The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lithium Dendrite Formation on a Lithium Metal Anode from Liquid, Polymer and Solid Electrolytes
Open accessAbstract
Lithium metal is the most attractive anode material for batteries because of its high specific capacity (3861 mAh g−1) and low negative potential (−3.04 V vs. NHE). However, lithium dendrite growth during lithium deposition leads to serious safety problems and poor cycling performance. The conventional liquid electrolyte used in lithium-ion batteries results in significant lithium dendrite formation at room temperature and a high current density. Thus, there has been much research effort to achieve the suppression of lithium dendrite formation. Recently, a new class of non-aqueous liquid electrolyte with a high concentration of lithium salts, such as solvated ionic liquid and solvent-in-salt electrolytes, has been reported to suppress lithium dendrite formation. Solid polymer electrolytes have been known to suppress lithium dendrite formation; however, the low lithium ion conductivity and high interface resistance between lithium and the polymer electrolyte at room temperature limits their use for conventional batteries. The interface resistance was significantly decreased by the addition of an ionic liquid into a polymer electrolyte and lithium dendrite formation was suppressed. A theoretical analysis predicted that if a homogenous solid electrolyte with a shear modulus of 6 GPa was obtained, then the lithium dendrite problem would be solved. However, some lithium conducting solid electrolytes such as Li7La3Zr2O12 still exhibit lithium dendrite formation. In this review, we introduce the recent status of lithium dendrite formation on lithium metal in contact with liquid, solid polymer, and solid electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Cited by
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Benchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes
Porz, L., Swamy, T., Sheldon, B. W., Rettenwander, D., Frömling, T., Thaman, H. L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701003 · Cited by 1,117
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Gel Polymer Electrolytes for Electrochemical Energy Storage
Cheng, X., Pan, J., Zhao, Y., Liao, M., & Peng, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702184 · Cited by 1,020
Metadata
- Authors
- TAKEDA, Y., YAMAMOTO, O., & IMANISHI, N.
- Venue
- Electrochemistry
- Publisher
- The Electrochemical Society of Japan
- Published
- 2016
- Volume
- 84
- Issue
- 4
- Pages
- 210-218
- ISSN
- 1344-3542 (ISSN-L)
- 2186-2451
- OpenAlex
- W2314173956
- Cited by
- 192
- References
- 2
- FWCI
- 7.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithium Dendrite Formation on a Lithium Metal Anode from Liquid, Polymer and Solid Electrolytes. https://app.cochat.ai/papers/10.5796/electrochemistry.84.210
- The paper
- TAKEDA, Y., YAMAMOTO, O., & IMANISHI, N. (2016). Lithium Dendrite Formation on a Lithium Metal Anode from Liquid, Polymer and Solid Electrolytes. Electrochemistry. https://doi.org/10.5796/electrochemistry.84.210
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.