Introduction to Physical Polymer Science

Cited by (1,001)

Items 901–1,000 of 1,001

1. Blends of ethylene–octene copolymers with different chain architectures – Morphology, thermal and mechanical behavior
   Stefan Hölzer, Matthias Menzel, Qamer Zia, Ulrich S. Schubert, Mario Beiner, Roland Weidisch · 2013 · Polymer
2. Biodegradable and Elastomeric Poly(glycerol sebacate) as a Coating Material for Nitinol Bare Stent
   Min Ji Kim, Moon Young Hwang, Ji‐Heung Kim, Dong June Chung · 2014 · BioMed Research International
3. Preparation and interaction characteristics of exfoliated ABS/organoclay nanocomposite
   Sang‐Kyun Lim, Eunpyo Hong, Yu‐Hyun Song, Bong Jun Park, Hyoung Jin Choi, In-Joo Chin · 2009 · Polymer Engineering and Science
4. Effect of high pressure treatment on the structural, mechanical and rheological properties of glucomannan gels
   Helena M. Moreno, Beatriz Herranz, Antonio Javier BORDERÍAS, Clara A. Tovar · 2016 · Food Hydrocolloids
5. Gamma irradiation effect on the optical properties and refractive index dispersion of dye doped polystyrene films
   Tariq J. Alwan · 2012 · TURKISH JOURNAL OF PHYSICS
6. Glass Transition Explanation for the Effect of Polyhydroxy Compounds on Protein Denaturation in Dehydrated Solids
   Leonard N. Bell, Michael J. Hageman · 1996 · Journal of Food Science
7. Electrospinning Fibers from Oligomeric Complex Coacervates: No Chain Entanglements Needed
   Xiangxi Meng, Yifeng Du, Yalin Liu, Edward Bryan Coughlin, Sarah L. Perry, Jessica D. Schiffman · 2021 · Macromolecules
8. Structure-Property Relationships in Hydrogels
   Assunta Borzacchiello, Luigi Ambrosio · 2009 · Springer eBooks
9. Physico-mechanical properties and thermal stability of thermoset nanocomposites based on styrene-butadiene rubber/phenolic resin blend
   Akbar Shojaei, Morteza Faghihi · 2009 · Materials Science and Engineering A
10. Poly(vinylidene fluoride) Crystallization Behavior and Membrane Structure Formation Via Thermally Induced Phase Separation with Benzophenone Diluent
    Minghao Gu, Jun Zhang, Ying Xia, Xiaolin Wang · 2007 · Journal of Macromolecular Science Part B
11. Effect of well-dispersed surface-modified silica nanoparticles on crystallization behavior of poly (lactic acid) under compressed carbon dioxide
    Kaveh Sarikhani, Rasool Nasseri, Victor Lotocki, R.B. Thompson, Chul B. Park, P. Chen · 2016 · Polymer
12. Hydroxymethyl furfural-modified urea–formaldehyde resin: synthesis and properties
    Naser Esmaeili, Mohammad Jalal Zohuriaan‐Mehr, S. Mohajeri, Kourosh Kabiri, Hossein Bouhendi · 2016 · European Journal of Wood and Wood Products
13. Stiffness of thin, supported polystyrene films: Free-surface, substrate, and confinement effects characterized via self-referencing fluorescence
    Shadid Askar, John M. Torkelson · 2016 · Polymer
14. Electrospun Polyurethane Nanofibers
    Çiğdem Akduman, Emriye Perrin Akçakoca Kumbasar · 2017 · InTech eBooks
15. The degree of crystallinity exhibiting a spatial distribution in polymer films
    Yuhui Yang, Min Chen, Huanbin Li, Hanying Li · 2018 · European Polymer Journal
16. Absorbent–Adsorbates: Large Amphiphilic Janus Microgels as Droplet Stabilizers
    Bobby Haney, Jörg G. Werner, David A. Weitz, Subramanian Ramakrishnan · 2020 · ACS Applied Materials & Interfaces
17. Characterization of gamma irradiated plasticized starch/poly(vinyl alcohol) (PLST/PVA) blends and their application as protected edible materials
    Magdy M. H. Senna, Hussein A. El-Shahat, Abdel Wahab M. El‐Naggar · 2010 · Journal of Polymer Research
