The DOI matches its DataCite record; 3 of the 3 references it cites were found in a registry or an index.
Exploring diffusion of ultrasonically consolidated aluminum and copper films through scanning and transmission electron microscopy
Abstract
Ultrasonic consolidation (UC) is a promising manufacturing method for metal matrix composite pre-preg tapes or foils that utilizes a layer build-up technique. The process involves three main variables: applied load, oscillation amplitude, and rolling speed. A main advantage of this process is the ability to manufacture multi-material parts at lower processing temperatures compared to other metal matrix composites processes. A major disadvantage, however, is a lack of understanding of diffusion during the ultrasonic consolidation process, which is expected to affect the microstructure, bond quality, and strength within the interface region. The role of diffusion during the low temperature, short duration ultrasonic consolidation process was explored. First, scanning electron microscopy (SEM) x-ray energy dispersive spectroscopy (XEDS) was used to measure concentration profiles of ultrasonically consolidated high purity aluminum and copper through which the interdiffusion coefficients were calculated. It was found that the experimental accelerating voltage had a significant impact on the measurement of the concentration profiles, and associated interdiffusion coefficients, due to the interaction volume interference. The effect of the interaction volume on the concentration profiles was confirmed through Monte Carlo simulations of electron trajectories, and the error due the interaction volume was quantified. The results showed the diffusion distance was too small for accurate measurements with SEM XEDS even at low accelerating voltages. To significantly reduce the error due to the interaction volume, transmission electron microscopy (TEM) samples were prepared using a focused ion beam (FIB) to ensure a uniform thickness. The TEM XEDS concentration profile and images revealed intermetallic phase transformations that occurred during the welding process. TEM images also showed dislocation pile-up located at the subgrain/bulk aluminum interface. This microstructural feature supports continuous dynamic recrystallization of grains through the rearrangement of dislocations. The apparent interdiffusion coefficient closely matched the bulk diffusion concentration profile for the times and temperatures of the ultrasonically consolidated sample. Support for bulk diffusion was independently found through calculating the minimum critical temperature for bulk diffusion dominance over grain boundary diffusion for the grain sizes measured.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, based on the study of Sietins et al. [37,54] and some other studies [25,42], the thickness of intermetallic phases is very thin (less than 10 µm) and it might affect the hardness gradient.”
From Multi-layer solid-state ultrasonic additive manufacturing of aluminum/copper: local properties and texture (2024) · cites this paper as [37]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process
Abbasi, M., Karimi Taheri, A., & Salehi, M. T. (2001) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(01)00872-6 · Cited by 433
Some aspects of the growth of diffusion layers in binary systems
Kidson, G. V. (1961) · Journal of Nuclear Materials · doi:10.1016/0022-3115(61)90175-1 · Cited by 341
Bonding characteristics during very high power ultrasonic additive manufacturing of copper
Sriraman, M. R., Babu, S. S., & Short, M. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.12.040 · Cited by 145
Cited by
Behvar, A., Shakil, S. I., Pirgazi, H., Norfolk, M., & Haghshenas, M. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13490-2 · Cited by 21
Metadata
- Authors
- Sietins, J.
- Venue
- University of Delaware
- Publisher
- University of Delaware
- Published
- 2014
- References
- 3
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.