The DOI matches its Crossref record.
A Review of Mass Transfer Controlling the Reaction Rate in Heterogeneous Catalytic Systems
Open accessAbstract
Mass transfer limitations play an important role on the rate of reaction; the rate of conversion and product formation, including in the catalytic systems. In a homogeneous catalytic reaction in which all substances (reactant(s), product(s), and catalyst) are in the same phase, the effect of mass transfer between phases is mostly negligible. In a heterogeneous catalytic reaction; however, the catalyst is usually in a different phase from the reactant(s). Commonly the catalyst is in the solid phase embedded in the reacting species which usually are in the liquid or gaseous phase. Consequently, the reaction rate is principally relied on the mass transfer or diffusion between these phases. A lot of efforts have been made, due to the important roles of mass transfer effects on the reaction rate. The main purpose for this chapter is to apply the basic restriction of mass transfer on the heterogeneous catalytic reaction. The illustrations based on the literature reviews in the heterogeneous catalytic processes are conducted for elucidation. Since the reaction catalyzed by solid catalysts occurs when the reactant molecules come in contact with the active sites, which are usually located inside the catalyst pores. In other words, the catalytic reaction is taken place after the reactant molecules diffuse through the fluid layer surrounding the catalyst particles (external diffusion or film diffusion), then through the pore with in the particle (internal diffusion). The internal diffusion of the molecules competes with the reaction; at the same time, the external mass transfer is dependent on the stagnant film thickness and the activity on the outer layer. Hence, the diffusion of molecules is not only hindered by the other molecules, but also by the physical hindrances. The classical seven steps for a catalytic reaction (Fig. 1), i.e. (1) diffusion of the reactants from the bulk phase (boundary layer) to the external surface of the catalyst pellet (film diffusion or interphase diffusion), (2) diffusion of the reactant from the pore mouth through the catalyst pores to the immediate vicinity of the internal catalytic surface; the point where the chemical transformation occurs, (pore diffusion or intraparticle diffusion), (3) adsorption of reactants on the inner catalytic surface, (4) reaction at specific active sites on the catalyst surface, (5) desorption of the products from the inner surface, (6) diffusion of the products from the interior of the pellet to the pore mouth at the external surface, and (7) diffusion of the products from the external pellet surface to the bulk fluid (interphase diffusion), are generally used as the key for explanation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Alves, M., Grignard, B., Mereau, R., Jerome, C., Tassaing, T., & Detrembleur, C. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy00438a · Cited by 531
Multiple roles of graphene in heterogeneous catalysis
Fan, X., Zhang, G., & Zhang, F. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00094g · Cited by 383
Mohammed, A., Bissoon, R., Bajnath, E., Mohammed, K., Lee, T., Bissram, M., John, N., Jalsa, N. K., Lee, K.-Y., & Ward, K. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.067 · Cited by 104
Metadata
- Authors
- Klaewkla, R., Arend, M., & F., W.
- Venue
- Mass Transfer - Advanced Aspects
- Publisher
- InTech
- Published
- 2011-07-07
- OpenAlex
- W1480859926
- Cited by
- 161
- References
- 0
- FWCI
- 4.72
- Type
- book chapter
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.