18. Electron spin relaxation due to small-angle motion: Theory for the canonical orientations and application to hierarchic cage dynamics in ionomers
    D. Leporini, Volker Schädler, Ulrich B. Wiesner, Hans Wolfgang Spiess, Gunnar Jeschke · 2003 · The Journal of Chemical Physics
19. Structural, sorption and transport characteristics of an ultrapermeable polymer
    Xiaoyan Wang, Anita J. Hill, Benny D. Freeman, Isaac C. Sánchez · 2008 · Journal of Membrane Science
20. Compared abilities of filled and unfilled natural rubbers to crystallize in a large strain rate domain
    Nicolas Candau, Laurent Chazeau, Jean‐Marc Chenal, Catherine Gauthier, Étienne Munch · 2015 · Composites Science and Technology
21. Polymer–polymer interactions in dextran systems using thermal analysis
    Didem Z. Icoz, Carmen I. Moraru, Jozef L. Kokini · 2005 · Carbohydrate Polymers
22. Surface Energetics Evolution during Processing of Epoxy Resins
    S. A. Page, Raffaele Mezzenga, L. Boogh, John C. Berg, Jan‐Anders E. Månson · 2000 · Journal of Colloid and Interface Science
23. Analysis of the rubber elasticity of polyethylene networks based on the slip link model of S. F. Edwards et al.☆
    Michael G. Brereton, Philip G. Klein · 1988 · Polymer
24. Introduction to phase transitions
    Yrjö Henrik Roos, Stephan Drusch · 2015 · Elsevier eBooks
25. Viscoelastic behavior of PMMA in relation to deformation mode
    Daniela Gheorghiu Ionita, Mariana Cristea, Dorel Banabic · 2015 · Journal of Thermal Analysis and Calorimetry
26. Hydrogel microstructures combined with electrospun fibers and photopatterning for shape and modulus control
    Kyle Anderson, David Lu, Michael E. McConney, Tao Han, Darrell H. Reneker, Vladimir V. Tsukruk · 2008 · Polymer
27. New polyvinyl chloride/thermoplastic polyurethane membranes with potential application in nanofiltration
    Zahra Maghsoud, Mojgan Pakbaz, Mohammad Hossein Navid Famili, Seyed Siavash Madaeni · 2017 · Journal of Membrane Science
28. Bio‐based blends from poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) and natural rubber for packaging applications
    Xiaoying Zhao, Varun Venoor, Kurt W. Koelling, Katrina Cornish, Yael Vodovotz · 2018 · Journal of Applied Polymer Science
29. Quantification of ligand surface concentration of bulk-modified biomimetic hydrogels
    Esfandiar Behravesh, Vassilios I. Sikavitsas, Antonios G. Mikos · 2003 · Biomaterials
30. Influence of phenoxy-terminated short-chain pendant groups on gas transport properties of cross-linked poly(ethylene oxide) copolymers
    Victor A. Kusuma, Scott T. Matteucci, Benny D. Freeman, Michael K. Danquah, Douglass S. Kalika · 2009 · Journal of Membrane Science
31. Control of the block copolymer morphology in templated epoxy thermosets
    Theresa J. Hermel, Houxiang Tang, Daniel J. Murray, Stephen F. Hahn · 2007 · Journal of Polymer Science Part B Polymer Physics
32. Micromechanical modeling of the elastic behavior of polypropylene based organoclay nanocomposites under a wide range of temperatures and strain rates/frequencies
    Kui Wang, S. Ahzi, Rodrigue Matadi Boumbimba, Nadia Bahlouli, Frédéric Addiego, Yves Rémond · 2013 · Mechanics of Materials
33. Near-surface crystallization of PET
    Kei Shinotsuka, Valery N. Bliznyuk, Hazel E. Assender · 2012 · Polymer
34. Properties of sugar-based low-melting mixtures
    Veronika Fischer, Werner Kunz · 2014 · Molecular Physics
35. A positron annihilation lifetime spectroscopic study of the corrosion protective properties of epoxy coatings
    Richard C. Macqueen, Richard D. Granata · 1996 · Progress in Organic Coatings
36. Effect Of UV Rays On Degradation And Stability Of High Performance Polymer Membranes
