A Digital Twin-Based Approach for the Fault Diagnosis and Health Monitoring of a Complex Satellite System
Open accessThe DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
The ever-increasing functional density and complexity of the satellite systems, the harsh space flight environment, as well as the cost reduction measures that require less operator involvement are increasingly driving the need to develop new approaches for fault diagnosis and health monitoring (FD-HM). The data-driven FD-HM approaches use signal processing or data mining to obtain implicit information for the operating state of the system, which is good at monitoring systems extensively and shallowly and is expected to reduce the workload of the operators. However, these approaches for the FD-HM of the satellite system are driven primarily by the historical data and some static physical data, with little consideration for the simulation data, real-time data, and data fusion between the two, so it is not fully competent for the real-time monitoring and maintenance of the satellite in orbit. To ensure the reliable operation of the complex satellite systems, this paper presents a new physical–virtual convergence approach, digital twin, for FD-HM. Moreover, we present an FD-HM application of the satellite power system to demonstrate the effectiveness of the proposed approach.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures












Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“According to [173,174], the Digital Twin model can map various characteristics of the physical machine into the virtual world to produce a digital replica of the machine that is transferable, detachable, modifiable, reproducible, repeatable, and erasable.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [174]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1988) · Cited by 16,582
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871 · cited 1×
“Finally, we hope to incorporate more mature machine learning algorithms [46] into the proposed digital twin framework and extend the method to other satellite systems.”
MethodA Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113 · cited 1×
“On the other hand, data-driven methods cannot explain the results, that is, they cannot identify the root cause.”
MethodCyber Physical Systems: Design Challenges
Lee, E. A. (2008) · 2008 11th IEEE International Symposium on Object and Component-Oriented Real-Time Distributed Computing (ISORC) · doi:10.1109/isorc.2008.25 · Cited by 3,525 · cited 1×
“Currently, in the context of the cyber-physical system (CPS), it is essential to focus on the virtual world and achieve the deep integration and real-time interaction between the physical world and the virtual world, to improve the FD-HM for complex systems [16,17].”
BackgroundThe Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 3,395 · cited 1×
“use digital twins as a new paradigm for the vehicle’s on-board integrated vehicle health management system (IVHMS) to achieve flight safety and reliability [24].”
MethodDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Support vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474
(1988) · doi:10.1016/b978-0-08-051489-5.50008-4 · Cited by 1,429
Fault Detection and Diagnosis in Industrial Systems
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2001) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0347-9 · Cited by 1,318
Digital twin-driven product design framework
Tao, F., Sui, F., Liu, A., Qi, Q., Zhang, M., Song, B., Guo, Z., Lu, S. C.-Y., & Nee, A. Y. C. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1443229 · Cited by 1,187
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
C2PS: A Digital Twin Architecture Reference Model for the Cloud-Based Cyber-Physical Systems
Alam, K. M., & El Saddik, A. (2017) · IEEE Access · doi:10.1109/access.2017.2657006 · Cited by 741 · cited 1×
“This section describes these key enabling technologies.”
Digital Twin for rotating machinery fault diagnosis in smart manufacturing
Wang, J., Ye, L., Gao, R. X., Li, C., & Zhang, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1552032 · Cited by 552
Digital Twin Data Modeling with AutomationML and a Communication Methodology for Data Exchange
Schroeder, G. N., Steinmetz, C., Pereira, C. E., & Espindola, D. B. (2016) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2016.11.115 · Cited by 492 · cited 1×
“Global parameters, which include the telemetry number, data type, and physical unit of the system-level parameter and the corresponding model parameter names.”
