Mesoscopic Mechanical Analysis of Filled Elastomer with 3D-Finite Element Analysis and Transmission Electron Microtomography
The DOI matches its Crossref record.
Abstract
Analysis of deformation of the filled elastomer in mesoscopic scale was investigated with 3-D FEM (Finite Element Analysis). Combination of 3-D TEMT (Transmission Electron Micro Tomography) and Voxel-FEM enables us to reconstruct mesoscopic scale 3-D image and calculate 3-D strain distribution. To the first approximation, the calculated stress-strain behavior shows a good agreement with the experimental results. The strain concentration over 200% can be seen between carbon black aggregates, even if the overall strain is only 15%. The rubber occluded by carbon black aggregates can also be observed. The virtual rubber model constructed with perfectly dispersed fillers was also calculated. This shows less overall stress than that of the actual filled model reconstructed with 3-D TEMT image. It is found that the occluded rubber can behave as a hard domain and is an important factor of the filler reinforcement effect on rubber.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“When a pre-cracked particle-reinforced elastomer specimen with a 4 × 5 mm 2 cross-section was loaded in tension, Akutagawa et al. [398] found a highly localized strain region near the crack tip in a roughly circular area with diameter 0.5 mm.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [398]
In the citing paper
“When the applied global strain was about 15%, they found a strikingly high strain concentration, about 200%, between the fillers.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [398]
In the citing paper
“This agrees with the three-to 13-fold strain localization observed in the experiments [398,399].”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [398]
Citations
Cites
Still being checked.
Cited by
Nguyen, T. T., Yvonnet, J., Zhu, Q.-Z., Bornert, M., & Chateau, C. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.10.007 · Cited by 359
3D stereolithography printing of graphene oxide reinforced complex architectures
Lin, D., Jin, S., Zhang, F., Wang, C., Wang, Y., Zhou, C., & Cheng, G. J. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/43/434003 · Cited by 228
Challenges in Multiscale Modeling of Polymer Dynamics
Li, Y., Abberton, B., Kröger, M., & Liu, W. (2013) · Polymers · doi:10.3390/polym5020751 · Cited by 222
“This agrees with the three- to 13-fold strain localization observed in the experiments [398,399].”
BackgroundResultTransmission electron microtomography in polymer research
Jinnai, H., & Spontak, R. J. (2008) · Polymer · doi:10.1016/j.polymer.2008.12.023 · Cited by 143
Self-citationFLOCCULATION, REINFORCEMENT, AND GLASS TRANSITION EFFECTS IN SILICA-FILLED STYRENE-BUTADIENE RUBBER
Robertson, C. G., Lin, C. J., Bogoslovov, R. B., Rackaitis, M., Sadhukhan, P., Quinn, J. D., & Roland, C. M. (2011) · Rubber Chemistry and Technology · doi:10.5254/1.3601885 · Cited by 120
Metadata
- Authors
- Akutagawa, K., Yamaguchi, K., Yamamoto, A., Heguri, H., Jinnai, H., & Shinbori, Y.
- Affiliations
- Bridgestone (Japan) (JP)
- Kyoto Institute of Technology (JP)
- Venue
- Rubber Chemistry and Technology
- Publisher
- Rubber Division, ACS
- Published
- 2008-05
- Volume
- 81
- Issue
- 2
- Pages
- 182-189
- ISSN
- 0035-9475 (ISSN-L)
- 1943-4804
- OpenAlex
- W2324373732
- Cited by
- 68
- References
- 0
- Citations by year
- 2024: 1 · 2023: 6 · 2022: 2 · 2021: 6 · 2020: 3 · 2019: 2 · 2018: 7 · 2017: 7 · 2016: 6 · 2015: 7 · 2014: 6 · 2013: 5 · 2012: 2
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Rubber Chemistry and Technology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and Applications
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Keywords
- carbon black aggregates, strain concentration, filler reinforcement, stress-strain behavior, 3D finite element analysis, 3D image reconstruction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mesoscopic Mechanical Analysis of Filled Elastomer with 3D-Finite Element Analysis and Transmission Electron Microtomography. https://app.cochat.ai/papers/10.5254/1.3548203
- The paper
- Akutagawa, K., Yamaguchi, K., Yamamoto, A., Heguri, H., Jinnai, H., & Shinbori, Y. (2008). Mesoscopic Mechanical Analysis of Filled Elastomer with 3D-Finite Element Analysis and Transmission Electron Microtomography. Rubber Chemistry and Technology. https://doi.org/10.5254/1.3548203
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.