Cited by 2,917Polymer crystallization and propertiesRheology and Fluid Dynamics StudiesMaterial Dynamics and Properties

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Introduction to Physical Polymer Science

Sperling, L.H.·2005·Wiley eBooks

Open this paper in CoChat — free account

Abstract

Chain Structure and Configuration. Molecular Weights and Sizes. Concentrated Solutions and Phase Separation Behavior. The Amorphous State. The Crystalline State. Polymers in the Liquid Crystalline State. Glass-Rubber Transition Behavior. Cross-Linked Polymers and Rubber Elasticity. Polymer Viscoelasticity and Rheology. Mechanical Behavior of Polymers. Modern Topics. Index.

Integrity signals

Registry

Crossref · 10.1002/0471757128

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Polymer Photophysics and Photochemistry
Guillet (1985) · Cited by 353
Polymer Conformation and Configuration
(1969) · Elsevier eBooks · doi:10.1016/c2013-0-11971-x · Cited by 154
Introduction to Polymer Spectroscopy
Klöpffer, W. (1984) · Springer eBooks · doi:10.1007/978-3-642-69373-1 · Cited by 112
Static and Dynamic Properties of the Polymeric Solid State
Pethrick, R. A., & Richards, R. W. (1982) · Springer eBooks · doi:10.1007/978-94-009-7915-4 · Cited by 68