    Omkar Singh Kushwaha, Chilukuri Ver Avadhani, Ravi Prakash Singh · 2014 · Advanced Materials Letters
37. Sustainable poly(ε-decalactone)−poly(l-lactide) multiarm star copolymer architectures for thermoplastic elastomers with fixed molar mass and block ratio
    Sangjun Lee, Kyungchan Lee, Jeongmin Jang, Ji Sun Choung, Woo Jin Choi, Geon-Joong Kim, Young‐Wun Kim, Jihoon Shin · 2017 · Polymer
38. Nanowear of polystyrene surfaces: molecular entanglement and bundle formation
    Franco Dinelli, Graham J. Leggett, Philip Howard Shipway · 2005 · Nanotechnology
39. Theory of glassy dynamics in conformationally anisotropic polymer systems
    Folusho T. Oyerokun, Kenneth S. Schweizer · 2005 · The Journal of Chemical Physics
40. Longer-scale segmental dynamics of amorphous poly(ethylene oxide)/poly(vinyl acetate) blends in the softening dispersion
    Xuebang Wu, Huaguang Wang, C.S. Liu, Zhen‐Gang Zhu · 2010 · Soft Matter
41. The use of plastic optical fibers in photocatalysis of trichloroethylene
    Hyunku Joo, Hee-Rok Jeong, Myung-Seok Jeon, Il Moon · 2002 · Solar Energy Materials and Solar Cells
42. Preparation, melting, glass relaxation and nonisothermal crystallization kinetics of a novel dendritic nylon-11
    Jintao Wan, Zhiyang Bu, Cheng Li, Hong Fan, Bo‐Geng Li · 2011 · Thermochimica Acta
43. Thermomechanical analysis of hyperelastic thick-walled cylindrical pressure vessels, analytical solutions and FEM
    Akbar Almasi, Mostafa Baghani, Ali Moallemi · 2017 · International Journal of Mechanical Sciences
44. Roles of kink on the thermal transport in single polyethylene chains
    Xuhui Duan, Zehuan Li, Jùn Líu, Gang Chen, Xiaobo Li · 2019 · Journal of Applied Physics
45. Thermal insulation behavior of functionally graded aerogel: The role of novolac molecular-weight
    Mina Noroozi, Mahyar Panahi‐Sarmad, Ahmad Reza Bahramian · 2019 · Polymer
46. Bio-oil-based phenol–formaldehyde resin: comparison of weight- and molar-based substitution of phenol with bio-oil
    Yusuf Celikbag, Md. Nuruddin, Manik Chandra Biswas, Osei Asafu‐Adjaye, Brian K. Via · 2020 · Journal of Adhesion Science and Technology
47. Cyclometalated Platinum(II) Complexes Simultaneously Catalyze the Cross-Linking of Polysiloxanes and Function as Luminophores
    Mikhail V. Dobrynin, Elina V. Sokolova, Mikhail A. Kinzhalov, Andrey S. Smirnov, Галина Л. Старова, Vadim Yu. Kukushkin, Regina Maratovna Islamova · 2021 · ACS Applied Polymer Materials
48. Extrusion of Polymer Blend Electrolytes for Solid-State Lithium Batteries: A Study of Polar Functional Groups
    Léa Caradant, Nina Verdier, Gabrielle Y. Foran, David Lepage, Arnaud Prébé, David Aymé‐Perrot, Mickaël Dollé · 2021 · ACS Applied Polymer Materials
49. Investigation of sorption properties and pervaporation behaviors under different operating conditions for trimesoyl chloride-crosslinked PVA membranes
    S XIAO, Xiao Feng, Rongfu Huang · 2007 · Journal of Membrane Science
50. Influence of polymer modulus on the percolation threshold of latex-based composites
    Yeon Seok Kim, John B. Wright, Jaime C. Grunlan · 2007 · Polymer
51. Porosity Reduction in the High-Speed Processing of Glass-Fiber Composites by Resin Transfer Molding (RTM)
    Harry J. Barraza, Youssef K. Hamidib, Levent Aktasb, Edgar A. O’Rear, M. Cengiz Altan · 2004 · Journal of Composite Materials
52. Structure-property relations of poly(propylene oxide) block copolymers with monodisperse and polydisperse crystallisable segments
    Martijn van der Schuur, Jan de Boer, Reinoud J. Gaymans · 2005 · Polymer
