Cited by 1,730Carbon Dioxide Capture TechnologiesIndustrial Gas Emission ControlCO2 Sequestration and Geologic Interactions

The DOI matches its Crossref record; 212 of the 221 references it cites were found in a registry or an index.

A Review of CO2 Capture by Absorption and Adsorption

Open access

Yu, Cheng-Hsiu, Huang, Chih-Hung, Tan, Chung-Sung·2012·Aerosol and Air Quality Research

DOI 10.4209/aaqr.2012.05.0132

Open this paper in CoChat — free account Open PDF

Abstract

Global warming resulting from the emission of greenhouse gases, especially CO2, has become a widespread concern in the recent years. Though various CO2 capture technologies have been proposed, chemical absorption and adsorption are currently believed to be the most suitable ones for post-combustion power plants. The operation of the chemical absorption process is reviewed in this work, together with the use of absorbents, such as the ionic liquid, alkanolamines and their blended aqueous solutions. The major concerns for this technology, including CO2 capture efficiency, absorption rate, energy required in regeneration, and volume of absorber, are addressed. For adsorption, in addition to physical adsorbents, various mesoporous solid adsorbents impregnated with polyamines and grafted with aminosilanes are reviewed in this work. The major concerns for selection of adsorbent, including cost, adsorption rate, CO2 adsorption capacity, and thermal stability, are compared and discussed. More effective and less energy-consuming regeneration techniques for CO2-loaded adsorbents are also proposed. Future works for both absorption and adsorption are suggested.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.4209/aaqr.2012.05.0132

Cites

212 of 212 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Selective gas adsorption and separation in metal–organic frameworks
Li, J., Kuppler, R. J., & Zhou, H.-C. “. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,945
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,468
High-Throughput Synthesis of Zeolitic Imidazolate Frameworks and Application to CO 2 Capture
Banerjee, R., Phan, A., Wang, B., Knobler, C. B., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2008) · Science · doi:10.1126/science.1152516 · Cited by 4,213
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydın, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,963
Metal− organic frameworks with exceptionally high capacity for storage of carbon dioxide at room temperature
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,602
CO 2 Capture by a Task-Specific Ionic Liquid
Bates, E. D., Mayton, R., Ntai, I., & Davis, J. H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja017593d · Cited by 2,273
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J., Ma, Y., McCarthy, M. C., Sculley, J. P., Yu, J., Jeong, H., Balbuena, P. B., & Zhou, H.-C. “. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,049
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021

Flagged first, then by citations

Show all 221 references

9 of the 221 references couldn’t be matched to a known paper.

Research works printed but not linked: 5

Breckenridge, W. Holiday, A., Ong, J. O. Y and Sharp, C. (2000). Use of SELEXOL Process in Coke Gasification to Ammonia Project, Laurance Reid Gas Conditioning Conference.
Chakravarti, S., Gupta, A. and Hunek, B. (2001). Advanced Technology for the Capture of Carbon Dioxide from Flue Gases, First National Conference on Carbon Sequestration.
Fowler, R., Gendes, K.F. and Nyguard, H.F. (1989) Commercial Scale Demonstration of Higee for Bilk CO 2 Removal and Gas Dehydration. 21st Annual Offshore Technology Conference, Houston, TX.
IPCC (2005). Special Report on Carbon Capture and Storage, In Working Group III of the Intergovernmental Panel on Climate Change, Metz, B. et al. (Eds.) Cambridge, UK, New York.
Knapp, H. (1968). Processing Gas Conditioning Conference, Norman, Okla. p. C-1.