Flagged first, then by citations

Show all 4 references

Sorted by citations

Items 501–600 of 1,001

De-consolidation and re-consolidation in CF/PPS thermoplastic matrix composites
Ye, L., Chen, Z., Lu, M., & Hou, M. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.12.006 · Cited by 71
Photocatalytic degradation of oilfield produced water using graphitic carbon nitride embedded in electrospun polyacrylonitrile nanofibers
Alias, N. H., Jaafar, J., Samitsu, S., Yusof, N. B., Othman, M. H. D., Rahman, M. A., Ismail, A. F., Aziz, F., Salleh, W. N. W., & Othman, N. H. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.04.033 · Cited by 70
Plantago major seed gum based biodegradable films: Effects of various plant oils on microstructure and physicochemical properties of emulsified films
Niknam, R., Ghanbarzadeh, B., Ayaseh, A., & Hamishehkar, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.04.015 · Cited by 70
Functional bioengineering copolymers. II. Synthesis and characterization of amphiphilic poly(N-isopropyl acrylamide-co-maleic anhydride) and its macrobranched derivatives
Kesim, H., Rzaev, Z. M. O., Dinçer, S., & Pişkın, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00177-0 · Cited by 70
HDPE/LLDPE reactor blends with bimodal microstructures—part I: mechanical properties
Shan, C. L. P., Soares, J. B. P., & Penlidis, A. (2002) · Polymer · doi:10.1016/s0032-3861(02)00703-6 · Cited by 70
Functionalizing maize zein in viscoelastic dough systems through fibrous, β-sheet-rich protein networks: An alternative, physicochemical approach to gluten-free breadmaking
Erickson, D. P., Campanella, O. H., & Hamaker, B. R. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.10.008 · Cited by 71
Naturally functionalized triglyceride oils in interpenetrating polymer networks
Barrett, L. W., Sperling, L. H., & Murphy, C. J. (1993) · Journal of the American Oil Chemists Society · doi:10.1007/bf02542588 · Cited by 70
Self-citation
Elastomer Nanocomposites Based on NR/EPDM/Organoclay: Morphology and Properties
Alipour, A., Naderi, G., Bakhshandeh, G. R., Vali, H., & Shokoohi, S. (2011) · International Polymer Processing · doi:10.3139/217.2381 · Cited by 70
Properties of PET/clay nanocomposite films
Ghasemi, H., Carreau, P. J., Kamal, M. R., & Tabatabaei, S. H. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22099 · Cited by 70
Influence of Solvent on the Structure of an Amphiphilic Block Copolymer in Solution and in Formation of an Integral Asymmetric Membrane
Radjabian, M., Abetz, C., Fischer, B., Meyer, A., & Abetz, V. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15199 · Cited by 70
The functional properties and application of gelatin derived from the skin of channel catfish (Ictalurus punctatus)
Duan, R., Zhang, J., Liu, L., Cui, W., & Regenstein, J. M. (2017) · Food Chemistry · doi:10.1016/j.foodchem.2017.06.145 · Cited by 70
Chemical stability of peptides in polymers. 1. Effect of water on peptide deamidation in poly(vinyl alcohol) and poly(vinyl pyrrolidone) matrixes
Lai, M. C., Hageman, M. J., Schowen, R. L., Borchardt, R. T., & Topp, E. M. (1999) · Journal of Pharmaceutical Sciences · doi:10.1021/js980227g · Cited by 70
Welding and reprocessing of disulfide‐containing thermoset epoxy resin exhibiting behavior reminiscent of a thermoplastic
Memon, H., & Wei, Y. Z. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49541 · Cited by 69
High pressure applied to frozen flying fish (Parexocoetus brachyterus) surimi: Effect on physicochemical and rheological properties of gels
Moreno, H. M., Bargiela, V., Tovar, C. A., Cando, D., BORDERÍAS, A. J., & Herranz, B. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.01.029 · Cited by 69
Reduced Migration from Flexible Poly(vinyl chloride) of a Plasticizer Containing β-Cyclodextrin Derivative
Yu, B. Y., Chung, J. W., & Kwak, S. (2008) · Environmental Science & Technology · doi:10.1021/es800895x · Cited by 69
Solvent effects on jet evolution during electrospinning of semi-dilute polystyrene solutions
Eda, G., Liu, J., & Shivkumar, S. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.01.003 · Cited by 69