53. Hybrid organic-inorganic 6FDA-6pFDA and multi-block 6FDA-DABA polyimide SiO2–TiO2 nanocomposites: Synthesis, FFV, FTIR, swelling, stability, and X-ray scattering
    Fei Huang, Armin Tahmasbi Rad, Wenjian Zheng, Mu‐Ping Nieh, Chris J. Cornelius · 2016 · Polymer
54. Photopolymers in orthopedics: characterization of novel crosslinked polyanhydrides
    Jennifer S. Young, Kelly D. Gonzales, Kristi S. Anseth · 2000 · Biomaterials
55. Multiphase structure of segmented polyurethanes: Its relation with spherulite structure
    Yingjie Li, Jian Liu, Huichang Yang, Dezhu Ma, Benjamin Chu · 1993 · Journal of Polymer Science Part B Polymer Physics
56. Elastic behavior of flexible polyether(urethane–urea) foam materials
    Martijn van der Schuur, Evert van der Heide, Jan Feijén, Reinoud J. Gaymans · 2004 · Polymer
57. The kinetics of cure and network formation
    B. Ellis · 1993 · Springer eBooks
58. Viscoelastic Behavior of Laminated Composite Materials
    David Dillard · 1991 · Composite materials series
59. Simultaneous measurements of small angle x-ray scattering, wide angle x-ray scattering, and light scattering during phase transitions in polymers (invited)
    Christoph Wutz, M. Bark, Jens Cronauer, Ralph Döhrmann, Hans Gerhard Zachmann · 1995 · Review of Scientific Instruments
60. Amide modified polybutylene terephthalate: structure and properties
    A.C.M. van Bennekom, Reinoud J. Gaymans · 1997 · Polymer
61. Manufacturing of Poly(vinylidene fluoride) and Evaluation of its Mechanical Properties
    Daniel Mason Esterly · 2002 · VTechWorks (Virginia Tech)
62. A fast and effective procedure for the optical efficiency determination of luminescent solar concentrators
    Marco Carlotti, Elisabetta Fanizza, Annamaria Panniello, Andrea Pucci · 2015 · Solar Energy
63. Study of Temperature and UV Wavelength Range Effects on Degradation of Photo-Irradiated Polyethylene Films Using DMA
    Paul Kuria Kamweru, F. G. Ndiritu, Thomas Karanja Kinyanjui, Zipporah Wanjiku Muthui, Richard G. Ngumbu, Peter M. Odhiambo · 2011 · Journal of Macromolecular Science Part B
64. Montmorillonite nanoclay filler effects on electrical conductivity, thermal and mechanical properties of epoxy‐based nanocomposites
    Rashmi Rashmi, Nijagal Marulaiah Renukappa, Chikkakuntappa Ranganathaiah, N. Shivakumar Kunigal · 2011 · Polymer Engineering and Science
65. The effect of acrylamide incorporation on the thermal and physical properties of denture resins
    Elif Aydoğan Ayaz, Rukiye Kaplan Durkan, Bora Bağış · 2013 · The Journal of Advanced Prosthodontics
66. Hybrid ZnO:polystyrene nanocomposite for all‐polymer photonic crystals
    Paola Lova, Giovanni Manfredi, Luca Boarino, Michele Laus, Giulia Urbinati, Tonia Losco, F. Marabelli, Valentina Caratto, Maurizio Ferretti, Maila Castellano et al. · 2014 · Physica status solidi. C, Conferences and critical reviews/Physica status solidi. C, Current topics in solid state physics
67. Cost-effective solar concentrators based on red fluorescent Zn( ii )–salicylaldiminato complex
    Pierpaolo Minei, Elisabetta Fanizza, Antonio M. Rodríguez, Ana Belen Muñoz-García, Paola Cimino, Michele Pavone, Andrea Pucci · 2016 · RSC Advances
68. Reinforced chloroprene rubber by in situ generated silica particles: Evidence of bound rubber on the silica surface
    Bharat P. Kapgate, Chayan Das, Amit Das, Debdipta Basu, Sven Wießner, Uta Reuter, Gert Heinrich · 2016 · Journal of Applied Polymer Science
69. A correlation between structural features of an amphiphilic diblock copolymer in solution and the structure of the porous surface in an integral asymmetric membrane
