The DOI matches its Crossref record.
A comparison of existing surficial hydrological data layers in a low-relief forested Ontario landscape with those derived from a LiDAR DEM
Abstract
The current provincial-extent digital elevation model (DEM) and corresponding hydrological maps for Ontario have been produced using traditional photogrammetry and aerial photograph interpretation. This process is labour-intensive and requires visual interpretation of stereo image pairs. The ground surface and small hydrological features may be inaccurately delineated in areas where vegetation is dense or the ground is otherwise shielded from aerial view. In an effort to improve and automate delineation of hydrological features, we examined the behaviour and final products of the D8 flowrouting algorithm in 2 software environments (TAS and TauDEM for ArcGIS) operating on a high spatial resolution DEM derived using canopy-penetrating light detection and ranging (LiDAR) technology in a pilot study in the Romeo Malette Forest (41.25°N, 81.50°W). Filtered LiDAR data points (5-m spacing) were interpolated using IDW, TIN, and splines, each resulting in a 2.5-m spatial resolution DEM. Results demonstrate improved realism in the characterization of surficial hydrology by LIDAR derived products as compared to applying identical algorithms on existing coarser provincial data. Benefits include the ability to represent streams of lower Strahler order to define crisp watershed boundaries, and the more accurate identification of local depressions that form potentially wet sites. This approach identifies wet sites that should be avoided during forest operations (e.g., skidder traffic) and can provide additional information for trail layout, road planning, and water crossings. By increasing the number of uses of LiDAR, the capital investment in these data becomes increasingly palatable for forest companies interested in obtaining detailed plans of their forest holdings. Key words: LiDAR, DEM, OBM, spatial resolution, interpolation, Strahler stream order, flow routing, topographic wetness
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It was found that the high spatial resolution provided by the LiDAR DEM allowed a better prediction of smaller stream segments, improved definition on watershed extents, and provided details on areas of soil saturation which could improve management decisions of forest harvests.”
From Sensitivity of watershed attributes to spatial resolution and interpolation method of LiDAR DEMs in three distinct landscapes (2014) · cites this paper as Remmel et al., 2008
In the citing paper
“The choice of interpolation method for DEM generation is often made by LiDAR service providers on the basis of efficiency in data processing, and not optimized for intended DEM products.”
From Sensitivity of watershed attributes to spatial resolution and interpolation method of LiDAR DEMs in three distinct landscapes (2014) · cites this paper as Remmel et al., 2008
In the citing paper
“For example, Remmel et al. [2008] indicated the LiDAR DEM implemented in their study was created with an unknown interpolation method implemented by the service provider.”
From Sensitivity of watershed attributes to spatial resolution and interpolation method of LiDAR DEMs in three distinct landscapes (2014) · cites this paper as Remmel et al., 2008
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 32
- Li DEM, Geoderma, 132, 406
- Engineering, Remote Sensing, 69, 255
- Beven K.J., J. Kirkby., 197
- Fisheries, Aquatic Sciences, 57, 5
- Computers, Geosciences, 30, 1003
- Rocky Mountains. Hydrological Processes, 16, 3627
- Hydrology, 193, 204
- Hydrological Processes, 19, 1123, 10.1002/hyp.5818 · DOI
- Hydrological Processes, 19, 3113, 10.1002/hyp.5835 · DOI · Paper page
- Mardikis M.G., J. Kollias., 200
- Martz L.W., J. Garbrecht., 199
- Geosciences, 25, 835
- Mitasova H., J. Hofierka., 199
- Mathematical Geology, 25, 657, 10.1007/BF00893172 · DOI · Paper page
- Geology, 25, 641
- American Water Resources Association, 41, 763, 10.1111/j.1752-1688.2005.tb04463.x · doi:10.1111/j.1752-1688.2005.tb04463.x
- Image Processing, 28, 323
- Catena, 20, 199
- Rowe L.K., J. Pearce., 199
- Hydrological Processes, 8, 281, 10.1002/hyp.3360080402 · DOI
- Resources, 25, 1367
- Sørensen R., J. Seibert., 200
- Discussions, 2, 1807
- Sørensen R., J. Seibert., 200
- Society of, America Bulletin, 63, 923
- Remote Sensing, 72, 1265
- Water Resources Research, 33, 309, 10.1029/96WR03137 · DOI · Paper page
- Computers, Geosciences, 32, 452
- Journal, Hydrology, 240, 225
- Weber D.D., J. Englund., 199
- II. Mathematical Geology, 26, 589
- Zhou Q.M., J. Liu., 200
Cited by
Goulden, T., Hopkinson, C., Jamieson, R., & Sterling, S. (2014) · Water Resources Research · doi:10.1002/2013wr013846 · Cited by 55
Sensitivity of DEM, Slope, Aspect and Watershed Attributes to LiDAR Measurement Uncertainty
Goulden, T., Hopkinson, C., Jamieson, R., & Sterling, S. (2016) · Remote Sensing of Environment · doi:10.1016/j.rse.2016.03.005 · Cited by 51
Metadata
- Authors
- Remmel, T. K., Todd, K. W., & Buttle, J.
- Venue
- The Forestry Chronicle
- Publisher
- Canadian Institute of Forestry
- Published
- 2008-12-01
- Volume
- 84
- Issue
- 6
- Pages
- 850-865
- ISSN
- 0015-7546
- 1499-9315
- Cited by
- 13
- References
- 0
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A comparison of existing surficial hydrological data layers in a low-relief forested Ontario landscape with those derived from a LiDAR DEM. https://app.cochat.ai/papers/10.5558/tfc84850-6
- The paper
- Remmel, T. K., Todd, K. W., & Buttle, J. (2008). A comparison of existing surficial hydrological data layers in a low-relief forested Ontario landscape with those derived from a LiDAR DEM. The Forestry Chronicle. https://doi.org/10.5558/tfc84850-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.