Development of Force Field Parameters for Molecular Simulation of Polylactide
McAliley, J. H., & Bruce, D. A. (2011) · Journal of Chemical Theory and Computation · doi:10.1021/ct200251x · Cited by 70
Diffusion of liquids in polymers
Vesely, D. (2008) · International Materials Reviews · doi:10.1179/174328008x324602 · Cited by 69
Bioenabled Surface‐Mediated Growth of Titania Nanoparticles
Kharlampieva, E., Tsukruk, T., Slocik, J. M., Ko, H., Poulsen, N., Naik, R. R., Kröger, N., & Tsukruk, V. V. (2008) · Advanced Materials · doi:10.1002/adma.200800054 · Cited by 69
Real‐time orientation and crystallinity measurements during the isotactic polypropylene film‐casting process
Lamberti, G., & Brucato, V. (2003) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10411 · Cited by 69
On the Steady-State Temperature Rise During Laser Heating of Multilayer Thin Films in Optical Pump–Probe Techniques
Braun, J. L., Szwejkowski, C. J., Giri, A., & Hopkins, P. E. (2017) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4038713 · Cited by 69
Static and dynamic mode I fracture toughness of rigid PUR foams under room and cryogenic temperatures
Linul, E., Marșavina, L., Vălean, C., & Bănică, R. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2018.12.007 · Cited by 69
2D reentrant micro-honeycomb structure of graphene-CNT in polyurethane: High stretchability, superior electrical/thermal conductivity, and improved shape memory properties
Kang, S., Kang, T., Kim, B. S., Oh, J., Park, S., Choi, I. S., Lee, J., & Son, J. G. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.004 · Cited by 69
Thermal, mechanical and microstructural characterization and antioxidant potential of Rhinobatos cemiculus gelatin films supplemented by titanium dioxide doped silver nanoparticles
Boughriba, S., Souissi, N., Jridi, M., Li, S., & Nasri, M. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105695 · Cited by 69
Glass Transition Temperatures Determined using a Temperature‐Cycling Differential Scanning Calorimeter
Bell, L. N., & TOUMA, D. E. (1996) · Journal of Food Science · doi:10.1111/j.1365-2621.1996.tb12207.x · Cited by 69
Influence of chemical structure of short chain pendant groups on gas transport properties of cross-linked poly(ethylene oxide) copolymers
Kusuma, V. A., Freeman, B. D., Borns, M. A., & Kalika, D. S. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.11.022 · Cited by 69
Investigation of crystalline structure of plasticized poly (lactic acid)/Banana nanofibers composites
Farid, T., Herrera, V. N., & Oksman, K. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/369/1/012031 · Cited by 68
Tailoring highly branched poly(β-amino ester)s: a synthetic platform for epidermal gene therapy
Huang, J.-Y., Gao, Y., Cutlar, L., Ahern, J. O., Zhao, T., Lin, F., Zhou, D., McMahon, S., Greiser, U., Wang, W., et al. (2015) · Chemical Communications · doi:10.1039/c5cc02193f · Cited by 68
New Insight into Time-Temperature Correlation for Polymer Relaxations Ranging from Secondary Relaxation to Terminal Flow: Application of a Universal and Developed WLF Equation
Shangguan, Y., Chen, F., Jia, E., Lin, Y., Hu, J., & Zheng, Q. (2017) · Polymers · doi:10.3390/polym9110567 · Cited by 69
A review of low density porous materials used in laser plasma experiments
Nagai, K., Musgrave, C. S. A., & Nazarov, W. (2018) · Physics of Plasmas · doi:10.1063/1.5009689 · Cited by 67
Characterisation of crystallinity at the interface of ultrasonically welded carbon fibre PPS joints
Koutras, N., Amirdine, J., Boyard, N., Villegas, I. F., & Benedictus, R. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105574 · Cited by 67
Thermoformable and recyclable CFRP pultruded profile manufactured from an epoxy vitrimer
Aranberri, I., Landa, M., Elorza, E., Salaberria, A. M., & Rekondo, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106931 · Cited by 67
Cross-linked polyurethane with dynamic phenol-carbamate bonds: properties affected by the chemical structure of isocyanate
Shi, J., Zheng, T., Zhang, Y., Guo, B., & Xu, J. (2021) · Polymer Chemistry · doi:10.1039/d1py00157d · Cited by 67
Polymer Features in Crystallization
