The DOI matches its Crossref record.
Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes
Open accessAbstract
Additive Manufacturing is increasingly used in the development of new products: from conceptual design to functional parts and tooling.However, today, variability in part quality due to inadequate dimensional tolerances, surface roughness, and defects, limits its broader acceptance for highvalue or mission-critical applications.While process control in general can limit this variability, it is impeded by a lack of adequate process measurement methods.Process control today is based on heuristics and experimental data, yielding limited improvement in part quality.The overall goal is to develop the measurement science 1 necessary to make in-process measurement and real-time control possible in additive manufacturing.Traceable dimensional and thermal metrology methods must be developed for real-time closed-loop control of additive manufacturing processes.As a precursor, this report presents a review on the additive manufacturing control schemes, process measurements, and modeling and simulation methods as it applies to the powder bed fusion process, though results from other processes are reviewed where applicable.The aim of the review is to identify and summarize the measurement science needs that are critical to real-time process control.We organize our research findings to identify the correlations between process parameters, process signatures, and product quality.The intention of this report is to serve as a background reference and a go-to place for our work to identify the most suitable measurement methods and corresponding measurands for real-time control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Powders for powder bed fusion: a review
Vock, S., Klöden, B., Kirchner, A., Weißgärber, T., & Kieback, B. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00078-6 · Cited by 500
Metadata
- Authors
- Mani, M., Lane, B., Donmez, A., Feng, S., Moylan, S., & Fesperman, R.
- Published
- 2015-02
- OpenAlex
- W4245782078
- Cited by
- 242
- References
- 0
- Type
- report
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes. https://app.cochat.ai/papers/10.6028/nist.ir.8036
- The paper
- Mani, M., Lane, B., Donmez, A., Feng, S., Moylan, S., & Fesperman, R. (2015). Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes. https://doi.org/10.6028/nist.ir.8036
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.