    Sofia Dami, Clarissa Abetz, Birgit Fischer, Maryam Radjabian, Prokopios Georgopanos, Volker Abetz · 2017 · Polymer
70. Controllable Crystallization Behavior of Nylon-6/66 Copolymers Based on Regulating Sequence Distribution
    Jie Tang, Bowen Xu, Zhenhao Xi, Xun Pan, Ling Zhao · 2018 · Industrial & Engineering Chemistry Research
71. Thermal behaviour and fungi resistance of composites based on wood and natural and synthetic epoxy resins cured with maleopimaric acid
    Liliana Roşu, Fanica R. Mustata, Cristian–Dragos Varganici, Dan Roşu, Teodora Rusu, Irina Roșca · 2018 · Polymer Degradation and Stability
72. Durability of wet lay-up FRP bonded to concrete with nanomodified epoxy adhesives
    Syed Ahnaf Morshed, Tyler J. Young, William M. Chirdon, Qian Zhang, Jovan Tatar · 2018 · The Journal of Adhesion
73. Thermal buckling and postbuckling behavior of FG-GRC laminated cylindrical shells with temperature-dependent material properties
    Hui‐Shen Shen, Y. Xiang · 2019 · Meccanica
74. Local dynamics within the glass transition domain
    François Godey, Alexandre Fleury, Armand Soldera · 2019 · Scientific Reports
75. Mechanistic insight of the formation of visible-light responsive nanosheet graphitic carbon nitride embedded polyacrylonitrile nanofibres for wastewater treatment
    Nur Hashimah Alias, Juhana Jaafar, Sadaki Samitsu, Ahmad Fauzi Ismail, Mohamad Azuwa Mohamed, Mohd Hafiz Dzarfan Othman, Mukhlis A. Rahman, Nur Hidayati Othman, Nor Azureen Mohamad Nor, Norhaniza Binti Yusof et al. · 2019 · Journal of Water Process Engineering
76. Modeling the modulus of bitumen/SBS composite at different temperatures based on kinetic models
    Chuanqi Yan, Quan Lv, Allen A. Zhang, Changfa Ai, Weidong Huang, Dongya Ren · 2021 · Composites Science and Technology
77. Poly(anhydride‐ester) fibers: Role of copolymer composition on hydrolytic degradation and mechanical properties
    Kenya Whitaker‐Brothers, Kathryn E. Uhrich · 2004 · Journal of Biomedical Materials Research Part A
78. Dynamic mechanical properties of flaxseed gum based edible films
    Yong Wang, Dong Li, Li-jun Wang, Yang Liu, Necati Özkan · 2011 · Carbohydrate Polymers
79. Morphing wing structure with controllable twist based on adaptive bending–twist coupling
    Wolfram Raither, Matthias Heymanns, Andrea Bergamini, Paolo Ermanni · 2013 · Smart Materials and Structures
80. Rheological and calorimetric properties of recycled bisphenol A poly(carbonate)
    Jean‐François Feller, Alain Bourmaud · 2003 · Polymer Degradation and Stability
81. Polycrystalline patterns in far-from-equilibrium freezing: a phase field study
    László Gránásy, Tamás Pusztai, Tamás Börzsönyi, Gyula I. Tóth, György Tegze, James A. Warren, Jack F. Douglas · 2006 · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics
82. Gelation of a new hydrogel system of atactic ‐poly(vinyl alcohol)/NaCl/H 2 O
    Lixing Dai, Kohshuke Ukai, Sharif Mohammad Shaheen, Kazuo Yamaura · 2002 · Polymer International
83. Bonding metals to poly(methyl methacrylate) using aryldiazonium salts
    Omar Alageel, Mohamed‐Nur Abdallah, Zhong Yuan Luo, Jaime Del-Rio-Highsmith, Marta Cerruti, Faleh Tamimi · 2014 · Dental Materials
84. An Investigation on Gas Transport Properties of Cross-Linked Poly(ethylene glycol diacrylate) (XLPEGDA) and XLPEGDA/TiO2 Membranes with a Focus on CO2 Separation
    Ali Ghadimi, Somayeh Norouzbahari, Vahid Vatanpour, Fereidoon Mohammadi · 2018 · Energy & Fuels
85. Polymers of 1-Vinyl-2-Pyrrolidinone as Potential Vitreous Substitutes: Physical Selection