Hu, W. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2710-8 · Cited by 70
Glass transition relaxation and fragility in two room temperature ionic liquids
Ramos, J. J. M., Afonso, C. A. M., & Branco, L. C. (2003) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1022884716750 · Cited by 67
Cure kinetics and chemorheology of EPDM/graphene oxide nanocomposites
Allahbakhsh, A., Mazinani, S., Kalaee, M., & Sharif, F. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.04.010 · Cited by 68
Synthetic 6FDA–ODA copolyimide membranes for gas separation and pervaporation: Functional groups and separation properties
Xiao, S., Huang, R. Y. M., & Feng, X. (2007) · Polymer · doi:10.1016/j.polymer.2007.07.010 · Cited by 67
Biomimetic poly(lactide) based fibrous scaffolds for ligament tissue engineering
Surrao, D. C., Waldman, S. D., & Amsden, B. G. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.012 · Cited by 68
Mechanical and Thermal Properties of Bamboo Microfibril Reinforced Polyhydroxybutyrate Biocomposites
Krishnaprasad, R., Veena, N. R., Maria, H. J., Rajan, R., Skrifvars, M., & Joseph, K. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0127-x · Cited by 67
Phase-Separated Thiol–Epoxy–Acrylate Hybrid Polymer Networks with Controlled Cross-Link Density Synthesized by Simultaneous Thiol–Acrylate and Thiol–Epoxy Click Reactions
Jin, K., Wilmot, N., Heath, W. H., & Torkelson, J. M. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00141 · Cited by 70
Double network shape memory hydrogels activated by near-infrared with high mechanical toughness, nontoxicity, and 3D printability
Dai, W., Guo, H., Gao, B., Ruan, M., Xu, L., Wu, J., Kirk, T. B., Xu, J., Ma, D., & Xue, W. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.078 · Cited by 67
Fabrication and characterization of hybrid sodium montmorillonite/TiO2 reinforced cross-linked wheat starch-based nanocomposites
Yousefi, A., Savadkoohi, B., Zahedi, Y., Hatami, M., & Ako, K. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.083 · Cited by 67
Synthesis and properties of new ferrocene-modified urethane block copolymers
Najafi-Mohajeri, N., Nelson, G. L., & Benrashid, R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000624)76:13 · Cited by 23
Morphological differences in semicrystalline polymers: Implications for local dynamics and chain diffusion
Yao, Y.-F., Graf, R., Spiess, H. W., Lippits, D. R., & Rastogi, S. (2007) · Physical Review E · doi:10.1103/physreve.76.060801 · Cited by 66
Open Cell Microcellular Foams of Polylactic Acid (PLA)‐based Blends with Semi‐Interpenetrating Polymer Networks
Kohlhoff, D., & Ohshima, M. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000371 · Cited by 66
Correlating synthesis parameters with physicochemical properties of poly(glycerol sebacate)
Conejero-García, Á., Gimeno, H. R., Sáez, Y. M., Vilariño‐Feltrer, G., Ortuño‐Lizarán, I., & Vallés‐Lluch, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.01.001 · Cited by 66
Dimensional crossover of heat conduction in amorphous polyimide nanofibers
Dong, L., Xi, Q., Chen, D., Guo, J., Nakayama, T., Li, Y., Liang, Z., Zhou, J., Xu, X., & Li, B. (2018) · National Science Review · doi:10.1093/nsr/nwy004 · Cited by 66
Novel multicomponent silicate–poly(vinyl alcohol) hybrids with controlled reactivity
Pereira, A. P. V., Vasconcelos, W. L., & Oréfice, R. L. (2000) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(00)00166-6 · Cited by 66
A new approach to fabricate polypropylene alloy with excellent low-temperature toughness and balanced toughness-rigidity through unmatched thermal expansion coefficients between components
Shangguan, Y., Chen, F., Yang, J., Jia, E., & Zheng, Q. (2017) · Polymer · doi:10.1016/j.polymer.2017.02.022 · Cited by 65
Sugar Reduction in Dairy Food: An Overview with Flavoured Milk as an Example
Mahato, D. K., Keast, R., Liem, D. G., Russell, C. G., Cicerale, S., & Gamlath, S. (2020) · Foods · doi:10.3390/foods9101400 · Cited by 76
Diffusion in Polymer Solids and Solutions
Mohammad, K. (2011) · InTech eBooks · doi:10.5772/23436 · Cited by 65
The effect of microstructure on the rate-dependent stress–strain behavior of poly(urethane urea) elastomers
