CoChat
Sign Up
Cited by 12

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Photochromic Polypropylene Filaments: Impacts of Mechanical Properties on Kinetic Behaviour

Periyasamy, Aravin Prince, Vikova, Martina, Vik, Michal·2019·Fibres and Textiles in Eastern Europe
DOI 10.5604/01.3001.0013.0738
Open this paper in CoChat — free account

Abstract

Spiro [2H-indole-2,3'-[3H]naphth[2,1-b][1,4]oxazine],1,3-dihydro-1,3,3-trimethyl-6'-(1-piperidinyl) was incorporated onto polypropylene and photochromic polypropylene multifilaments produced through the mass coloration technique. Subsequently the polypropylene (PP) filaments were doped with a different concentration of photochromic pigment, and after producing the filaments different drawing ratios were applied. The photochromic colour build was found to be maximum with the highest concentration of dyes as well as with the lowest drawing ratio. Also the colour differences for L*, a*, b* and ΔE* were analysed with respect to the different concentrations and drawing ratios of the filament. The filaments generally showed good stability of photocoloration during the colour measurement till five cycles. The results for the optical density were reduced by increasing the fineness of the filament. In this experimental work, the impact of the drawing ratio on the optical and mechanical properties of these multifilaments were investigated.

Overview

Integrity signals

Registry

Crossref · 10.5604/01.3001.0013.0738

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The application of mass coloring or mass functionalization in melt extrusion (e.g., polylactic acid, viscose, infinna, spinnova, renewcell, ioncel) has the potential to decrease the pollution burden associated with both synthetic and regenerated fibers.

    “Furthermore, the application of mass coloring or mass functionalization in the process of melt extrusion, namely in the case of polylactic acid, or in manmade fibers like viscose, infinna, spinnova, renewcell and ioncel has the potential to decrease the pollution burden associated with both synthetic and regenerate fibers [336][337][338][339].”

    From Recent Advances in the Remediation of Textile-Dye-Containing Wastewater: Prioritizing Human Health and Sustainable Wastewater Treatment (2024) · cites this paper as [337]