Sorted by citations

Items 201–300 of 1,002

Trends and Prospects in UiO‐66 Metal‐Organic Framework for CO 2 Capture, Separation, and Conversion
Usman, M., Helal, A., Abdelnaby, M. M., Alloush, A. M., Zeama, M., & Yamani, Z. H. (2021) · The Chemical Record · doi:10.1002/tcr.202100030 · Cited by 89
Integrated capture and conversion of CO2 into methane using NaNO3/MgO + Ru/Al2O3 as a catalytic sorbent
Park, S. J., Bukhovko, M. P., & Jones, C. W. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130369 · Cited by 89
A review on metal-organic frameworks as filler in mixed matrix membrane: Recent strategies to surpass upper bound for CO2 separation
Buddin, M. M. H. S., & Ahmad, A. L. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101616 · Cited by 88
Preparation and characterization of PEI-loaded MCM-41 for CO2 capture
Le, M. U. T., Lee, S., & Park, S. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.112 · Cited by 88
Improvement of CO2 capture by graphite oxide in presence of polyethylenimine
Shin, G.-J., Rhee, K. Y., & Park, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.162 · Cited by 88
The effect of pore structure on the CO2 adsorption efficiency of polyamine impregnated porous carbons
Gibson, J. A. A., Gromov, A. V., Brandani, S., & Campbell, E. E. B. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.01.044 · Cited by 92
Carbon dioxide removal using carbon monolith as electric swing adsorption to improve indoor air quality
Lee, T. S., Cho, J. H., & Chi, S. H. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.04.028 · Cited by 86
Preparation of foamed and unfoamed geopolymer/NaX zeolite/activated carbon composites for CO2 adsorption
Candamano, S., Policicchio, A., Conte, G., Abarca, R., Algieri, C., Chakraborty, S., Curcio, S., Calabrò, V., Crea, F., & Agostino, R. G. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129843 · Cited by 88
Multicriteria Environmental and Economic Analysis of Municipal Solid Waste Incineration Power Plant with Carbon Capture and Separation from the Life-Cycle Perspective
Tang, Y., & You, F. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03283 · Cited by 93
Amine Modification of Binder-Containing Zeolite 4A Bodies for Post-Combustion CO 2 Capture
Panda, D., Kumar, E. A., & Singh, S. K. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b03958 · Cited by 87
Multi-variable study/optimization of a novel geothermal-driven poly-generation system: Application of a soft-computing intelligent procedure and MOGWO
Haghghi, M. A., Mohammadi, Z., Delpisheh, M., Nadimi, E., & Athari, H. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2023.01.041 · Cited by 85
A review on adsorption-enhanced photoreduction of carbon dioxide by nanocomposite materials
Xiang, X., Pan, F., & Li, Y. (2017) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-017-0001-6 · Cited by 86
Hydrate-based removal of carbon dioxide and hydrogen sulphide from biogas mixtures: Experimental investigation and energy evaluations
Castellani, B., Rossi, F., Filipponi, M., & Nicolini, A. (2014) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2014.08.026 · Cited by 84
Comparative Analysis of the Efficiency Penalty in Power Plants of Different Amine-Based Solvents for CO2 Capture
Romeo, L. M., Minguell, D., Shirmohammadi, R., & Andrés, J. M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01483 · Cited by 87
Evaluation of porous clay heterostructures modified with amine species as adsorbent for the CO2 capture
Vilarrasa‐García, E., Cecilia, J. A., Azevedo, D. C. S., Cavalcante, C. L., & Rodrı́guez-Castellón, E. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.04.049 · Cited by 84
Encapsulated Ionic Liquids to Enable the Practical Application of Amino Acid-Based Ionic Liquids in CO2 Capture
Santiago, R., Lemus, J., Moya, C., Moreno, D., Alonso‐Morales, N., & Palomar, J. F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02797 · Cited by 83
Hydroxide modified activated alumina as an adsorbent for CO2 adsorption: Experimental and modeling
Mohammad, N. K., Ghaemi, A., & Tahvildari, K. (2019) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2019.05.029 · Cited by 86
CO2 adsorption on zeolite 13X modified with hydrophobic octadecyltrimethoxysilane for indoor application
Kim, M., Lee, J. W., Kim, S., & Kang, Y. T. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130597 · Cited by 83
Exfoliated Ni-Al LDH 2D nanosheets for intermediate temperature CO2 capture
Hanif, A., Sun, M., Shang, S., Tian, Y., Yip, A. C. K., Ok, Y. S., Yu, I. K. M., Tsang, D. C. W., Gu, Q., & Shang, J. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.04.049 · Cited by 82
Synthesis, characterization, and CO 2 adsorption properties of metal organic framework Fe-BDC
