The DOI matches its Crossref record.
Unification of height systems using chronometric geodesy – A more realistic scenario
Open accessAbstract
Simulation study of chronometric-geodesy-based height-system reunification under realistic local height errors, including systematic tilts and noisy levelling lines.
Overview
CoChat Summary
TL;DR
This conference abstract reports a simulation study on unifying local height systems using chronometric geodesy, in which terrestrial optical atomic clocks measure gravitational potential (height) differences via relativistic redshift. The authors test a more realistic error scenario and conclude that chronometric leveling can complement or partly replace traditional spirit leveling.
Key findings
- Relative height measurement via clock frequency comparison can estimate discrepancies between local and regional height systems to an accuracy of 1 cm, using high-performance clocks with fractional frequency uncertainty of about 10⁻¹⁸.
- Error accumulation over long distances does not affect clock measurements, in contrast to classical spirit leveling.
- The accuracy of estimating specific height errors in the involved systems depends strongly on the number of clocks and their spatial distribution within each local system, so these must be optimized for each test case.
- Chronometric leveling is presented as a promising technique that can complement and partly replace traditional geodetic methods.
Methods
- Simulation study: a known a priori height system was split into local systems affected by various errors, and reunification was carried out using simulated clock measurements.
- More realistic error scenarios were assumed for local height values, including systematic tilts that accumulate with distance from the tide gauges, effects due to the elevation of the leveling points, and the presence of noisy leveling lines.
- External tidal effects at each clock site were also considered for a more realistic comparison.
Limitations
- Stated by the paper: accuracy in estimating specific height errors depends on the number of clocks and their spatial distribution in each local system, and these must be optimized in each test case.
- Evident from the text: results are based on simulated clock measurements rather than real clock data, and the abstract reports no quantitative error statistics beyond the 1 cm accuracy figure and the ~10⁻¹⁸ fractional frequency uncertainty.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 1 Not valid · 0 Not checked · 4 Own results and interpretations
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The accuracy in the estimation of specific height errors in the involved systems highly depends upon the number of clocks and their spatial distribution in each local system and hence, they have to be optimized in each test case.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Hence, the fractional frequency difference between two terrestrial atomic clocks provides the gravitational potential difference or the corresponding height difference between them.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“This novel method of relative height measurement can be used in estimating the discrepancies between local and regional height systems to an accuracy of 1 cm with high-performance clocks achieving a fractional frequency uncertainty of about 10-18.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Probably not a substantial claim. 1
- It may state two separate claims as one. 2
Citations
Metadata
- Authors
- Vincent, A., Mueller, J., & Shabanloui, A.
- Affiliations
- Leibniz University Hannover (DE)
- Corresponding author
- Vincent, Asha
- Mueller, Juergen
- Publisher
- Copernicus GmbH
- Published
- 2023-05-15
- OpenAlex
- W4321489762
- Cited by
- 0
- References
- 0
- Type
- conference abstract
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Topics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Advanced Frequency and Time Standards
- Physical Sciences › Engineering › Aerospace Engineering › GNSS positioning and interference
- Physical Sciences › Earth and Planetary Sciences › Geophysics › Geophysics and Gravity Measurements
- Keywords
- atomic clocks, gravitational redshift, tide gauge, leveling errors, tidal effects, spirit leveling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Unification of height systems using chronometric geodesy – A more realistic scenario. https://app.cochat.ai/papers/10.5194/egusphere-egu23-4316
- The paper
- Vincent, A., Mueller, J., & Shabanloui, A. (2023). Unification of height systems using chronometric geodesy – A more realistic scenario. https://doi.org/10.5194/egusphere-egu23-4316
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.