BackgroundPrinciples of Object Oriented Modeling and Simulation with Modelica 3.3: A Cyber‐Physical Approach
Fritzson, P. (2014) · Wiley eBooks · doi:10.1002/9781118989166 · Cited by 479 · cited 11×
“R � � Therein R L the e ff ect of temperature on battery performance is reflected in the relationship between resistance and capacitance with temperature. the effect of temperature on battery performance is reflected in the relationship between resistance and capacitance with temperature In the design phase, domain expe…”
MethodInfluentialA Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C., Sanders, S. R., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 462
Reliability Engineering and Risk Analysis: A Practical Guide
Modarres, M., Kaminskiy, M. P., & Krivtsov, V. (2016) · CRC Press eBooks · doi:10.1201/9781315382425 · Cited by 457
Physical system modeling with Modelica
Mattsson, S. E., Elmqvist, H., & Otter, M. (1998) · Control Engineering Practice · doi:10.1016/s0967-0661(98)00047-1 · Cited by 420
Dynamic Bayesian Network for Aircraft Wing Health Monitoring Digital Twin
Li, C., Mahadevan, S., Ling, Y., Choze, S., & Wang, L. (2017) · AIAA Journal · doi:10.2514/1.j055201 · Cited by 381
Diagnostic methods I: sensitivity, specificity, and other measures of accuracy
van Stralen, K. J., Stel, V. S., Reitsma, J. B., Dekker, F. W., Zoccali, C., & Jager, K. J. (2009) · Kidney International · doi:10.1038/ki.2009.92 · Cited by 264 · cited 1×
“Referring to the performance evaluation pattern of disease diagnosis [44], we focus on the three concepts of accuracy (ACC), specificity (SPE), and sensitivity (SEN) in the context of the selected fault”
BackgroundNew clustering algorithm-based fault diagnosis using compensation distance evaluation technique
Lei, Y., He, Z., Zi, Y., & Chen, X. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.07.013 · Cited by 244
Reliability of Safety‐Critical Systems: Theory and Applications
Rausand, M. (2014) · Wiley eBooks · doi:10.1002/9781118776353 · Cited by 187
A decision tree based data-driven diagnostic strategy for air handling units
Yan, R., Ma, Z., Zhao, Y., & Kokogiannakis, G. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.039 · Cited by 180 · cited 1×
“The corresponding relationship between the ten typical failure modes and feature parameters is obtained, as shown in Table 3.”
BackgroundLocal and global principal component analysis for process monitoring
Yu, J. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.06.008 · Cited by 163 · cited 4×
“To date, various data-driven methods, including clustering [5], Neural Networks [6], Bayesian Networks [7], Support Vector Machine (SVM) [8], and Principal Components Analysis (PCA) [9], have been employed to get implicit information for the satellite systems.”
MethodInfluentialInductive System Health Monitoring
Iverson, D. L. (2004) · NASA Technical Reports Server (NASA) · Cited by 153
On Clustering Time Series Using Euclidean Distance and Pearson CorrelationPreprint
Berthold, M. R., & Höppner, F. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1601.02213 · Cited by 132 · cited 1×
“Then, in the light of the simulation data as a reference, fault identification algorithms, such as a decision tree, are utilized to determine the fault components and the cause of failure.”
MethodHehenberger, P., & Bradley, D. (2016) · Springer eBooks · doi:10.1007/978-3-319-32156-1 · Cited by 112
Ghosh, K., Ng, Y. S., & Srinivasan, R. (2010) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2010.05.004 · Cited by 77
Complex-bilinear recurrent neural network for equalization of a digital satellite channel
Park, D.-C., & Jeong, T.-K. J. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2002.1000135 · Cited by 76
A Three-Stage method for Data Text Mining: Using UGC in Business Intelligence Analysis
Saura, J. R., & Bennett, D. R. (2019) · Symmetry · doi:10.3390/sym11040519 · Cited by 75 · cited 1×
“In this paper, we present a digital twin-driven FD-HM approach for satellite systems.”
MethodData-driven fault diagnosis of satellite power system using fuzzy Bayes risk and SVM
Suo, M., Zhu, B., An, R., Sun, H., Xu, S., & Yu, Z. (2018) · Aerospace Science and Technology · doi:10.1016/j.ast.2018.11.049 · Cited by 72 · cited 4×
“Pan et al. propose a data-driven anomaly detection method based on Kernel Principal Component Analysis (KPCA) and association rule mining to more e ff ectively identify satellite power system faults [13].”