Mahdipoor, H. R., Halladj, R., Babakhani, E. G., Amjad‐Iranagh, S., & Ahari, J. S. (2021) · RSC Advances · doi:10.1039/d0ra09292d · Cited by 82
Applicability of linear polyethylenimine supported on nano-silica for the adsorption of CO 2 from various sources including dry air
Zhang, H., Goeppert, A., Prakash, G. K. S., & Olah, G. A. (2015) · RSC Advances · doi:10.1039/c5ra05428a · Cited by 86
A systemic review of hydrogen supply chain in energy transition
Ma, H., Sun, Z., Xue, Z., Zhang, C., & Chen, Z. (2023) · Frontiers in Energy · doi:10.1007/s11708-023-0861-0 · Cited by 87
Carbon Dioxide Capture and Conversion Using Metal–Organic Framework (MOF) Materials: A Comprehensive Review
Kong, F., & Chen, W. (2024) · Nanomaterials · doi:10.3390/nano14161340 · Cited by 83
Determination and analysis of CO2 capture kinetics and mechanisms on the novel graphene-based adsorbents
Kudahi, S. N., Noorpoor, A., & Mahmoodi, N. M. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.06.010 · Cited by 80
Conversion of CO 2 from air into formate using amines and phosphorus-nitrogen PN 3 P-Ru( ii ) pincer complexes
Guan, C., Pan, Y., Ang, E. P. L., Hu, H., Yao, C., Huang, M., Li, H., Lai, Z., & Huang, K. (2018) · Green Chemistry · doi:10.1039/c8gc02186d · Cited by 80
Kinetic modeling on CO2 capture using basic oxygen furnace slag coupled with cold-rolling wastewater in a rotating packed bed
Chang, E. E., Chen, T.-L., Pan, S.-Y., Chen, Y.-H., & Chiang, P. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.06.052 · Cited by 80
Real-Time Monitoring of Emissions from Monoethanolamine-Based Industrial Scale Carbon Capture Facilities
Zhu, L., Schade, G. W., & Nielsen, C. J. (2013) · Environmental Science & Technology · doi:10.1021/es4035045 · Cited by 80
Enhancing Degradation Resistance of Polyethylenimine for CO 2 Capture with Cross-Linked Poly(vinyl alcohol)
Zhai, Y., & Chuang, S. S. C. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03636 · Cited by 84
Recent Progress in the Theoretical Investigation of Electrocatalytic Reduction of CO 2
Tian, Z., Priest, C. W., & Chen, L. (2018) · Advanced Theory and Simulations · doi:10.1002/adts.201800004 · Cited by 81
State-of-the-art modification of polymeric membranes by PEO and PEG for carbon dioxide separation: A review of the current status and future perspectives
Kargari, A., & Rezaeinia, S. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.12.020 · Cited by 79
Synthesis of different modified magnetic nanoparticles for selective physical/chemical absorption of CO2 in a bubble column reactor
Elhambakhsh, A., Zaeri, M. R., Mehdipour, M., & Keshavarz, P. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.104195 · Cited by 79
Recent developments of deep eutectic solvent as absorbent for CO2 removal from syngas produced from gasification: Current status, challenges, and further research
Wibowo, H., Susanto, H., Grisdanurak, N., Hantoko, D., Yoshikawa, K., Huan, Q., & Yan, M. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.105439 · Cited by 80
Direct Air Capture of CO 2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents
Min, Y. J., Ganesan, A., Realff, M. J., & Jones, C. W. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11143 · Cited by 79
Mass transfer performance of CO2 capture in rotating packed bed: Dimensionless modeling and intelligent prediction
Zhao, B., Su, Y., & Tao, W. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.108 · Cited by 79
Textural properties determined CO2 capture of tetraethylenepentamine loaded SiO2 nanowires from α-sepiolite
Ouyang, J., Zheng, C., Gu, W., Zhang, Y., Yang, H., & Suib, S. L. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.109 · Cited by 79
Absorption of CO 2 from natural gas using different amino acid salt solutions and regeneration using hollow fiber membrane contactors
Rahim, N. A., Ghasem, N. M., & Al-Marzouqi, M. H. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2015.06.010 · Cited by 79
One-pot synthesis of digestate-derived biochar for carbon dioxide capture
Qiao, Y., Zhang, S., Quan, C., Gao, N., Johnston, C., & Wu, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.118525 · Cited by 78
Adsorption–desorption of CO 2 on zeolite-Y-templated carbon at various temperatures
Gunawan, T., Wijiyanti, R., & Widiastuti, N. (2018) · RSC Advances · doi:10.1039/c8ra09200a · Cited by 81
Efficacies of Carbon-Based Adsorbents for Carbon Dioxide Capture
Khandaker, T., Hossain, M. S., Dhar, P. K., Rahman, M. S., Hossain, M. A., & Ahmed, M. B. (2020) · Processes · doi:10.3390/pr8060654 · Cited by 79
Cryogenic pressure temperature swing adsorption process for natural gas upgrade
Moreira, M. A., Ribeiro, A. M., Ferreira, A. F. P., & Rodrigues, A. E. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.09.044 · Cited by 81
CO 2 utilization through integration of post-combustion carbon capture process with Fischer-Tropsch gas-to-liquid (GTL) processes