    Ye Hong, Traian V. Chirilă, Maximiliaan J. H. Cuypers, Ian Jeffery Constable · 1996 · Journal of Biomaterials Applications
86. Compatibilizing effects of block copolymer mixed with immiscible polymer blends by solid-state shear pulverization: stabilizing the dispersed phase to static coarsening
    Ying Tao, Andrew H. Lebovitz, John M. Torkelson · 2005 · Polymer
87. Synthesis, Physicochemical Characterization, and Applications of Polyurethane Ionomers: A Review
    S. Ramesh, K. Tharanikkarasu, Gopalasamudram Narayanan Mahesh, Ganga Radhakrishnan · 1998 · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics
88. Composite membranes for hydrophobic pervaporation: study with the toluene–water system
    Suggala Venkata Satyanarayana, Ashutosh Sharma, Paramita Bhattacharya · 2004 · Chemical Engineering Journal
89. Release characteristics of reattached barnacles to non-toxic silicone coatings
    Jong-Soo Kim, Erin Nyren-Erickson, Shane J. Stafslien, Justin W. Daniels, James A. Bahr, Bret J. Chisholm · 2008 · Biofouling
90. Structure and properties of bread dough and crumb
    Alberto Schiraldi, Laura Piazza, Oreste Vittore Brenna, Elena Vittadini · 1996 · Journal of Thermal Analysis and Calorimetry
91. Bilayer, nanoimprint lithography
    Brian O. Faircloth, Henry W. Rohrs, Richard C. Tiberio, Rodney S. Ruoff, Robert R. Krchnavek · 2000 · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena
92. Synthesis, structures and properties of hydrophobic Alkyltrimethoxysilane-Polyvinyltrimethoxysilane hybrid aerogels with different alkyl chain lengths
    Maryam Fashandi, Solmaz Karamikamkar, Siu Ning Leung, Hani E. Naguib, Jiang Hong, Bingqing Liang, Chul B. Park · 2021 · Journal of Colloid and Interface Science
93. Stretchable, Healable, and Weldable Vitrimer Ionogel for Ionotronic Applications
    Khoa Bui, Giao T. M. Nguyen, Cédric Vancaeyzeele, Frédéric Vidal, Xiao Hu, Chaoying Wan, Cédric Plesse · 2023 · Chemical Engineering Journal
94. Chain packing versus chain mobility in semialiphatic BTDA-based copolyimides
    Mariana Cristea, Daniela Gheorghiu Ionita, Camelia Hulubei, Daniel Ilie Timpu, Dumitru Popovici, Bogdan C. Simionescu · 2011 · Polymer
95. Microstructure Development, Wear Characteristics and Kinetics of Thermal Decomposition of Hybrid Nanocomposites Based on Poly Aryl Ether Ketone, Boron Carbide and Multi Walled Carbon Nanotubes
    Manu Remanan, Murugasamy Kannan, Rebbapragada Subba Rao, Shantanu Bhowmik, Lalit Varshney, Mathew Abraham, Karingamanna Jayanarayanan · 2017 · Journal of Inorganic and Organometallic Polymers and Materials
96. Structure and dynamics of stereo-regular poly(methyl-methacrylate) melts through atomistic molecular dynamics simulations
    Alireza Foroozani Behbahani, S. Mehdi Vaez Allaei, Ghodratollah Hashemi Motlagh, Hossein Eslami, Vagelis Harmandaris · 2018 · Soft Matter
97. Highly Sensitive Soft Foam Sensors to Empower Robotic Systems
    Vítor Sencadas, Charbel Tawk, Gürsel Alıcı · 2019 · Advanced Materials Technologies
98. Comparison of two starch-based flocculants with polyacrylamide for the simultaneous removal of phosphorus and turbidity from simulated and actual wastewater samples in combination with FeCl3
    Pan Hu, Jie Ren, Xinyu Hu, Hu Yang · 2020 · International Journal of Biological Macromolecules
99. Polygrammar: Grammar for Digital Polymer Representation and Generation
    Minghao Guo, Wan Shou, Liane Makatura, Timothy Erps, Michael Foshey, Wojciech Matusik · 2022 · Advanced Science
100. X-ray scattering in polymers and micelles
     Fairclough, J.P.A., Hamley, I.W., Terrill, N.J. · 1999 · Radiation Physics and Chemistry