The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Evaluation and control of occupational health risks from nanoparticles
Open accessAbstract
Rapid growth in the nanoparticle industry is anticipated in the Nordic countries owing to highly focused national research and investment initiatives. Knowledge on consequences for occupational exposures to engineered nanoparticles and appropriate technical control levels is still limited. This report explores existing knowledge on exposure risks and technical control approaches. The report concludes that data are too limited to allow general conclusions to be drawn regarding risks of exposure to engineered nanoparticles.Engineering techniques for controlling nanoparticle exposure can build on the current knowledge and approaches to control exposure to e.g. welding fume and carbon black. There is a need for improving the quality of information provided in Material Safety Data Sheets.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Most nanomaterial exposures are in the form of agglomerates/aggregates; therefore, when particle sizes are measured, analysers are unable to reveal the agglomeration state and the degree to which an agglomerate can separate into several more units in the lung fluid [62].”
From Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use (2019) · cites this paper as [62]
In the citing paper
“Most nanomaterial exposures are in the form of agglomerates/aggregates; therefore, when particle sizes are measured, analysers are unable to reveal the agglomeration state and the degree to which an agglomerate can separate into several more units in the lung fluid [62].”
From Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use (2019) · cites this paper as [62]
Citations
Cites
An Introduction to the Rock-Forming Minerals
Deer, W. A., Howie, R. A., & Zussman, J. (2013) · Mineralogical Society of Great Britain and Ireland eBooks · doi:10.1180/dhz · Cited by 6,592
Lam, C.-W., James, J. T., McCluskey, R., Arepalli, S., & Hunter, R. L. (2006) · Critical Reviews in Toxicology · doi:10.1080/10408440600570233 · Cited by 1,237
Donaldson, K., Aitken, R., Tran, L., Stone, V., Duffin, R., Forrest, G., & Alexander, A. (2006) · Toxicological Sciences · doi:10.1093/toxsci/kfj130 · Cited by 1,167
Maynard, A. D., Baron, P. A., Foley, M., Shvedova, A. A., Kisin, E. R., & Castranova, V. (2004) · Journal of Toxicology and Environmental Health, Part A · doi:10.1080/15287390490253688 · Cited by 763
Nanotechnology: The Next Big Thing, or Much Ado about Nothing?
Maynard, A. (2006) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/mel071 · Cited by 322
Bałazy, A., Toivola, M., Reponen, T. A., Podgórski, A., Zimmer, A. T., & Grinshpun, S. A. (2005) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/mei058 · Cited by 246
Titanium Dioxide: Inhalation Toxicology and Epidemiology
Hext, P. M., Tomenson, J. A., & Thompson, P. E. (2005) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/mei012 · Cited by 170
Peters, T. M., Heitbrink, W. A., Evans, D. E., Slavin, T. J., & Maynard, A. (2005) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/mei061 · Cited by 124
Particle Characteristics in the Reactor and Pelletizing Areas of Carbon Black Production
Kuhlbusch, T. A. J., & Fissan, H. J. (2006) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459620600912280 · Cited by 95
Filtration Efficiency of Aerosol Particles Below 20 Nanometers
Heim, M., Mullins, B. J., Wild, M., Meyer, J., & Kasper, G. (2005) · Aerosol Science and Technology · doi:10.1080/02786820500227373 · Cited by 88
Cited by
A review on molten salt synthesis of metal oxide nanomaterials: Status, opportunity, and challenge
Gupta, S. K., & Mao, Y. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100734 · Cited by 361
Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use
Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A. (2019) · Materials · doi:10.3390/ma12193052 · Cited by 348
“Most nanomaterial exposures are in the form of agglomerates/aggregates; therefore, when particle sizes are measured, analysers are unable to reveal the agglomeration state and the degree to which an agglomerate can separate into several more units in the lung fluid [62].”
BackgroundHazards and Risks of Engineered Nanoparticles for the Environment and Human Health
Hristozov, D., & Malsch, I. (2009) · Sustainability · doi:10.3390/su1041161 · Cited by 149
Ultrafine Particle Characteristics in Seven Industrial Plants
Elihn, K., & Berg, P. (2009) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/mep033 · Cited by 78
Hazard identification of inhaled nanomaterials: making use of short-term inhalation studies
Klein, C. L., Wiench, K., Wiemann, M., Ma‐Hock, L., van Ravenzwaay, B., & Landsiedel, R. (2012) · Archives of Toxicology · doi:10.1007/s00204-012-0834-2 · Cited by 76
Metadata
- Authors
- Schneider, T.
- Corresponding author
- Schneider, Thomas
- Venue
- TemaNord
- Publisher
- Nordic Council of Ministers
- Published
- 2007-11-05
- ISSN
- 0908-6692 (ISSN-L)
- OpenAlex
- W2159818282
- Cited by
- 30
- References
- 28
- Citations by year
- 2020: 1 · 2019: 2 · 2018: 1 · 2017: 2 · 2016: 1 · 2015: 3 · 2014: 4 · 2013: 3 · 2012: 2
- FWCI
- 3.76
- Type
- book
- Language
- en
- Open access
- green
- urn.kb.se
- Licence
- other-oa
- Locations
- TemaNord (publishedVersion)
- KTH Publication Database DiVA (KTH Royal Institute of Technology) (submittedVersion, other-oa)
- Topics
- Health Sciences › Medicine › Public Health, Environmental and Occupational Health › Occupational Health and Safety in Workplaces
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Industrial and Mining Safety
- Physical Sciences › Chemical Engineering › Chemical Health and Safety › Chemical Safety and Risk Management
- Keywords
- engineered nanoparticles, occupational exposure, occupational health risk, exposure control, welding fumes, carbon black, safety data sheets, risk assessment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluation and control of occupational health risks from nanoparticles. https://app.cochat.ai/papers/10.6027/tn2007-581
- The paper
- Schneider, T. (2007). Evaluation and control of occupational health risks from nanoparticles. TemaNord. https://doi.org/10.6027/tn2007-581
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