Rafiee, A., Panahi, M., & Khalilpour, K. R. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.016 · Cited by 78
Recent progress in materials development for CO 2 conversion: issues and challenges
Ghosh, S., Modak, A., Samanta, A., Kole, K., & Jana, S. (2021) · Materials Advances · doi:10.1039/d1ma00107h · Cited by 78
Solvent-free self-assembly synthesis of N-doped ordered mesoporous carbons as effective and bifunctional materials for CO2 capture and oxygen reduction reaction
Liu, X., Zhou, Y., Wang, C., Liu, Y., & Tao, D. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130878 · Cited by 77
Carbon Capture Using Porous Silica Materials
Amaraweera, S. M., Gunathilake, C. A., Gunawardene, O. H. P., Dassanayake, R. S., Cho, E., & Du, Y. (2023) · Nanomaterials · doi:10.3390/nano13142050 · Cited by 80
Amine impregnated porous silica gel sorbents synthesized from water–glass precursors for CO2 capturing
Minju, N., Pullanchiyodan, A., Nair, B. N., Mohamed, A. P., & ANANTHAKUMAR, S. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.01.069 · Cited by 77
Ionic liquids in gas separation processing
Shang, D., Liu, X., Bai, L., Zeng, S., Xu, Q., Gao, H., & Zhang, X. (2017) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2017.03.015 · Cited by 79
The beneficial impacts of functional groups of CNT on structure and gas separation properties of PEBA mixed matrix membranes
Amirkhani, F., Mosadegh, M., Asghari, M., & Parnian, M. J. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106285 · Cited by 76
In situ FTIR investigation of CO2 adsorption over MgO–Impregnated NaY zeolites
Bekhti, H., Boucheffa, Y., Aitblal, A., & Travert, A. (2021) · Vibrational Spectroscopy · doi:10.1016/j.vibspec.2021.103313 · Cited by 76
Kinetic and Thermodynamic Characterization of Enhanced Carbon Dioxide Absorption Process with Lithium Oxide-Containing Ternary Molten Carbonate
Deng, B., Tang, J., Mao, X., Song, Y., Zhu, H., Xiao, W., & Wang, D. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b02955 · Cited by 80
Optimization of CO2Capture Process from Simulated Flue Gas by Dry Regenerable Alkali Metal Carbonate Based Adsorbent Using Response Surface Methodology
Amiri, M., Shahhosseini, S., & Ghaemi, A. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b03303 · Cited by 76
CO2 capture by ion exchange resins as amine functionalised adsorbents
Parvazinia, M., García, S., & Maroto‐Valer, M. M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.08.087 · Cited by 79
One-Pot Synthesis and Pelletizing of Polyethylenimine-Containing Mesoporous Silica Powders for CO2 Capture
Klinthong, W., Huang, C., & Tan, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b00644 · Cited by 76
Self-citation
A new honeycomb carbon monolith for CO2 capture by rapid temperature swing adsorption using steam regeneration
Verougstraete, B., Martín-Calvo, A., der Perre, S. V., Baron, G. V., Finsy, V., & Denayer, J. F. M. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123075 · Cited by 79
Ionic liquid containing amine-based silica aerogels for CO2 capture by fixed bed adsorption
Garip, M., & Gi̇zli̇, N. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.113227 · Cited by 75
In Silico Designing of an Industrially Sustainable Carbonic Anhydrase Using Molecular Dynamics Simulation
Bharatiy, S. K., Hazra, M., Paul, M., Mohapatra, S., Samantaray, D., Dubey, R. C., Sanyal, S., Datta, S., & Hazra, S. (2016) · ACS Omega · doi:10.1021/acsomega.6b00041 · Cited by 74
Periodic mesoporous organosilicas functionalized with a wide variety of amines for CO2 adsorption
Canck, E. D., Ascoop, I., Sayari, A., & Voort, P. V. D. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50393c · Cited by 75
Microfluidic Studies of Carbon Dioxide
Abolhasani, M., Günther, A., & Kumacheva, E. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403719 · Cited by 74
Functionalization of hollow silica microspheres by impregnation or grafted of amine groups for the CO2 capture
Cecilia, J. A., Vilarrasa‐García, E., García‐Sancho, C., Saboya, R. M. A., Azevedo, D. C. S., Cavalcante, C. L., & Rodríguez-Castellón, E. (2016) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2016.07.018 · Cited by 74
Hydrodynamic characteristics and mass transfer performance of rotating packed bed for CO2 removal by chemical absorption: A review
Zhang, W., Xie, P., Li, Y., Teng, L., & Zhu, J. (2020) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2020.103373 · Cited by 72
Review of nanoabsorbents for capture enhancement of CO2 and its industrial applications with design criteria
Lee, J. W., Kim, S., Pineda, I. T., & Kang, Y. T. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110524 · Cited by 72
Kinetics of CO2 capture by novel amine-functionalized magnesium oxide adsorbents
