Statistical analysis of energy consumption, tool wear and surface roughness in machining of Titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Productivity and economy are key elements of any sustainable manufacturing system. While productivity is associated to quantity and quality, economy focuses on energy efficient processes achieving an overall high output to input ratio. Machining of hard-to-cut materials has always posed a challenge due to increased tool wear and energy loss. Cryogenics have emerged as an effective means to improve sustainability in the recent past. In the present research the use of cooling conditions has been investigated as an input variable to analyze its effect on tool wear, specific cutting energy and surface roughness in combination with other input machining parameters of feed rate, cutting speed and depth of cut. Experimental design was based on Taguchi design of experiment. Analysis of Variance (ANOVA) was carried out to ascertain the contribution ratio of each input. Results showed the positive effect of coolant usage, particularly cryogenic, on process responses. Tool wear was improved by 33 % whereas specific cutting energy and surface roughness were improved by 10 % and 9 % respectively by adapting the optimum machining conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dry machining: Machining of the future
Sreejith, P. S., & Ngoi, B. K. A. (2000) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00445-3 · Cited by 684 · cited 1×
“The cost effects of coolant needs to be weighed against advantages as coolants accounts for almost 20 % of the total manufacturing cost (Shokrani et al., 2012; Sreejith and Ngoi, 2000).”
BackgroundNew observations on the mechanism of chip formation when machining titanium alloys
Komanduri, R., & Von Turkovich, B. F. (1981) · Wear · doi:10.1016/0043-1648(81)90242-8 · Cited by 405 · cited 1×
“…pursuit of improving overall efficiency because of the hard-to-cut status of titanium alloys Keeping in view titanium tool wear researchers have recommended cutting velocity between 30–60 m min−1 (Komanduri and Von Turkovich, 1981; Kitagawa et al., 1997) but that comes at the cost of productivity.”
BackgroundPrasanna, J., Karunamoorthy, L., Venkat Raman, M., Prashanth, S., & Raj Chordia, D. (2014) · Measurement · doi:10.1016/j.measurement.2013.11.020 · Cited by 150 · cited 1×
“Prasanna et al. (2014) considered feed, speed and air pressure during dry drilling of Ti-6Al-4V to optimize overcut, taper circularity and cutting forces.”
Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach
Jaffery, S. I., & Mativenga, P. T. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1393-9 · Cited by 119
Self-citationZain, A. M., Haron, H., & Sharif, S. (2010) · Machining Science and Technology · doi:10.1080/10910340903586558 · Cited by 46 · cited 1×
“Zain et al. (2010) optimized surface roughness using simulated annealing in end milling.”
Method
Cited by
Younas, M., Jaffery, S. H. I., Khan, A., & Khan, M. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.12.060 · Cited by 78
Self-citationInvestigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools
Younas, M., Khan, M., Jaffery, S. H. I., Khan, Z., & Khan, N. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13548-1 · Cited by 17
Self-citationHassan, A., Khan, M. A., Younas, M., Jaffery, S. H. I., Khan, M., Ahmed, N., & Awang, M. (2024) · International Journal of Automotive and Mechanical Engineering · doi:10.15282/ijame.21.2.2024.11.0874 · Cited by 4
Self-citation
Metadata
- Authors
- Ali Khan, M., Jaffery, S. H. I., Khan, M., Younas, M., Butt, S. I., Ahmad, R., & Warsi, S. S.
- Venue
- Mechanical Sciences
- Publisher
- Copernicus GmbH
- Published
- 2019-12-04
- Volume
- 10
- Issue
- 2
- Pages
- 561-573
- ISSN
- 2191-9151 (ISSN-L)
- 2191-916X
- OpenAlex
- W2994132924
- Cited by
- 58
- References
- 5
- FWCI
- 2.65
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Statistical analysis of energy consumption, tool wear and surface roughness in machining of Titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions. https://app.cochat.ai/papers/10.5194/ms-10-561-2019
- The paper
- Ali Khan, M., Jaffery, S. H. I., Khan, M., Younas, M., Butt, S. I., Ahmad, R., & Warsi, S. S. (2019). Statistical analysis of energy consumption, tool wear and surface roughness in machining of Titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions. Mechanical Sciences. https://doi.org/10.5194/ms-10-561-2019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.