A Multifunctional Integrated Three-Level Inverter and On-Board Charger for Electric Vehicle Application
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
This paper presents a highly integrated 4-in-1 power electronics solution for 800V electric vehicle applications, combining on-board charging (OBC), DC boost charging, traction drive, and high-voltage/low-voltage (HV/LV) power conversion in a single housing. Integration is achieved through the use of motor windings for charging and a custom-designed three-port transformer that magnetically couples HV and LV batteries while ensuring galvanic isolation. The system also employs a three-phase open-ended winding machine (OEWM) to support both single-(1P) and three-phase (3P) AC charging. A dual-bank DC/DC architecture allows for seamless integration of a redundant auxiliary power module (APM), enhancing functional safety and autonomy. In AC charging mode, the three-level (3L) T-type inverter operates as a Vienna rectifier for 3P charging and as a totem-pole power factor correction (PFC) circuit for 1P charging, with the motor windings utilized as PFC inductors. In DC boost charging mode, the 3L inverter functions as a boost converter, stepping up the 400V DC input to the 800V battery. A triple active bridge (TAB) converter facilitates HV-to-HV and HV-to-LV DC/DC conversion and also functions as a Dual Active Bridge (DAB) during boost charging and traction modes. In traction mode, the T-type 3L inverter drives the motor. Finally, the system is benchmarked against conventional non-integrated designs, demonstrating significant improvements in cost, volume, and weight.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An Isolated Three-Port Bidirectional DC-DC Converter With Decoupled Power Flow Management
Zhao, C., Round, S. D., & Kolar, J. W. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2002056 · Cited by 900
Closed Form Solution for Minimum Conduction Loss Modulation of DAB Converters
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2157976 · Cited by 635
The Essence of Three-Phase PFC Rectifier Systems—Part II
Friedli, T., Hartmann, M., & Kolar, J. W. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2258472 · Cited by 457
A Review of Multilevel Inverter Topologies in Electric Vehicles: Current Status and Future Trends
Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3063550 · Cited by 424
Ahmad, A., Qin, Z., Wijekoon, T., & Bauer, P. (2022) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2022.3179743 · Cited by 160
Diab, M. S., Elserougi, A. A., Abdel-Khalik, A. S., Massoud, A. M., & Ahmed, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2555295 · Cited by 159
Zero Voltage Switching Criteria of Triple Active Bridge Converter
Purgat, P., Bandyopadhyay, S., Qin, Z., et al. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3027785 · Cited by 107
A Review of Electric Vehicle Auxiliary Power Modules: Challenges, Topologies, and Future Trends
Wang, C., Zheng, P., & Bauman, J. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3288393 · Cited by 102
Multivariable-Modulation-Based Conduction Loss Minimization in a Triple-Active-Bridge Converter
Dey, S., & Mallik, A. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3141334 · Cited by 90
Multiphase Traction Inverters: State-of-the-Art Review and Future Trends
Taha, W., Azer, P., Callegaro, A. D., & Emadi, A. (2022) · IEEE Access · doi:10.1109/access.2022.3141542 · Cited by 81
Self-citation
Cited by
SuperBox: A 4-in-1 Power Electronics Solution for Dual-Motor Electric Vehicles
Taha, W., Wang, Y., Anand, A., & Mohammadi, H. (2025) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec63604.2025.11097934 · Cited by 2
Self-citationTriple Active Bridge Topology Selection and Design for Integrated On-Board Chargers
Taha, W., Chakkalakkal, S., Kozielski, K., Haridas, A. K., Vaghasiya, K. M., Prajapati, G., Wang, Y., Anand, A., & Emadi, A. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259827
Self-citationWang, H., Kallur-Krishnamoorthy, R., Neuhaus, C., et al. (2026) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2026-01-0739
Metadata
- Authors
- Wang, Y., Taha, W., & Anand, A.
- Affiliations
- Schaeffler (Germany) (DE)
- Venue
- SAE Technical Paper Series
- Publisher
- SAE International
- Published
- 2025-04-01
- Volume
- 1
- ISSN
- 0148-7191 (ISSN-L)
- 2688-3627
- OpenAlex
- W4409017335
- Semantic Scholar
- e1bfd63a092724c17fb7b0016313b6ab9eb70c7f
- Cited by
- 3
- References
- 26
- Citations by year
- 2026: 1 · 2025: 2
- FWCI
- 6.54
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- SAE technical papers on CD-ROM/SAE technical paper series (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- electric vehicle drivetrain, on-board charger, three-level inverter, T-type inverter, Vienna rectifier, power factor correction, dual active bridge converter, galvanic isolation, DC-DC converter, auxiliary power module, traction drives, power electronics integration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Multifunctional Integrated Three-Level Inverter and On-Board Charger for Electric Vehicle Application. https://app.cochat.ai/papers/10.4271/2025-01-8567
- The paper
- Wang, Y., Taha, W., & Anand, A. (2025). A Multifunctional Integrated Three-Level Inverter and On-Board Charger for Electric Vehicle Application. SAE Technical Paper Series. https://doi.org/10.4271/2025-01-8567
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.