The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Adsorptive Removal of Reactive Black 5 from Wastewater Using Bentonite Clay: Isotherms, Kinetics and Thermodynamics
Open accessAbstract
The studies of the kinetics and isotherms adsorption of the Reactive Black 5 (RB5) onto bentonite clay were explored in a batch study in a laboratory. The maximum RB5 adsorption conditions of bentonite clay were optimized such as shaking speed (100 rpm), temperature (323 K), pH (10), contact time (40 min), initial dye concentration (170 mg·L−1), and particle size (177 µm). The adsorbent surface was characterized using Fourier Transform Infrared Spectroscopy spectroscopy. The mechanisms and characteristic parameters of the adsorption process were analyzed using two parameter isotherm models which revealed the following order (based on the coefficient of determination): Harkin-Jura (0.9989) > Freundlich (0.9986) and Halsey (0.9986) > Langmuir (0.9915) > Temkin (0.9818) > Dubinin–Radushkevich (0.9678). This result suggests the heterogeneous nature of bentonite clay. Moreover, the adsorption process was chemisorption in nature because it follows the pseudo-second order reaction model with R2 value of 0.9998, 0.9933 and 0.9891 at 25, 75 and 100 mg·L−1 RB5 dye in the solution, respectively. Moreover, based on the values of standard enthalpy, Gibbs free energy change, and entropy, bentonite clay showed dual nature of exothermic and endothermic, spontaneous and non-spontaneous as well as increased and decreased randomness at solid–liquid interface at 303–313 K and 313–323 K temperature, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Srivastava, V. C., Mall, I. D., & Mishra, I. M. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.11.052 · Cited by 568
Cited by
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957
Hassan, M. M., & Carr, C. M. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.06.043 · Cited by 816
Recent advancements in bioremediation of dye: Current status and challenges
Vikrant, K., Giri, B. S., Raza, N., Roy, K., Kim, K.-H., Rai, B. N., & Singh, R. S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.01.029 · Cited by 601
Regeneration performance of clay-based adsorbents for the removal of industrial dyes: a review
Momina, M., Shahadat, M., & Isamil, S. (2018) · RSC Advances · doi:10.1039/c8ra04290j · Cited by 409
Textile Industry Effluent Treatment Techniques
Adane, T., Adugna, A. T., & Alemayehu, E. (2021) · Journal of Chemistry · doi:10.1155/2021/5314404 · Cited by 265
Metadata
- Authors
- Amin, M., Alazba, A., & Shafiq, M.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2015-11-18
- Volume
- 7
- Issue
- 11
- Pages
- 15302-15318
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2178755947
- Cited by
- 199
- References
- 2
- FWCI
- 5.25
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorptive Removal of Reactive Black 5 from Wastewater Using Bentonite Clay: Isotherms, Kinetics and Thermodynamics. https://app.cochat.ai/papers/10.3390/su71115302
- The paper
- Amin, M., Alazba, A., & Shafiq, M. (2015). Adsorptive Removal of Reactive Black 5 from Wastewater Using Bentonite Clay: Isotherms, Kinetics and Thermodynamics. Sustainability. https://doi.org/10.3390/su71115302
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.