MethodInfluentialModeling and online parameter identification of Li-Polymer battery cells for SOC estimation
Rahimi-Eichi, H., Baronti, F., & Chow, M.-Y. (2012) · 2012 IEEE International Symposium on Industrial Electronics · doi:10.1109/isie.2012.6237284 · Cited by 65 · cited 1×
“The equivalent circuit shown in Figure 10a is used to model the battery characteristics [39,40].”
MethodPerformance Evaluation of Cyber-Physical Intrusion Detection on a Robotic Vehicle
Vuong, T. P., Loukas, G., & Gan, D. (2015) · 2015 IEEE International Conference on Computer and Information Technology; Ubiquitous Computing and Communications; Dependable, Autonomic and Secure Computing; Pervasive Intelligence and Computing · doi:10.1109/cit/iucc/dasc/picom.2015.313 · Cited by 57 · cited 2×
“scenario of physical entities and virtual models [41,42].”
BackgroundMethodDesign and Management of Satellite Power Systems
Lee, J., Kim, E., & Shin, K. G. (2013) · 2013 IEEE 34th Real-Time Systems Symposium · doi:10.1109/rtss.2013.18 · Cited by 56 · cited 1×
“The satellite power system converts the acquired solar energy into usable electrical energy for the payload and support platform, and its performance directly affects the operating state of the satellite [36].”
BackgroundThe effects of layering and encapsulation on software development cost and quality
Zweben, S. H., Edwards, S. H., Weide, B. W., & Hollingsworth, J. E. (1995) · IEEE Transactions on Software Engineering · doi:10.1109/32.372147 · Cited by 54 · cited 2×
“satellite systems, th modeling process follows the principle of layering and encapsulation to reduce the difficulty of model implementation and integration [31].”
BackgroundA Hierarchical Digital Twin Model Framework for Dynamic Cyber-Physical System Design
Shangguan, D., Chen, L., & Ding, J. (2019) · Proceedings of the 5th International Conference on Mechatronics and Robotics Engineering · doi:10.1145/3314493.3314504 · Cited by 43 · cited 1×
“In this way, each component node of the satellite system can find its corresponding twin thing in the multi-domain integrated model [32].”
BackgroundSelf-citationPan, D., Liu, D., Zhou, J., & Zhang, G. (2015) · Microelectronics Reliability · doi:10.1016/j.microrel.2015.07.010 · Cited by 40 · cited 1×
“Li et al. use the dynamic Bayesian network to construct a digital twin model to implement the diagnosis and prognosis of the operating state of the aircraft wing [25].”
MethodA Modelica Library for Simulation of Elecric Energy Storages
Einhorn, M., Conte, F. V., Kral, C., Niklas, C., Popp, H., & Fleig, J. (2011) · Linköping electronic conference proceedings · doi:10.3384/ecp11063436 · Cited by 33 · cited 1×
“The equivalent circuit shown in Figure 10a is used to model the battery characteristics [39,40].”
MethodCollocation Methods for Optimization in a Modelica Environment
Magnusson, F., & Åkesson, J. (2012) · Linköping electronic conference proceedings · doi:10.3384/ecp12076649 · Cited by 30 · cited 1×
“Dependent on model verification, the output response of the simulation model is compared with the historical data and experimental data of the real physical system, and the optimal model parameters are obtained by least squares or optimization methods [33].”
MethodJoshi, A., Gavriloiu, V., Barua, A., Garabedian, A., Sinha, P., & Khorasani, K. (2007) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/icsmc.2007.4414081 · Cited by 27 · cited 1×
“Due to the scale of telemetry data, previous approaches relying on operators to detect and correct anomalies are slow and error prone because they cannot accommodate the rapid growth of the systems [3,4].”