Alkadhem, A. M., Elgzoly, M. A. A., Alshami, A., & Onaizi, S. A. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.126258 · Cited by 72
MUF-16: A Robust Metal–Organic Framework for Pre- and Post-Combustion Carbon Dioxide Capture
Qazvini, O. T., & Telfer, S. G. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c01156 · Cited by 74
Wet impregnation of a commercial low cost silica using DETA for a fast post-combustion CO2 capture process
Martín, C. F., Sweatman, M. B., Brandani, S., & Fan, X. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.081 · Cited by 73
CO2 sensing properties and mechanism of PrFeO3 and NdFeO3 thick film sensor
Chen, Y., Wang, D., Qin, H., Zhang, H., Zhang, Z., Zhou, G., Gao, C., & Hu, J. (2018) · Journal of Rare Earths · doi:10.1016/j.jre.2018.06.007 · Cited by 72
Efficient hybrid modeling of CO2 absorption in aqueous solution of piperazine: Applications to energy and environment
Dashti, A., Raji, M., Razmi, A. R., Rezaei, N., Zendehboudi, S., & Asghari, M. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2019.01.019 · Cited by 71
Carbon dioxide removal from biogas through pressure swing adsorption – A review
Bahrun, M. H. V., Bono, A., Othman, N., & Zaini, M. A. A. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2022.05.012 · Cited by 74
Effect of operating variables on CO2 adsorption capacity of activated carbon, kaolinite, and activated carbon – kaolinite composite adsorbent
Akpasi, S. O., & Isa, Y. M. (2022) · Water-Energy Nexus · doi:10.1016/j.wen.2022.08.001 · Cited by 71
Review and analysis of porous adsorbents for effective CO2 capture
Foorginezhad, S., Weiland, F., Chen, Y., Hussain, S., & Ji, X. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115589 · Cited by 73
CO2 absorption and kinetic study in ionic liquid amine blends
Haider, M. B., Hussain, Z., & Kumar, R. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.10.044 · Cited by 71
Development of high-gravity technology for removing particulate and gaseous pollutant emissions: Principles and applications
Pan, S.-Y., Wang, P., Chen, Q., Jiang, W., Chu, Y., & Chiang, P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.108 · Cited by 71
A critical review to bridge the gaps between carbon capture, storage and use of CaCO3
Tan, W.-L., Ahmad, A. L., Leo, C. P., & Lam, S. S. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101333 · Cited by 70
Bench-scale demonstration of CO 2 capture with an electrochemically driven proton concentration process
Rahimi, M., Catalini, G., Puccini, M., & Hatton, T. A. (2020) · RSC Advances · doi:10.1039/d0ra02450c · Cited by 70
Recent development of membranes for carbon capture: From materials to asymmetric membranes
Jia, Y., Wong, K., Liang, C. Z., Wu, J., Chung, T., & Zhang, S. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101324 · Cited by 74
Diethanolamine impregnated palm shell activated carbon for CO 2 adsorption at elevated temperatures
Kongnoo, A., Intharapat, P., Worathanakul, P., & Phalakornkule, C. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.11.015 · Cited by 70
Porous carbon frameworks with high CO2 capture capacity derived from hierarchical polyimide/zeolitic imidazolate frameworks composite aerogels
Wu, T., Dong, J., France, K. J. D., Zhang, P., Zhao, X., & Zhang, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124927 · Cited by 70
CO2/N2 Separation Properties of Polyimide-Based Mixed-Matrix Membranes Comprising UiO-66 with Various Functionalities
Chuah, C. Y., Lee, J., Song, J., & Bae, T. (2020) · Membranes · doi:10.3390/membranes10070154 · Cited by 69
CO2 capture using in-situ polymerized amines into pore-expanded-SBA-15: Performance evaluation, kinetics, and adsorption isotherms
Al-Absi, A. A., Domin, A., Mohamedali, M., Benneker, A. M., & Mahinpey, N. (2022) · Fuel · doi:10.1016/j.fuel.2022.126401 · Cited by 70
Gas adsorption studies of CO2 and N2 in spatially aligned double-walled carbon nanotube arrays
Babu, D. J., Lange, M., Cherkashinin, G., Issanin, A., Staudt, R., & Schneider, J. J. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.045 · Cited by 69
Engineering, environmental and economic performance evaluation of high-gravity carbonation process for carbon capture and utilization
Pan, S.-Y., Lafuente, A. M. L., & Chiang, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.103 · Cited by 70
Efficient CO2 capture by a novel deep eutectic solvent through facile, one-pot synthesis with low energy consumption and feasible regeneration
Bi, Y., Hu, Z., Lin, X., Ahmad, N., Xu, J. H., & Xu, X. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.135798 · Cited by 69
Lightweight, flexible, and multifunctional anisotropic nanocellulose-based aerogels for CO2 adsorption
