The DOI matches its Crossref record; the references it cites are not checked yet.
Perancangan dan Implementasi Komunikasi RS-485 Menggunakan Protokol Modbus RTU dan Modbus TCP Pada Sistem Pick-By-Light
Open accessAbstract
The industrial process requires high productivity in every activity. An example is a process of taking items in the storage area. The current system is that the operator takes the items by manually searching in the storage. It will cause problems, namely, the process of taking items takes a long time or occurred a mistake in taking items. The purpose of this research is to design a pick-by-light system with RS-485 serial communication and TCP/IP using the Modbus protocol to support efficient production activities. Pick-by-light is a system consisting of a lightweight device as a sign that an item must be taken, a button to confirm that an item has been taken, and a processing device to process data. The result of this research shows that the pick-by-light system can work properly by implementing RS-485 serial communication with the Modbus Protocol and TCP/IP communication with the Modbus TCP protocol. These results are obtained from tests that have been carried out with different communications using RS-485 serial communication and TCP/IP. It can be applied to manufacturing and warehousing industries to increasing the productivity of items taking.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Pick-to-light systems in manufacturing provide benefits including increased productivity and improved logistics operations.
“These papers collectively demonstrate the benefits and potential of pick-to-light systems in manufacturing, including increased productivity and improved logistics operations.”
From Poka Yoke in Smart Production Systems with Pick-to-Light Implementation to Increase Efficiency (2023) · cites this paper as [17]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
The citation lists haven’t been fetched yet
References 13 · Cited by 9
Research works printed but not linked: 5
- J. Prod. Res., vol. 54, no. 8, pp. 2260-2274, 2016.
- T. Kugelstadt, "The RS-485 Design Guide Application Report The RS-485 Design Guide," no. October, pp. 1-10, 2008.
- J. Bhatt and H. Verma, "RS-485/MODBUS based Intelligent Building Automation System using LabVIEW," 4th Int. Conf. Comput. Appl. Electr. Eng. Adv., p. 5, 2010.
- J. K. R. Sastry, A. Suresh, and S. J. S. Bhanu, "Building heterogeneous distributed embedded systems through rs485 communication protocol," ARPN J. Eng. Appl. Sci., vol. 10, no. 16, pp. 6793-6803, 2015.
- A. Salam and T. Sucita, "Rancang Bangun Sistem Jaringan Multidrop Menggunakan Rs485," electrans, vol. 11, no. 2, pp. 1-11, 2012.
Metadata
- Authors
- Tosin, T.
- Affiliations
- Universitas Komputer Indonesia (ID)
- Corresponding author
- Tosin, Tosin
- Venue
- Komputika Jurnal Sistem Komputer
- Publisher
- Universitas Komputer Indonesia
- Published
- 2021-03-28
- Volume
- 10
- Issue
- 1
- Pages
- 85-91
- ISSN
- 2252-9039 (ISSN-L)
- 2655-3198
- OpenAlex
- W3152777639
- Cited by
- 9
- References
- 13
- Citations by year
- 2024: 3 · 2023: 6
- FWCI
- 1.00
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- cc-by-sa
- Locations
- Komputika Jurnal Sistem Komputer (publishedVersion, cc-by-sa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Industrial Automation and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Embedded Systems and FPGA Design
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Manufacturing and Logistics Optimization
- Keywords
- RS485 serial communication, Modbus RTU, Modbus TCP, TCP/IP, warehouse order picking, industrial communication protocols
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