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 29

  1. Crano JC, Guglielmetti R J. Organic Photochromic and Thermochromic Compounds, Kluwer Academic Publishers, New York, USA: New York, USA, 2002; 1. ISBN 0-306-45883-7. · DOI
  2. Tong Cheng, Tong Lin, Jian Fang, Brady R. Photochromic Wool Fabrics from a Hybrid Silica Coating. In Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi’an, China, 2006; China International Wool Textile Conference & IWTO Wool Forum: Xi/an, China, 2006; pp. 33–37.
  3. Little AF, Christie RM. Textile applications of photochromic dyes. Part 1: Establishment of a methodology for evaluation of photochromic textiles using traditional colour measurement instrumentation. Color Technol 2010; 126: 157–163. DOI:10.1111/j.1478-4408.2010.00241.x. · DOI
  4. Vikova M, Vik M. Periyasamy AP. Optical properties of photochromic pigment incorporated Polypropylene (PP) filaments:- influence of pigment concentrations & drawing ratio. In Workshop for Ph.D Students of Textile Engineering and Faculty of Mechanical Engineering, Technical University of Liberec. 2015; 3: 140–145.
  5. Lee SJ, Son YA Suh HJ, Lee DN, Kim SH. Preliminary exhaustion studies of spiroxazine dyes on polyamide fibers and their photochromic properties. Dye Pigment 2006; 69: 18–21. DOI:10.1016/j.dyepig.2005.02.019. · DOI
  6. Son YA, Park YM, Park SY, Shin CJ, Kim SH. Exhaustion studies of spiroxazine dye having reactive anchor on polyamide fibers and its photochromic properties. Dye Pigment 2007; 73: 76–80. DOI:10.1016/j.dyepig.2005.10.012. · DOI
  7. Billah SMR, Christie RM, Morgan KM. Direct coloration of textiles with photochromic dyes. Part 2: The effect of solvents on the colour change of photochromic textiles. Color. Technol. 2008; 124: 229–233. DOI:10.1111/j.1478-4408.2008.00146.x. · DOI
  8. Viková M, Vik M. Description of photochromic textile properties in selected color spaces. Text. Res. J. 2015; 85: 609–620. DOI:10.1177/0040517514549988. · DOI
  9. Periyasamy AP, Vikova M, Vik M. Problems in kinetic measurement of mass dyed Photochromic Polypropylene filaments with respect to different colour space systems. In 4th CIE Expert Symposium on Colour and Visual Appearance; CIE- Austria: Prague, 2016; pp. 325–333.
  10. Periyasamy AP, Viková M, Vik M. Optical properties of photochromic pigment incorporated into polypropylene filaments. Vlakna a Text. 2016; 23: 171–178.
  11. Hirte R. Polypropylene fibers – Science and technology. Acta Polym. 1983; 34, 1–594. DOI:10.1002/actp.1983.010340911. · DOI
  12. Marcinčin A. Dyeing of polypropylene fibers. In Polypropylene: An A-Z reference; Karger-Kocsis, J., Ed.; Springer Netherlands: Dordrecht, 1999; pp. 172–177. ISBN 978-94-011-4421-6.
  13. Mukhopadhyay S, Deopura BL, Alagirusamy R. Mechanical properties of polypropylene filaments drawn on varying post spinning temperature gradients. Fibers Polym. 2006; 7: 432–435. DOI:10.1007/BF02875777. · DOI
  14. Mukhopadhyay S, Deopura BL, Alagirusamy R. Studies on production of polypropylene filaments with increased temperature stability. J. Appl. Polym. Sci. 2006; 101: 838–842. DOI:10.1002/app.23207. · DOI
  15. Mukhopadhyay S, Deopura BL, Alagirusamy R. Effect of drawing different MFI polypropylene filaments on a gradient heater. Autex Res. J. 2006; 6: 136–141. DOI:10.1533/joti.2005.0043. · DOI
  16. Vik M, Vikova M, Periyasamy AP. Influence of SPD on Whiteness value of FWA treated samples. In 21st International Conference LIGHT SVĚTLO 2015, At Brno University of Technology, Czech Republic, Volume: 1; Brno University of Technology: Brno, Czech Republic, 2015; p. 5. · DOI
  17. Vikova M, Vik M. Smart Textile Sensors for Indication of UV radiation. In Autex World Conference-2006; AUTEX publications: Raleigh , North Carolina , USA, 2006; pp. 1–4.
  18. Viková, M, Vik M. Colour shift photochromic pigments in colour space CIE L*a*b*. Mol. Cryst. Liq. Cryst. 2005; 431: 403–415. DOI:10.1080/15421400590946947. · DOI
  19. Viková M, Periyasamy AP, Vik M, Ujhelyiová A. Effect of drawing ratio on difference in optical density and mechanical properties of mass colored photochromic polypropylene filaments. J. Text. Inst. 2017; 108: 1365–1370. DOI:10.1080/00405000.2016.1251290. · DOI · Paper page
  20. Periyasamy AP, Vikova M, Vik M. A review of photochromism in textiles and its measurement. Text. Prog. 2017; 49, 53–136. DOI:10.1080/00405167.2017.1305833. · DOI
  21. Seipel S, Yu J, Periyasamy AP, Viková M, Vik M, Nierstrasz VA. Resource-Efficient Production of a Smart Textile UV Sensor Using Photochromic Dyes: Characterization and Optimization. In Narrow and Smart Textiles; Kyosev, Y., Mahltig, B., Schwarz-Pfeiffer, A., Eds.; Springer International Publishing: Cham, 2018; pp. 251–257. ISBN 978-3-319-69050-6.
  22. Seipel S, Yu J, Periyasamy AP, Viková M, Vik M, Nierstrasz VA. Characterization and optimization of an inkjet-printed smart textile UV-sensor cured with UV-LED light. IOP Conf. Ser. Mater. Sci. Eng. 2017; 254: 1–4. DOI:10.1088/1757-899X/254/7/072023. · DOI
  23. Seipel S, Yu J, Periyasamy AP, Viková M, Vik M, Nierstrasz VA. Inkjet printing and UV-LED curing of photochromic dyes for functional and smart textile applications. RSC Adv. 2018; 8: 28395–28404. DOI:10.1039/C8RA05856C. · DOI
  24. Vikova M, Vik M. Alternative UV Sensors Based on Color-Changeable Pigments. Adv. Chem. Eng. Sci. 2011; 01: 224–230. DOI:10.4236/aces.2011.14032. · DOI
  25. Krohm F, Kind J, Savka R, Alcaraz Janßen M, Herold D, Plenio H, Thiele CM, Andrieu-Brunsen A. Photochromic spiropyran- and spirooxazine-homopolymers in mesoporous thin films by surface initiated ROMP. 00000 2016; 4: 4067–4076. DOI:10.1039/C5TC04054J. · DOI
  26. Hou, L.; Schmidt, H.; Hoffmann, B.; Mennig, M. Enhancement of the Photochromic Performance of Spirooxazine in Sol-Gel Derived Organic-Inorganic Hybrid Matrices by Additives. J. Sol-Gel Sci. Technol. 1997; 8: 927–929. DOI:10.1007/BF02436962. · DOI
  27. Little AF, Christie RM. Textile applications of photochromic dyes. Part 3: Factors affecting the technical performance of textiles screen-printed with commercial photochromic dyes. Color. Technol. 2011; 127: 275–281. DOI:10.1111/j.1478-4408.2011.00307.x. · DOI
  28. Vikova M, Vik M. The determination of absorbance and scattering coefficients for photochromic composition with the application of the black and white background method. Text. Res. J. 2015; 85: 1961–1971. DOI:10.1177/0040517515578332. · DOI
  29. Vikova M, Vik M. Photochromic Textiles and Measurement of Their Temperature Sensitivity. Res. J. Text. Appar. 2014; 18: 15–21. DOI:10.1108/RJTA-18-03-2014-B002. · DOI

Cited by

Sorted by citations

Metadata

Authors
Periyasamy, A. P., Vikova, M., & Vik, M.
Affiliations
Laboratory of Color and Appearance Measurement (LCAM), Department of Material Engineering, Technical University of Liberec, Czech Republic
Venue
Fibres and Textiles in Eastern Europe
Publisher
Walter de Gruyter GmbH
Published
2019-06-30
Volume
27
Issue
3(135)
Pages
19-25
ISSN
1230-3666
DOI
10.5604/01.3001.0013.0738
Cited by
12
References
1

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review