Wei, J., Geng, S., Hedlund, J., & Oksman, K. (2020) · Cellulose · doi:10.1007/s10570-019-02935-7 · Cited by 69
Techno-economic analysis of mechanical vapor recompression for process integration of post-combustion CO2 capture with downstream compression
Jeong, Y. S., Jung, J., Lee, U., Yang, C., & Han, C. (2015) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2015.08.016 · Cited by 68
Assessing the risk of corrosion in amine-based CO2 capture process
Krzemień, A., Więckol‐Ryk, A., Smoliński, A., Koteras, A., & Więcław‐Solny, L. (2016) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2016.05.020 · Cited by 68
Polyethylene Glycol (PEG) Addition to Polyethylenimine (PEI)-Impregnated Silica Increases Amine Accessibility during CO2 Sorption
Wang, L., Al-Aufi, M., Pacheco, C., Xie, L., & Rioux, R. M. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02798 · Cited by 68
CO2 capture with room temperature ionic liquids; coupled absorption/desorption and single module absorption in membrane contactor
Sohaib, Q., Vadillo, J. M., Gómez‐Coma, L., Albo, J., Druon-Bocquet, S., Irabien, Á., & Sánchez, J. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115719 · Cited by 68
A comprehensive overview of carbon dioxide capture: From materials, methods to industrial status
Pardo, S. C., Bhattacharyya, S. P., Yadav, R. M., Teixeira, A. P. D. C., Mata, M. A. C., Prasankumar, T., Kabbani, M. A., Kibria, M. G., Xu, T., Roy, S., et al. (2022) · Materials Today · doi:10.1016/j.mattod.2022.08.018 · Cited by 73
Carbon Dioxide Adsorption onto Polyethylenimine-Functionalized Porous Chitosan Beads
Fujiki, J., & Yogo, K. (2014) · Energy & Fuels · doi:10.1021/ef500975g · Cited by 70
Polyethyleneimine (PEI) loaded MgO-SiO 2 nanofibers from sepiolite minerals for reusable CO 2 capture/release applications
Ouyang, J., Gu, W., Zheng, C., Yang, H., Zhang, X., Ye-lin, J., Chen, J., & Jiang, J. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.11.023 · Cited by 68
Prediction of CO2 absorption by physical solvents using a chemoinformatics-based machine learning model
Li, H., Yan, D., Zhang, Z., & Lichtfouse, E. A. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00874-0 · Cited by 68
Advances and applications
Fegade, U. A., & Jethave, G. (2021) · Interface science and technology · doi:10.1016/b978-0-12-818805-7.00008-4 · Cited by 68
Modeling and simulation of CO2 separation from CO2/CH4 gaseous mixture using potassium glycinate, potassium argininate and sodium hydroxide liquid absorbents in the hollow fiber membrane contactor
Nakhjiri, A. T., Heydarinasab, A., Bakhtiari, O., & Mohammadi, T. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.01.068 · Cited by 67
Study of CO2 Adsorption on Chemically Modified Activated Carbon With Nitric Acid and Ammonium Aqueous
Giraldo, L., Vargas, D. P., & Moreno‐Piraján, J. C. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.543452 · Cited by 67
Insights into the Hydrothermal Stability of Triamine‐Functionalized SBA‐15 Silica for CO2 Adsorption
Lashaki, M. J., Ziaei‐Azad, H., & Sayari, A. (2017) · ChemSusChem · doi:10.1002/cssc.201701439 · Cited by 69
The effect of membrane pores wettability on CO2 removal from CO2/CH4 gaseous mixture using NaOH, MEA and TEA liquid absorbents in hollow fiber membrane contactor
Nakhjiri, A. T., Heydarinasab, A., Bakhtiari, O., & Mohammadi, T. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2017.12.012 · Cited by 66
A strategy of development and selection of absorbent for efficient CO2 capture: An overview of properties and performance
Tiwari, S. C., Bhardwaj, A., Nigam, K. D. P., Pant, K. K., & Upadhyayula, S. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.05.025 · Cited by 69
A comprehensive review on direct air carbon capture (DAC) technology by adsorption: From fundamentals to applications
Xu, H., Yu, L., Chong, C., & Wang, F. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.119119 · Cited by 71
Adsorptive separation of CO2 in sulfur-doped nanoporous carbons: Selectivity and breakthrough simulation
Saha, D., Orkoulas, G., Chen, J., & Hensley, D. K. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.12.015 · Cited by 66
Sorption-enhanced water gas shift reaction by in situ CO2 capture on an alkali metal salt-promoted MgO-CaCO3 sorbent
Hu, Y., Cui, H., Cheng, Z., & Zhou, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.209 · Cited by 66
The role of nanotechnology on post-combustion CO2 absorption in process industries
Kumar, R., Mangalapuri, R., Ahmadi, M. H., Vo, D. N., Solanki, R., & Kumar, P. (2020) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/ctaa002 · Cited by 65
Machine learning-based ionic liquids design and process simulation for CO2 separation from flue gas
Wang, K., Xu, H., Yang, C., & Qiu, T. (2020) · Green Energy & Environment · doi:10.1016/j.gee.2020.12.019 · Cited by 65

