The DOI matches its OpenAlex record; 2 of the 2 references it cites were found in a registry or an index.
An Overview of the Aerosol Deposition Method: Process Fundamentals and New Trends in Materials Applications
Abstract
Ceramic materials typically have to be sintered at high temperatures, often above 1000 °C. This precludes the coating of lower-melting substrate materials, such as metals, glasses and polymers, with dense and robust thin or thick ceramic films. In addition, decomposition or uncontrolled volatilization of the ceramic components can occur at elevated temperatures. As an alternative, the Aerosol Deposition (AD) method is a spray coating process to produce dense and nanocrystalline ceramic films at room temperature directly from an initial bulk powder on almost any substrate material with no need for sintering. This great potential attracts the attention of a growing number of research groups as reflected by a rapidly growing number of publications. The objective of this review is to give a holistic overview of the AD science and technology. It describes typical process equipment and parameters and starting powder and resulting film characteristics. Special attention is given to Al2O3, TiO 2, BaTiO3 and Pb(Zr,Ti)O3, as they represent a few of the most frequently used ceramics in AD. Aerosol Deposition of many other materials are also described to demonstrate the versatility of this new technology, its ability to realize novel combinations of materials and microstructures, and its suitability for future applications. Also discussed is the current state of understanding of aerosol deposition behavior and the experimental and modeling approaches used to explain the primary aerosol deposition mechanism(s).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bonding mechanism in cold gas spraying
Assadi, H., Gärtner, F., Stoltenhoff, T., & Kreye, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00274-x · Cited by 1,811
From Particle Acceleration to Impact and Bonding in Cold Spraying
Schmidt, T., Assadi, H., Gärtner, F., Richter, H., Stoltenhoff, T., Kreye, H., & Klassen, T. (2009) · Journal of Thermal Spray Technology · doi:10.1007/s11666-009-9357-7 · Cited by 638
Cited by
Cold spraying – A materials perspective
Assadi, H., Kreye, H., Gärtner, F., & Klassen, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.034 · Cited by 946
All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production
Schnell, J., Günther, T., Knoche, T., Vieider, C., Köhler, L., Just, A., Keller, M., Passerini, S., & Reinhart, G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.062 · Cited by 646
The 2016 Thermal Spray Roadmap
Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., Boulos, M., Brogan, J., Bourtsalas, A. C., Dolatabadi, A., et al. (2016) · Journal of Thermal Spray Technology · doi:10.1007/s11666-016-0473-x · Cited by 334
Metadata
- Authors
- Hanft, D., Exner, J., Schubert, M., Stöcker, T., Fuierer, P. A., & Moos, R.
- Published
- 2015-01-01
- OpenAlex
- W1476086300
- Cited by
- 239
- References
- 2
- FWCI
- 26.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Overview of the Aerosol Deposition Method: Process Fundamentals and New Trends in Materials Applications. https://app.cochat.ai/papers/10.4416/jcst2015-00018
- The paper
- Hanft, D., Exner, J., Schubert, M., Stöcker, T., Fuierer, P. A., & Moos, R. (2015). An Overview of the Aerosol Deposition Method: Process Fundamentals and New Trends in Materials Applications. https://doi.org/10.4416/jcst2015-00018
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.