Sensor System and Health Monitoring
Xu, J., & Xu, L. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-812207-5.00002-x · Cited by 13
Shangguan, D., Chen, L., Ding, J., & Liu, Y. (2019) · Linköping electronic conference proceedings · doi:10.3384/ecp19157463 · Cited by 6 · cited 4×
“To solve the problems mentioned above, a digital twin-based space-ground power management (SGPM) platform is developed (see Figure 7) The proposed platform, with the multi-domain unified modeling and simulation software MWorks [37,38] as the underlying layer, integrates the multi-domain unified system model, fault diagn…”
MethodInfluentialSelf-citation
Research works printed but not linked: 3
- Fan, C., Jin, Z., Zhang, J., and Tian, W. (2002, January 2–5). Application of multisensory data fusion based on RBF neural networks for fault diagnosis of SAMS. Proceedings of the ICARCV, Singapore.
- Fritzson, P., and Bunus, P. (2002, January 14–18). Modelica—A general object-oriented language for continuous and discrete-event system modelling and simulation. Proceedings of the 35th Annual Simulation Symposium, San Deigo, CA, USA.
- Zhou, F., Chen, L., Wu, Y., Ding, J., Zhao, J., and Zhang, Y.-Q. (2006, January 4–5). MWorks: A Modern IDE for Modeling and Simulation of Multidomain Physical Systems Based on Modelica. Proceedings of the 5th International MODELICA Conference, Vienna, Austria.
Cited by
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“According to [173, 174], the Digital Twin model can map various characteristics of the physical machine into the virtual world to produce a digital replica of the machine that is transferable, detachable, modifiable, reproducible, repeatable, and erasable.”
MethodThe advance of digital twin for predictive maintenance: The role and function of machine learning
Chen, C., Fu, H., Zheng, Y., Tao, F., & Liu, Y. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.10.010 · Cited by 193
“To address this challenge, the American National Institute of Standards and related research are designing ISO 23247 to help standardize DT frameworks [69,87].”
MethodDigital twin aided adversarial transfer learning method for domain adaptation fault diagnosis
Wang, J., Zhang, Z., Liu, Z., Han, B., Bao, H., & Ji, S. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109152 · Cited by 171
Comprehensive analysis of digital twins in smart cities: a 4200-paper bibliometric study
El-Agamy, R., Sayed, H. A., Akhatatneh, A. M. A., Aljohani, M., & Elhosseini, M. A. (2024) · Artificial Intelligence Review · doi:10.1007/s10462-024-10781-8 · Cited by 183
Digital Twins in Civil Infrastructure Systems
Callcut, M., Cerceau Agliozzo, J.-P., Varga, L., & McMillan, L. (2021) · Sustainability · doi:10.3390/su132011549 · Cited by 132
“Additional work has also touched on some limitations of conventional data-driven methods, discussing how they rely on the physical asset and its historical or online data with little connection to its virtual model [71].”
BackgroundMethod
Metadata
- Authors
- Shangguan, D., Chen, L., & Ding, J.
- Affiliations
- Huazhong University of Science and Technology (CN)
- Corresponding author
- Shangguan, Duansen
- Venue
- Symmetry
- Publisher
- MDPI AG
- Published
- 2020-08-05
- Volume
- 12
- Issue
- 8
- Pages
- 1307
- ISSN
- 2073-8994 (ISSN-L)
- OpenAlex
- W3047093065
- Cited by
- 94
- References
- 44
- Citations by year
- 2026: 14 · 2025: 21 · 2024: 20 · 2023: 16 · 2022: 13 · 2021: 10
- FWCI
- 4.82
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Symmetry (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Key R&D Program of China (2018YFB1700905)
- National Defense Basic Scientific Research program of China (JCKY2018203A001)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Engineering and Test Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Keywords
- digital twin, fault diagnosis, health monitoring, satellite systems, satellite power systems, simulated data, real-time monitoring, data fusion, operator workload reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.