Sarva, S. S., & Hsieh, A. J. (2009) · Polymer · doi:10.1016/j.polymer.2009.04.025 · Cited by 65
Preparation of iPP hollow-fiber microporous membranes via thermally induced phase separation with co-solvents of DBP and DOP
Yang, Z., Li, P., Xie, L., Wang, Z., & Wang, S. (2006) · Desalination · doi:10.1016/j.desal.2005.10.016 · Cited by 65
Shrinkage stress in light-cured composite resins: Influence of material and photoactivation mode
Charton, C., Colon, P., & Pla, F. (2006) · Dental Materials · doi:10.1016/j.dental.2006.06.034 · Cited by 65
Hydrogels based on chemically modified poly(vinyl alcohol) (PVA-GMA) and PVA-GMA/chondroitin sulfate: Preparation and characterization
Crispim, E. G., Piai, J. F., Fajardo, A. R., Ramos, É. R. F., Ueda‐Nakamura, T., Nakamura, C. V., Rubira, A. F., & Muniz, E. C. (2012) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2012.41 · Cited by 65
Evaluation of starch-based flocculants for the flocculation of dissolved organic matter from textile dyeing secondary wastewater
Wu, H., Liu, Z., Li, A., & Yang, H. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.01.120 · Cited by 65
An initial comparison of the interactions of Type I and III kerogens with organic liquids
Larsen, J. W., & Li, S. (1997) · Organic Geochemistry · doi:10.1016/s0146-6380(97)00016-8 · Cited by 65
Experimentally Determined Hansen Solubility Parameters of Biobased and Biodegradable Polyesters
Patel, K. G., Maynard, R. K., Ferguson, L. S., Broich, M. L., Bledsoe, J. C., Wood, C. C., Crane, G. H., Bramhall, J. A., Rust, J. M., Williams-Rhaesa, A. M., et al. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c07284 · Cited by 64
Kinetic study of a phenolic-novolac resin curing process by rheological and DSC analysis
Domínguez, J. C., Alonso, M. V., Oliet, M., Rojo, E., & Rodrı́guez, F. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.09.010 · Cited by 64
Low temperature thermal properties of Nafion 117 membranes in water and methanol-water mixtures
Corti, H. R., Pondal, F. N., & Buera, M. D. P. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.005 · Cited by 63
Investigation of novel polyurethane elastomeric networks based on polybutadiene-ol/polypropyleneoxide mixture and their structure–properties relationship
Amrollahi, M., Sadeghi, G. M. M., & Kashcooli, Y. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.02.039 · Cited by 64
AC conductivity and dielectric constant of poly(vinyl alcohol) doped with MnSO 4
Mohamed, R. I. (2000) · Journal of Physics and Chemistry of Solids · doi:10.1016/s0022-3697(99)00390-x · Cited by 64
Quantitative Effect of Elastomeric Modification on Binder Performance at Intermediate and High Temperatures
Elseifi, M. A., Flintsch, G. W., & Al‐Qadi, I. L. (2003) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2003)15:1(32 · Cited by 64
Reprocessing of artificial UV-weathered wood flour reinforced polypropylene composites
Soccalingame, L., Perrin, D., Bénézet, J., Mani, S., Coiffier, F., Richaud, E., & Bergeret, A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.07.013 · Cited by 64
Sorption and diffusion of methyl substituted benzenes through cross-linked nitrile rubber/poly(ethylene co-vinyl acetate) blend membranes
Joseph, A., Mathai, A. E., & Thomas, S. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(03)00175-3 · Cited by 63
Kinetics of thermal degradation of poly(vinyl chloride)
Krongauz, V. V., Lee, Y.-P., & Bourassa, A. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1703-6 · Cited by 63
Mechanical properties and molecular structures of virgin and recycled HDPE polymers used in gravity sewer systems
Alzerreca, M., Paris, M., Boyron, O., Orditz, D., Louarn, G., & Correc, O. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.06.012 · Cited by 63
Biodegradation of unsaturated poly(ester-amide)s and their hydrogels
Guo, K., & Chu, C. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.03.031 · Cited by 63
Comparison of mass spectrometric techniques for generating molecular weight information on a class of ethoxylated oligomers
Parees, D. M., Hanton, S. D., Clark, P. A. C., & Willcox, D. A. (1998) · Journal of the American Society for Mass Spectrometry · doi:10.1016/s1044-0305(97)00291-2 · Cited by 63
