The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Grand challenges in the design, manufacture, and operation of future wind turbine systems
Open accessAbstract
Abstract. Wind energy is foundational for achieving 100 % renewable electricity production, and significant innovation is required as the grid expands and accommodates hybrid plant systems, energy-intensive products such as fuels, and a transitioning transportation sector. The sizable investments required for wind power plant development and integration make the financial and operational risks of change very high in all applications but especially offshore. Dependence on a high level of modeling and simulation accuracy to mitigate risk and ensure operational performance is essential. Therefore, the modeling chain from the large-scale inflow down to the material microstructure, and all the steps in between, needs to predict how the wind turbine system will respond and perform to allow innovative solutions to enter commercial application. Critical unknowns in the design, manufacturing, and operability of future turbine and plant systems are articulated, and recommendations for research action are laid out. This article focuses on the many unknowns that affect the ability to push the frontiers in the design of turbine and plant systems. Modern turbine rotors operate through the entire atmospheric boundary layer, outside the bounds of historic design assumptions, which requires reassessing design processes and approaches. Traditional aerodynamics and aeroelastic modeling approaches are pressing against the limits of applicability for the size and flexibility of future architectures and flow physics fundamentals. Offshore wind turbines have additional motion and hydrodynamic load drivers that are formidable modeling challenges. Uncertainty in turbine wakes complicates structural loading and energy production estimates, both around a single plant and for downstream plants, which requires innovation in plant operations and flow control to achieve full energy capture and load alleviation potential. Opportunities in co-design can bring controls upstream into design optimization if captured in design-level models of the physical phenomena. It is a research challenge to integrate improved materials into the manufacture of ever-larger components while maintaining quality and reducing cost. High-performance computing used in high-fidelity, physics-resolving simulations offer opportunities to improve design tools through artificial intelligence and machine learning, but even the high-fidelity tools are yet to be fully validated. Finally, key actions needed to continue the progress of wind energy technology toward even lower cost and greater functionality are recommended.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
The Wiener--Askey Polynomial Chaos for Stochastic Differential Equations
Xiu, D., & Karniadakis, G. E. (2002) · SIAM Journal on Scientific Computing · doi:10.1137/s1064827501387826 · Cited by 4,807
Williamson, C. H. K., & Govardhan, R. (2004) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.36.050802.122128 · Cited by 2,487
The Unreasonable Effectiveness of Data
Halevy, A., Norvig, P., & Pereira, F. (2009) · IEEE Intelligent Systems · doi:10.1109/mis.2009.36 · Cited by 1,767
Verification and Validation in Scientific Computing
Oberkampf, W. L., & Roy, C. J. (2010) · doi:10.1017/cbo9780511760396 · Cited by 1,556
Grand challenges in the science of wind energy
Veers, P., Dykes, K., Lantz, E., Barth, S., Bottasso, C. L., Carlson, O., Clifton, A., Green, J., Green, P., Holttinen, H., et al. (2019) · Science · doi:10.1126/science.aau2027 · Cited by 1,242
Self-citationWind-Turbine and Wind-Farm Flows: A Review
Porté-Agel, F., Bastankhah, M., & Shamsoddin, S. (2020) · Boundary-Layer Meteorology · doi:10.1007/s10546-019-00473-0 · Cited by 1,117
Large eddy simulation study of fully developed wind-turbine array boundary layers
Calaf, M., Meneveau, C., & Meyers, J. (2010) · Physics of Fluids · doi:10.1063/1.3291077 · Cited by 944
Uncertainty Quantification and Polynomial Chaos Techniques in Computational Fluid Dynamics
Najm, H. N. (2009) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.010908.165248 · Cited by 768
State of the art in wind turbine aerodynamics and aeroelasticity
Hansen, M. O. L., Sørensen, J. N., Voutsinas, S., Sørensen, N., & Madsen, H. A. (2006) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2006.10.002 · Cited by 756
Self-citation
Metadata
- Authors
- Veers, P., Bottasso, C. L., Manuel, L., Naughton, J., Pao, L., Paquette, J., Robertson, A., Robinson, M., Ananthan, S., Barlas, T., Bianchini, A., Bredmose, H., Horcas, S. G., Keller, J., Madsen, H. A., Manwell, J., Moriarty, P., Nolet, S., & Rinker, J.
- Venue
- Wind Energy Science
- Publisher
- Copernicus GmbH
- Published
- 2023-07-11
- Volume
- 8
- Issue
- 7
- Pages
- 1071-1131
- ISSN
- 2366-7443 (ISSN-L)
- 2366-7451
- OpenAlex
- W4383982525
- Cited by
- 260
- References
- 85
- FWCI
- 31.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Grand challenges in the design, manufacture, and operation of future wind turbine systems. https://app.cochat.ai/papers/10.5194/wes-8-1071-2023
- The paper
- Veers, P., Bottasso, C. L., Manuel, L., Naughton, J., Pao, L., Paquette, J., Robertson, A., Robinson, M., Ananthan, S., Barlas, T., Bianchini, A., Bredmose, H., Horcas, S. G., Keller, J., Madsen, H. A., Manwell, J., Moriarty, P., Nolet, S., & Rinker, J. (2023). Grand challenges in the design, manufacture, and operation of future wind turbine systems. Wind Energy Science. https://doi.org/10.5194/wes-8-1071-2023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.