Authors: Yu, C.-H., Huang, C.-H., & Tan, C.-S.
Affiliations: National Tsing Hua University (TW)
ORCID: Yu, Cheng-Hsiu
Huang, Chih-Hung
Tan, Chung-Sung
Venue: Aerosol and Air Quality Research
Publisher: Springer Science and Business Media LLC
Published: 2012
Volume: 12
Issue: 5
Pages: 745-769
ISSN: 1680-8584 (ISSN-L)
2071-1409
DOI: 10.4209/aaqr.2012.05.0132
OpenAlex: W2144754980
Cited by: 1,730
References: 221
Citations by year: 2026: 93 · 2025: 129 · 2024: 141 · 2023: 159 · 2022: 149 · 2021: 156 · 2020: 157 · 2019: 138 · 2018: 119 · 2017: 142 · 2016: 131 · 2015: 102 · 2014: 79 · 2013: 32 · 2012: 2
FWCI: 105.24
Type: journal article
Language: en
Open access: gold
doi.org
Licence: cc-by-sa
Locations: Aerosol and Air Quality Research (publishedVersion, cc-by-sa)
Funders: National Science Council
National Tsing Hua University
Topics: Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
Keywords: CO2 capture, chemical absorption, adsorption, post-combustion CO2 capture, ionic liquids, amino alcohols, polyamines, aminosilanes, adsorbent regeneration, energy consumption, CO2 adsorption capacity, greenhouse gas emissions reduction

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

A Review of CO2 Capture by Absorption and Adsorption

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks