The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Continuous monitoring of the boundary-layer top with lidar
Open accessAbstract
Abstract. Continuous lidar observations of the top height of the boundary layer (BL top) have been performed at Leipzig (51.3° N, 12.4° E), Germany, since August 2005. The results of measurements taken with a compact, automated Raman lidar over a one–year period (February 2006 to January 2007) are presented. Main goals of the study are (a) to demonstrate that BL top monitoring with lidar throughout the year is possible, (b) to present the required data analysis method that permits an automated, robust retrieval of BL top at all weather situations, and (c) to use this opportunity to compare the lidar-derived BL top data with respective BL tops hourly predicted by the regional weather forecast model COSMO. Four different lidar methods for the determination of the BL top are discussed. The wavelet covariance algorithm is modified so that an automated retrieval of BL depths from lidar data is possible. Three case studies of simultaneous observations with the Raman lidar, a vertical-wind Doppler lidar, and accompanying radiosonde profiling of temperature and humidity are presented to compare the potential and the limits of the four lidar techniques. The statistical analysis of the one-year data set reveals that the seasonal mean of the daytime (about 08:00–20:00 Local Time, LT) maximum BL top is 1400 m in spring, 1800 m in summer, 1200 m in autumn, and 800 m in winter at the continental, central European site. BL top typically increases by 100–300 m per hour in the morning of convective days. The comparison between the lidar-derived BL top heights and the predictions of COSMO yields a general underestimation of the BL top by about 20% by the model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Boundary Layer Meteorology
(1988) · Springer eBooks · doi:10.1007/978-94-009-3027-8 · Cited by 10,224
Review and intercomparison of operational methods for the determination of the mixing height
Seibert, P. (2000) · Atmospheric Environment · doi:10.1016/s1352-2310(99)00349-0 · Cited by 1,066
Ansmann, A., Wandinger, U., Riebesell, M., Weitkamp, C., & Michaelis, W. (1992) · Applied Optics · doi:10.1364/ao.31.007113 · Cited by 752
Self-citationAerosol‐type‐dependent lidar ratios observed with Raman lidar
Müller, D., Ansmann, A., Mattis, I., Tesche, M., Wandinger, U., Althausen, D., & Pisani, G. (2007) · Journal of Geophysical Research Atmospheres · doi:10.1029/2006jd008292 · Cited by 606
Self-citationEvaluation and model impacts of alternative boundary-layer height formulations
Vogelezang, D. H. P., & Holtslag, A. A. M. (1996) · Boundary-Layer Meteorology · doi:10.1007/bf02430331 · Cited by 561
Campbell, J. R., Hlavka, D. L., Welton, E. J., Flynn, C. J., Turner, D. D., Spinhirne, J. D., Scott, V. S., & Hwang, I. H. (2002) · Journal of Atmospheric and Oceanic Technology · doi:10.1175/1520-0426(2002)019<0431:ftesca>2.0.co;2 · Cited by 368
Brooks, I. M. (2003) · Journal of Atmospheric and Oceanic Technology · doi:10.1175/1520-0426(2003)020<1092:fbltao>2.0.co;2 · Cited by 359
Urban boundary-layer height determination from lidar measurements over the Paris area
Menut, L., Flamant, C., Pelon, J., & Flamant, P. H. (1999) · Applied Optics · doi:10.1364/ao.38.000945 · Cited by 342
Müller, D., Mattis, I., Wandinger, U., Ansmann, A., Althausen, D., & Stohl, A. (2005) · Journal of Geophysical Research: Atmospheres · doi:10.1029/2004jd005756 · Cited by 262
Self-citationMixing height estimation from sodar data — A critical discussion
Beyrich, F. (1997) · Atmospheric Environment · doi:10.1016/s1352-2310(97)00231-8 · Cited by 237
Cited by
Engelmann, R., Kanitz, T., Baars, H., Heese, B., Althausen, D., Skupin, A., Wandinger, U., Komppula, M., Stachlewska, I. S., Amiridis, V., et al. (2016) · Atmospheric Measurement Techniques · doi:10.5194/amt-9-1767-2016 · Cited by 339
Self-citationLarge‐eddy simulations over Germany using ICON: a comprehensive evaluation
Heinze, R., Dipankar, A., Henken, C. C., Moseley, C., Sourdeval, O., Trömel, S., Xie, X., Adamidis, P., Ament, F., Baars, H., et al. (2017) · Quarterly Journal of the Royal Meteorological Society · doi:10.1002/qj.2947 · Cited by 293
Self-citationPikridas, M., Bezantakos, S., Močnik, G., Keleshis, C., Brechtel, F., Stavroulas, I., Demetriades, G., Antoniou, P., Vouterakos, P., Argyrides, M., et al. (2019) · Atmospheric Measurement Techniques · doi:10.5194/amt-12-6425-2019 · Cited by 60
Metadata
- Authors
- Baars, H., Ansmann, A., Engelmann, R., & Althausen, D.
- Venue
- Atmospheric Chemistry and Physics
- Publisher
- Copernicus GmbH
- Published
- 2008-12-10
- Volume
- 8
- Issue
- 23
- Pages
- 7281-7296
- ISSN
- 1680-7316 (ISSN-L)
- 1680-7324
- OpenAlex
- W2157862942
- Cited by
- 290
- References
- 15
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Continuous monitoring of the boundary-layer top with lidar. https://app.cochat.ai/papers/10.5194/acp-8-7281-2008
- The paper
- Baars, H., Ansmann, A., Engelmann, R., & Althausen, D. (2008). Continuous monitoring of the boundary-layer top with lidar. Atmospheric Chemistry and Physics. https://doi.org/10.5194/acp-8-7281-2008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.