Shear-induced crystallization of isotactic polypropylene within the oriented scaffold of noncrystalline ultrahigh molecular weight polyethylene
Ávila‐Orta, C. A., Burger, C. P., Somani, R. H., Yang, L., Marom, G., Medellín‐Rodríguez, F. J., & Hsiao, B. S. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.136 · Cited by 63
Synthesis and characterization of poly(ester amide)s containing crystallizable amide segments
Lips, P. A. M., Broos, R., van Heeringen, M. J. M., Dijkstra, P. J., & Feijen, J. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.013 · Cited by 63
Micro-lens arrays generated by UV laser irradiation of doped PMMA
Beinhorn, F., Ihlemann, J., Luther, K., & Troe, J. H. (1999) · Applied Physics A · doi:10.1007/s003390050965 · Cited by 63
Polydimethylsiloxane Mechanical Properties Measured by Macroscopic Compression and Nanoindentation Techniques
Wang, Z. (2011) · Digital Commons - University of South Florida (University of South Florida) · Cited by 63
Glass‐Transition Phenomena in Polymer Blends
Kalogeras, I. M. (2016) · doi:10.1002/9783527653966.ch1 · Cited by 63
Decohesion Kinetics in Polymer Organic Solar Cells
Bruner, C., Novoa, F. D., Dupont, S. R., & Dauskardt, R. H. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506482q · Cited by 62
On the physical, chemical, and neutron shielding properties of polyethylene/boron carbide composites
Uddin, Z., Yasin, T., Shafiq, M., Raza, A., & Zahur, A. (2019) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2019.108450 · Cited by 62
Comparison of electrical properties of MS and MPS type diode in respect of (In2O3-PVP) interlayer
Tataroğlu, A., Altındal, Ş., & Azizian‐Kalandaragh, Y. (2019) · Physica B Condensed Matter · doi:10.1016/j.physb.2019.411733 · Cited by 62
Stratum Corneum‐Inspired Zwitterionic Hydrogels with Intrinsic Water Retention and Anti‐Freezing Properties for Intelligent Flexible Sensors
Wu, M. Y., Qiao, C., Sui, P., Luo, J., Li, Z., Cao, Y., Pei, R., Peng, X., & Zeng, H. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202422755 · Cited by 63
Block Copolymers with Gold Nanoparticles: Correlation between Structural Characteristics and Mechanical Properties
Mendoza, C., Pietsch, T., Gutmann, J. S., Jehnichen, D., Gindy, N., & Fahmi, A. (2009) · Macromolecules · doi:10.1021/ma8020954 · Cited by 62
Protein-Resistant Silicones: Incorporation of Poly(ethylene oxide) via Siloxane Tethers
Murthy, R., Cox, C. D., Hahn, M. S., & Grunlan, M. A. (2007) · Biomacromolecules · doi:10.1021/bm700543c · Cited by 62
The effect of ultra-thin graphite on the morphology and physical properties of thermoplastic polyurethane elastomer composites
Menes, O., Cano, M., Benedito, A., Giménez, E., Castell, P., Maser, W. K., & Benito, A. M. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.06.016 · Cited by 62
On the enhanced corrosion resistance of elastomer-modified polybenzoxazine/graphene oxide nanocomposite coatings
Caldona, E. B., de Leon, A. C. C., Mangadlao, J. D., Lim, K. J. A., Pajarito, B. B., & Advíncula, R. C. (2017) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2017.12.004 · Cited by 62
Molecular dynamics simulations of EPON-862/DETDA epoxy networks: structure, topology, elastic constants, and local dynamics
Kallivokas, S. V., Sgouros, A. P., & Theodorou, D. N. (2019) · Soft Matter · doi:10.1039/c8sm02071j · Cited by 62
Surface modification of waterborne polyurethane
Jeong, H. Y., Lee, M. H., & Kim, B. K. (2006) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.036 · Cited by 62
Aqueous dispersion of polyurethanes from H12MDI, PTAd/PPG, and DMPA: Particle size of dispersion and physical properties of emulsion cast films
Kim, B. K., & Kim, T. K. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070430218 · Cited by 62
Changes in rheological properties of gliadin as a function of temperature and moisture: Development of a state diagram
Madeka, H., & Kokini, J. L. (1994) · Journal of Food Engineering · doi:10.1016/0260-8774(94)90033-7 · Cited by 61
