The use of activated carbon modified with polypyrrole as a supporting electrode for lithium ions adsorption in capacitive deionization
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Nowadays, lithium is a raw and substantial material used in various industries. In this paper, we investigated a possibility of preparation of selective and effective lithium adsorbent, used in an electrode for capacitive deionization process. Polypyrrole (PPy) modified activated carbon is applied to supporting electrode manufacturing. Lithium adsorbent was obtained by solid-state reaction of lithium and manganese carbonate and titanium dioxide. The structure of obtained material was confirmed by X-ray diffraction. The supporting electrode was prepared in series of various content of PPy. The best adsorption system of lithium ions, from diluted aqueous solution, was revealed by lithium adsorbent and supporting electrode containing 2% PPy. The electrosorption capacity for LiCl was maintained at 36.9 mg g -1 . In the same system, electrosorption of NaCl was 18.09 mg g -1 and of KCl 9.07 mg g -1 . That confirmed selectivity of obtained material toward lithium.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
Cited by
Nikkhah, H., Ipekçi, D., Xiang, W., Stoll, Z., Xu, P., Li, B., McCutcheon, J. R., & Beykal, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155349 · Cited by 154
Lithium and Magnesium Separation from Brines by Hybrid Capacitive Deionization
Siekierka, A. (2022) · Desalination · doi:10.1016/j.desal.2022.115569 · Cited by 64
Self-citationSiekierka, A. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116234 · Cited by 46
Self-citationLithium dedicated adsorbent for the preparation of electrodes useful in the ion pumping method
Siekierka, A., Kujawa, J., Kujawski, W., & Bryjak, M. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.11.045 · Cited by 43
Self-citationHybrid capacitive deionization with anion-exchange membranes for lithium extraction
Siekierka, A., & Bryjak, M. (2017) · E3S Web of Conferences · doi:10.1051/e3sconf/20172200157 · Cited by 25
Self-citation
Metadata
- Authors
- Siekierka, A., Bryjak, M., & Wolska, J.
- Venue
- Desalination and Water Treatment
- Publisher
- Elsevier BV
- Published
- 2017-02
- Volume
- 64
- Pages
- 251-254
- ISSN
- 1944-3986 (ISSN-L)
- OpenAlex
- W2596090470
- Cited by
- 18
- References
- 1
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The use of activated carbon modified with polypyrrole as a supporting electrode for lithium ions adsorption in capacitive deionization. https://app.cochat.ai/papers/10.5004/dwt.2017.11387
- The paper
- Siekierka, A., Bryjak, M., & Wolska, J. (2017). The use of activated carbon modified with polypyrrole as a supporting electrode for lithium ions adsorption in capacitive deionization. Desalination and Water Treatment. https://doi.org/10.5004/dwt.2017.11387
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.