The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Powders for powder bed fusion: a review
Open accessAbstract
The quality of powder used in powder bed-based additive manufacturing plays a key role concerning process performance and end part properties. Even though this is a generally accepted fact, there is still a lack of a comprehensive understanding of the powder property–part property relationship. However, numerous investigations focusing on selected powder properties and their corresponding influence on process aspects or final part properties have been published in recent years. Still, generalized statements on powder requirements for a defined process performance are not available. This can be attributed to the fact that the community has not yet come to an agreement which characterization techniques are most suitable for powder characterization in the additive manufacturing context and in most cases only selected aspects have been investigated for special powder materials. The aim of this review is to assess these building blocks of knowledge and to provide an overview on the current state of the art.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2013) · Medical Entomology and Zoology · Cited by 690
Spierings, A. B., Herres, N., & Levy, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124770 · Cited by 614
Characterization of Metal Powders Used for Additive Manufacturing
Slotwinski, J. A., Garboczi, E. J., Stutzman, P. E., Ferraris, C. F., Watson, S. S., & Peltz, M. A. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.018 · Cited by 506
Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y., & Wang, J. (2015) · JOM · doi:10.1007/s11837-015-1300-4 · Cited by 483
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing
Spierings, A. B., Voegtlin, M., Bauer, T., & Wegener, K. (2015) · Progress in Additive Manufacturing · doi:10.1007/s40964-015-0001-4 · Cited by 415
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
Markl, M., & Körner, C. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032158 · Cited by 401
Campbell, I., Diegel, O., Kowen, J., & Wohlers, T. T. (2018) · ResearchSpace (University of Auckland) · Cited by 377
Characterization of powder flowability using measurement of angle of repose
Geldart, D., Abdullah, E. C., Hassanpour, A., Nwoke, L. C., & Wouters, I. M. F. (2006) · 中国颗粒学报:英文版 · doi:10.1016/s1672-2515(07)60247-4 · Cited by 363
Review on testers for measuring flow properties of bulk solids
Schwedes, J. (2003) · Granular Matter · doi:10.1007/s10035-002-0124-4 · Cited by 351
Cited by
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Brika, S. E., Letenneur, M., Dion, C. A., & Brailovski, V. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100929 · Cited by 343
Metadata
- Authors
- Vock, S., Klöden, B., Kirchner, A., Weißgärber, T., & Kieback, B.
- Venue
- Progress in Additive Manufacturing
- Published
- 2019-02-09
- Volume
- 4
- Issue
- 4
- Pages
- 383-397
- ISSN
- 2363-9512 (ISSN-L)
- 2363-9520
- OpenAlex
- W2911861386
- Cited by
- 500
- References
- 36
- FWCI
- 31.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Powders for powder bed fusion: a review. https://app.cochat.ai/papers/10.1007/s40964-019-00078-6
- The paper
- Vock, S., Klöden, B., Kirchner, A., Weißgärber, T., & Kieback, B. (2019). Powders for powder bed fusion: a review. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-019-00078-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.