ. Eng. IEB, 45, 11
- Kothai, 2014, Utilization of steel slag in concrete as a partial replacement material for fine aggregates, Int. J. Innov. Res. Sci. Eng. Technol., 3, 11585
- Bhushaiah, 2019, Study of plastic bricks Made from waste Plastic, Int. Res. J. Eng. Technol., 6, 6
- Yaseen, 2018, Strength Characteristics Of Ecofriendly Cement Bricks Using Solid Waste Composites, IJSART, 4, 1536
- Prasanth, 2018, Utilization of waste plastics in fly ash bricks, Int. J. Pure Appl. Math., 119, 1417
- Alan, 2015, A Study on Mechanical Properties of fly ash Brick with Waste Plastic Strips, Int. J. Appl. Eng. Res., 10, 183
- Nivetha, 2006, Production of plastic paver block from the solid waste (Quarry dust, fly ash &PET), ARPN J. Eng. Appl. Sci., 11, 1819
- Jatoi, A.S., Mazari, S., Baloch, H.A., and Riaz, S. (2016, January 1–3). 256. Study to investigate the optimize blending ratio of cow dung manure with distillery waste water for power generation in microbial fuel cell. Proceedings of the 4th International Conference on Energy, Environment and Sustainable Development, Jamshoro, Pakistan.
Cited by
Sorted by citations
Dananjaya, V., Chevali, V. S., Dear, J. P., Potluri, P., & Abeykoon, C. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101336 · Cited by 144
Li, W., Zhao, W., Zhu, H., Li, Z., & Wang, W. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta09523h · Cited by 113
Macheca, A. D., Mutuma, B. K., Adalima, J. L., Midheme, E., Lucas, L. H. M., Ochanda, V. K., & Mhlanga, S. D. (2024) · Recycling · doi:10.3390/recycling9050077 · Cited by 131
Dalbanjan, N. P., Eelager, M. P., Korgaonkar, K., Gonal, B. N., Kadapure, A. J., Arakera, S. B., & Kumar, S. K. P. (2024) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2024.101265 · Cited by 114
Enache, A.-C., Grecu, I., & Samoilă, P. (2024) · Materials · doi:10.3390/ma17122991 · Cited by 84
Metadata
- Authors
- Maitlo, G., Ali, I., Maitlo, H. A., Ali, S., Unar, I. N., Ahmad, M. B., Bhutto, D. K., Karmani, R. K., Naich, S. U. R., Sajjad, R. U., Ali, S., & Afridi, M. N.
- Affiliations
- Dawood University of Engineering and Technology (PK)
- Sindh Madressatul Islam University (PK)
- Nankai University (CN)
- Iqra University (PK)
- Mehran University of Engineering and Technology (PK)
- Xi'an Jiaotong University (CN)
- Hazara University (PK)
- Hanyang University (KR)
- Corresponding author
- Maitlo, Ghulamullah
- Ali, Imran
- ORCID
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2022-09-16
- Volume
- 14
- Issue
- 18
- Pages
- 11637
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W4296455977
- Cited by
- 143
- References
- 214
- Citations by year
- 2026: 34 · 2025: 47 · 2024: 45 · 2023: 17
- FWCI
- 6.46
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- University of Engineering and Technology, Lahore
- Topics
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
- Keywords
- plastic recycling, plastic waste management, high-value-added products, circular economy, wastewater treatment, electrode materials, carbon nanomaterials, greenhouse gas emissions, developing countries
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