The roles of matrix polymer crystallinity and hydroxyapatite nanoparticles in modulating material properties of photo-crosslinked composites and bone marrow stromal cell responses
Wang, S., Kempen, D. H. R., Yaszemski, M. J., & Lu, L. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.015 · Cited by 61
On diffusion, dispersion and reaction in porous media
Valdés‐Parada, F. J., Aguilar-Madera, C. G., & Álvarez-Ramírez, J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.02.016 · Cited by 61
Correlating dynamical mechanical properties with temperature and clay composition of polymer-clay nanocomposites
Khan, A., Shamsi, M. H., & Choi, T. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2008.09.027 · Cited by 61
Synthesis and Characterization of CuO Nanoparticles and CuO Doped PVA Nanocomposites
Manjunath, A., Irfan, M., Anushree, K. P., Vinutha, K. M., & Yamunarani, N. (2016) · Advances in Materials Physics and Chemistry · doi:10.4236/ampc.2016.610026 · Cited by 61
Investigation of the interface between polyethylene and functionalized graphene: A computer simulation study
Nikkhah, S. J., Moghbeli, M. R., & Hashemianzadeh, S. M. (2015) · Current Applied Physics · doi:10.1016/j.cap.2015.07.007 · Cited by 61
Dynamic mechanical behaviour and its dependence on preparation method of structural epoxide resin
Mikolajczak, G., Cavaillé, J. Y., & Johari, G. P. (1987) · Polymer · doi:10.1016/0032-3861(87)90036-x · Cited by 61
Thermomechanical properties of glassy cereal foods
Meste, M. L., Roudaut, G., & Davidou, S. (1996) · Journal of thermal analysis · doi:10.1007/bf01992833 · Cited by 61
Bulk, surface, and blood-contacting properties of polyetherurethanes modified with polyethylene oxide
Okkema, A. Z., Grasel, T. G., Zdrahala, R. J., Solomon, D. D., & Cooper, S. L. (1989) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856289x00055 · Cited by 61
Mimicking Biological Phenol Reaction Cascades to Confer Mechanical Function
Wu, L. ‐., McDermott, M. K., Zhu, C., Reza Ghodssi, A., & Payne, G. F. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500792 · Cited by 60
Application of Glass Transition in Food Processing
Balasubramanian, S., Devi, A., Singh, K. K., Bosco, S. J. D., & Mohite, A. M. (2014) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2012.734343 · Cited by 60
Thermal conductivity dependence on chain length in amorphous polymers
Zhao, J., Jiang, J.-W., Wei, N., Zhang, Y., & Rabczuk, T. (2013) · Journal of Applied Physics · doi:10.1063/1.4804237 · Cited by 60
Morphology development in poly (lactic acid)/polyamide11 biobased blends: Chain mobility and interfacial interactions
Heshmati, V., Zolali, A. M., & Favis, B. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.05.056 · Cited by 60
Synthesis and Characterization of Bio-oil-Based Self-Curing Epoxy Resin
Celikbag, Y., Meadows, S., Barde, M., Adhikari, S., Buschle‐Diller, G., Auad, M. L., & Via, B. K. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b02123 · Cited by 60
The electrospinning process, conditions and control
Robb, B. C., & Lennox, B. (2011) · Elsevier eBooks · doi:10.1533/9780857092915.1.51 · Cited by 60

Authors: Sperling, L. H.
Corresponding author: Sperling, L.H.
Venue: Wiley eBooks
Publisher: Wiley
Published: 2005-11-04
DOI: 10.1002/0471757128
OpenAlex: W1581549611
Cited by: 2,917
References: 4
Citations by year: 2026: 28 · 2025: 44 · 2024: 53 · 2023: 45 · 2022: 52 · 2021: 88 · 2020: 115 · 2019: 124 · 2018: 108 · 2017: 122 · 2016: 122 · 2015: 145 · 2014: 157 · 2013: 135 · 2012: 143
FWCI: 45.76
Type: book
Language: en
Open access: closed
Licence: doi.wiley.com/10.1002/tdm_license_1.1 (tdm)
Locations: Wiley eBooks (publishedVersion)
Topics: Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
Keywords: polymer chain structure, polymer configuration, molecular weight, polymer size, concentrated polymer solutions, phase separation, amorphous polymers, polymer crystallization, liquid crystalline polymers, glass transition, rubber elasticity, polymer networks, polymer viscoelasticity, polymer rheology, polymer mechanical properties

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Introduction to Physical Polymer Science

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks