The DOI matches its Crossref record.
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting
Open accessAbstract
Selective laser melting (SLM) is a relatively new additive manufacturing (AM) technology which uses laser energy for manufacturing in a layered pattern. The unique manufacturing process of SLM offers a competitive advantage in case of very complex and highly customized parts having quasi-static mechanical properties comparable to those of wrought materials. However, it is not currently being harnessed in dynamic applications due to the lack of reliable fatigue data. The manufacturing process shows competitive advantages particularly in the aerospace and medical industry in which Ti-6Al-4V is commonly used, especially for high performance and dynamic applications. Therefore, in this exploratory research, high cycle fatigue (HCF) tests were performed for as-built, polished and shot-peened samples to investigate the capability of SLM for these applications. As-built samples showed a drastic decrement of fatigue limit due to poor surface quality (R a ≈ 13 µm) obtained from the SLM process. Polishing improved the fatigue limit to more than 500 MPa, the typical value for base material. The effect of shot-peening proved to be antithetical to the expected results. In this context, fractographic analysis showed that very small remnant porosity (less than 0.4%) played a critical role in fatigue performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Defect formation mechanisms in selective laser melting: a review
Zhang, B., Li, Y., & Bai, Q. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0121-5 · Cited by 924
Metadata
- Authors
- Wycisk, E., Emmelmann, C., Siddique, S., & Walther, F.
- Venue
- Advanced Materials Research
- Publisher
- Trans Tech Publications, Ltd.
- Published
- 2013-09-23
- Volume
- 816-817
- Pages
- 134-139
- ISSN
- 1022-6680 (ISSN-L)
- 1662-8985
- OpenAlex
- W2060238700
- Cited by
- 215
- References
- 0
- FWCI
- 10.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting. https://app.cochat.ai/papers/10.4028/www.scientific.net/amr.816-817.134
- The paper
- Wycisk, E., Emmelmann, C., Siddique, S., & Walther, F. (2013). High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting. Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/amr.816-817.134
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.