Application of Waste Plastic Pyrolysis Oil in a Direct Injection Diesel Engine: For a Small Scale Non-Grid Electrification
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Waste plastic can be transformed to oil by the pyrolysis and it may be applicable as a fuel for diesel engines. The pyrolysis oil property varies depending on the raw waste plastic and the pyrolysis condition, which is different from that of diesel and gasoline. Considering the thermal efficiency, the running stability and the reliability, diesel engines are the most promising energy converter to generate electricity by using the pyrolysis oil. In this research, plastics from municipal wastes were converted into oil through the pyrolysis and the catalytic reforming process in a commercial facility. Compared with diesel fuel, the raw pyrolysis oil showed slightly lower kinematic viscosity than the minimum level of diesel fuel and almost the same heating value. Its carbon class differed from diesel, gasoline and kerosene and is mainly composed of naphethenes and olefins which have poor self-ignition quality. A single cylinder direct injection diesel engine was used for the test to show the compatibility of the pyrolysis oil to diesel fuel. The pyrolysis oil was blended with diesel fuel with different mixing ratios. The full load performance, the exhaust emission and the thermal efficiency were investigated from the view point of the compatibility to diesel based on the US EPA regulation mode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
What a Waste : A Global Review of Solid Waste Management
Hoornweg, D., & Bhada-Tata, P. (2012) · doi:10.1596/17388 · Cited by 3,129
Cited by
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Effect of plastic waste types on pyrolysis liquid oil
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., Ismail, I. M. I., & Nizami, A. S. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.09.017 · Cited by 505
Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Miandad, R., Rehan, M., Barakat, M. A., Aburiazaiza, A. S., Khan, H., Ismail, I. M. I., Dhavamani, J., Gardy, J., Hassanpour, A., & Nizami, A.-S. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00027 · Cited by 454
Sipra, A. T., Gao, N., & Sarwar, H. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.02.012 · Cited by 349
Metadata
- Authors
- Lee, S., Yoshida, K., & Yoshikawa, K.
- Venue
- Energy and Environment Research
- Published
- 2015-03-09
- Volume
- 5
- Issue
- 1
- ISSN
- 1927-0569 (ISSN-L)
- 1927-0577
- OpenAlex
- W2107254071
- Cited by
- 77
- References
- 1
- FWCI
- 5.17
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.