CoChat

Low-Sensitivity Design of Allpass Based Fractional Delay Digital Filters

Open access
Stoyanov, G., Nikolova, K., Kawamat, M. · 2011 · Digital Filters

The DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index; none of the 11 sources its claims cite is checked for support yet.

Abstract

Conventional linear digital circuits are providing usually a delay response that is equal to an integer number of sampling intervals (as in linear-phase FIR (finite-impulse-response) realizations) or is changing uncontrollably with the frequency (for all IIR (infinite-impulseresponse) digital filters). It appeared, however, that we might often need a circuit with a delay response that is a fraction of the sampling interval and is fixed or variable (or only adjustable). Design and implementation of such circuits with given and properly controlled fractional delay (FD) is the hottest digital filters topic in the last ten years. These circuits are invaluable in many telecommunications applications, like time adjustment and precise jitter elimination in digital receivers, echo cancellation, phase-array antenna systems, transmultiplexers, sample-rate converter and software radio. They are needed in speech synthesis and processing, image interpolation, sigma-delta modulators, time-delay estimation, in some biomedical applications and for modeling of musical instruments. Most of these applications are overviewed in (Laakso et al., 1996) and (Valimaki & Laakso, 2001).

Overview

CoChat Summary

TL;DR

This chapter proposes low-sensitivity design of allpass-based fractional delay digital filters by decomposing Thiran allpass transfer functions into first- and second-order sections and selecting or developing sections with minimized phase sensitivity for the actual pole zones. It reports improved fixed and variable FD accuracy under short coefficient wordlengths, including a new IS second-order allpass section for zone 2.

Key findings

  • FD allpass poles obtained via Thiran approximation occupy positions atypical for conventional filters; the unit circle is divided into 11 zones, and practical FD poles concentrate in zones 1, 2, 5, and 6, often only in zone 2.
  • The new second-order IS section has the lowest worst-case phase sensitivity for small FD values (poles in zone 2); GM2 and MH2B are suitable for zone 6, GM2 and MH2A for zones 1 and 5, while KW2A, KW2B, and ST2A generally cannot be recommended.
  • For a fixed 11th-order allpass FD filter with D = 11.2, the best section set (2MH2A+3IS+MH1) gives phase delay 11.195 instead of 11.2 even at 2-bit wordlength; the worst set (2KW2A+2KW2B+IS+SV, WSmax = 669) gives 11.235 at 4-bit CSD and is almost destroyed at 2 bits.
  • For variable second-order filters with d = 0.3 and third-order coefficient approximations, the IS structure has higher tuning accuracy than gathering and Cho-Parhi structures; near DC, IS deviations for 3 and 2 bits are −0.002 and −0.0179, versus −0.009/−0.041 for gathering and −0.0086/−0.041 for Cho-Parhi. The RDI method shows higher phase-delay error and loses maximally flat behavior for intermediate D.

Methods

  • Design uses Thiran approximation for maximally flat group-delay allpass transfer functions, then decomposes them into first- and second-order sections; low-sensitivity sections are selected or developed according to pole position zones, with worst-case and Schoeffler phase sensitivities evaluated using PANDA.
  • For variable FD filters, each transfer-function coefficient is expanded as a Taylor series in the fractional part d and truncated after the linear, quadratic, or cubic term; coefficients are realized as composite multipliers containing fixed and variable multipliers, avoiding a critical path.
  • Experiments simulate fixed 11th-order D = 11.2 filters with five section sets under coefficient quantization in CSD code, and second-order variable FD filters for d = 0.3 with I = P = T = 3 comparing gathering, Cho-Parhi, and IS structures; RDI is compared for 4th-order filters with D from 4.1 to 4.5.

Limitations

  • The paper states that parasitic noises of fixed-point arithmetic have not been investigated; they are expected to be low because of low sensitivity and central pole positions, but this remains to be verified in future work.
  • The paper states that transients in tunable IIR structures are not solved and need more efficient methods in future work.
  • The paper notes RDI limitations: complicated circuitry, narrow tuning range, growing tuning error, and no connection to a specific realization so sensitivity cannot be considered; gathering structure drawbacks include many multipliers/adders, long critical paths, and large coefficient spread.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.5772/15577

Cites

38 of 38 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Possible poles position of real poles (for odd-order TF) and of all the poles of sixth order allpass FD TF.
Fig. 1 Possible poles position of real poles (for odd-order TF) and of all the poles of sixth order allpass FD TF.From the PDF
Fig. 2 Different first-order allpass sections.
Fig. 2 Different first-order allpass sections.From the PDF
Fig. 3 Worst-case phase-sensitivities of first order allpass sections for different polepositions .
Fig. 3 Worst-case phase-sensitivities of first order allpass sections for different polepositions .From the PDF
Fig. 4 Zoning of the z -plane for allpass FD TFs pole positions.
Fig. 4 Zoning of the z -plane for allpass FD TFs pole positions.From the PDF
Image 5
From the PDF
Fig. 6 IS allpass section, suitable for FD filter realizations with TF poles in zone 2.
Fig. 6 IS allpass section, suitable for FD filter realizations with TF poles in zone 2.From the PDF
Fig. 7 Worst-case phase-sensitivities of second order allpass sections for TF poles in different zones.
Fig. 7 Worst-case phase-sensitivities of second order allpass sections for TF poles in different zones.From the PDF
Fig. 8 Pole-position plot of 11 -th order allpass FD filter realizing 11 2 .  D .
Fig. 8 Pole-position plot of 11 -th order allpass FD filter realizing 11 2 .  D .From the PDF
Fig. 9 Worst-case phase-sensitivities of different sets of sections realizing an 11 -th order allpass-based FD TF with 11.2  D .
Fig. 9 Worst-case phase-sensitivities of different sets of sections realizing an 11 -th order allpass-based FD TF with 11.2  D .From the PDF
Fig. 10 Composite variable multiplier realization of a (23) after a second order Taylor approximation.
Fig. 10 Composite variable multiplier realization of a (23) after a second order Taylor approximation.From the PDF
Fig. 11 Composite variable multiplier realization of a (24) after a third order Taylor approximation.
Fig. 11 Composite variable multiplier realization of a (24) after a third order Taylor approximation.From the PDF
Fig. 12 Gathering structure realizing a second-order variable FD allpass filter (with I = 3).
Fig. 12 Gathering structure realizing a second-order variable FD allpass filter (with I = 3).From the PDF
Fig. 13 Cho-Parhi structure realizing a second-order variable FD allpass filter ( P = 3).
Fig. 13 Cho-Parhi structure realizing a second-order variable FD allpass filter ( P = 3).From the PDF
Fig. 14 IS structure realizing a second-order variable FD allpass filter with T = 3.
Fig. 14 IS structure realizing a second-order variable FD allpass filter with T = 3.From the PDF
Fig. 15 Worst-case phase-sensitivities of second-order allpass based FD filter ( 3  I , 3  P , 3  T ).
Fig. 15 Worst-case phase-sensitivities of second-order allpass based FD filter ( 3  I , 3  P , 3  T ).From the PDF
Fig. 16 Phase delay responses of the quantized structures from Sect. 5 designed for D =11.2.
Fig. 16 Phase delay responses of the quantized structures from Sect. 5 designed for D =11.2.From the PDF
Fig. 17 Wordlength dependence of the accuracy of tuning of the phase delay of second order allpass FD filters realized as gathering-, Cho-Parhi- and IS-structures for 0 3 .  d in a case of 3  I , 3  P , 3  T .
Fig. 17 Wordlength dependence of the accuracy of tuning of the phase delay of second order allpass FD filters realized as gathering-, Cho-Parhi- and IS-structures for 0 3 .  d in a case of 3  I , 3  P , 3  T .From the PDF
Fig. 18 Tuning accuracy comparison of the root-displacement method and our method for 4 th order allpass FD filters for different values of D .
Fig. 18 Tuning accuracy comparison of the root-displacement method and our method for 4 th order allpass FD filters for different values of D .From the PDF
Image 19
From the PDF

Verification

Claims the paper makes

0 Valid · 2 Not valid · 9 Not checked · 41 Own results and interpretations

12 more claims

Create a free account to see all 52 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 29
  • Probably not a substantial claim. 7
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

Show all 38 references

Research works printed but not linked: 6

  1. Nikolova, K. & Stoyanov, G. (2008). 'А new method of design of variable fractional delay digital allpass filters', Proc. 43 th Intern. Conference ICEST' 2008, Nish, Serbia, vol. 1, pp. 75- 8, June 25-27, 2008.
  2. Nishihara, A. (1984). 'Low-sensitivity second-order digital filters - analysis and design in terms of frequency sensitivity', Trans. IECE of Japan , vol. E 67, No 8, pp. 433-439, Aug. 1984.
  3. Stoyanov, G. & Nishihara, A. (1995). 'Very low sensitivity design of digital IIR filters using parallel and cascade-parallel connections of allpass sections', Bulletin of INCOCSAT , Tokyo Institute of Technology, vol. 1, pp. 55-64, March 1995.
  4. Sugino, N. & Nishihara, A. (1990). 'Frequency-domain simulator of digital networks from the structural description', Trans. IECE of Japan , vol. E 73, No.11, pp. 1804-1806, Nov. 1990.
  5. Topalov, I. & Stoyanov, G. (1991). 'A systematic approach to the design of low-sensitivity limit-cycle-free universal bilinear and biquadratic digital filter sections', Proc. 10 th European Conf. on Circuit Theory and Design ( ECCTD '91), Copenhagen, Denmark, vol. 1, pp. 213-222, Sept. 02-06, 1991.
  6. Vesma, J. & Saramaki, T. (2000). 'Design and properties of polynomial-based fractionaldelay filters', Proc. ISCAS' 2000, Geneva, Switzerland, vol. 1, pp. 104-107, May 2000.

Cited by

Metadata

Authors
Stoyanov, G., Nikolova, K., & Kawamat, M.
Affiliations
  • Technical University of Sofia (BG)
  • Tohoku University (JP)
Venue
Digital Filters
Publisher
InTech
Published
2011-04-11
OpenAlex
W1579385901
Cited by
5
References
39
Citations by year
2018: 1 · 2016: 1 · 2014: 2 · 2013: 1
FWCI
3.48
Type
book chapter
Language
en
Open access
Licence
cc-by-nc-sa
Locations
  • InTech eBooks (publishedVersion, cc-by-nc-sa)
  • BiblioBoard Library Catalog (Open Research Library) (submittedVersion, cc-by-sa)
  • Contact-less Assessment of In-vivo Body Signals Using Microwave Doppler Radar (InTech) (submittedVersion, cc-by-nc-sa)
Funders
  • Bulgarian National Science Fund
  • Technical University of Sofia
Topics
  • Physical Sciences › Computer Science › Signal Processing › Digital Filter Design and Implementation
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
  • Physical Sciences › Computer Science › Signal Processing › Advanced Adaptive Filtering Techniques
Keywords
fractional delay filter, all-pass filter, digital filter design, variable delay, sampling rate conversion, transmultiplexer, echo cancellation, phased array antenna, time delay estimation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.