Macro, micro and nanostructured morphologies of multiphase polymer systems

Polymer/layered silicate nanocomposites: a review from preparation to processing

Ray, S. S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,826 · see citing works

Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials

Alexandre, M., & Dúbois, P. (2000) · Materials Science and Engineering R Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,381 · see citing works

The formation of emulsions in definable fields of flow

Taylor, G. I. (1934) · Proceedings of the Royal Society of London Series A Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1934.0169 · Cited by 2,506 · see citing works

A review on polymer–layered silicate nanocomposites

Pavlidou, S., & Papaspyrides, C. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,434 · see citing works

Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview

Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,231 · see citing works

The viscosity of a fluid containing small drops of another fluid

Taylor, G. I. (1932) · Proceedings of the Royal Society of London Series A Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1932.0169 · Cited by 1,971 · see citing works

Nonlinear dynamics and breakup of free-surface flows

Eggers, J. (1997) · Reviews of Modern Physics · doi:10.1103/revmodphys.69.865 · Cited by 1,821 · see citing works

DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS

Grace, H. P. (1982) · Chemical Engineering Communications · doi:10.1080/00986448208911047 · Cited by 1,504 · see citing works

Phase structure and adhesion in polymer blends: A criterion for rubber toughening

Wu, S. (1985) · Polymer · doi:10.1016/0032-3861(85)90015-1 · Cited by 1,430 · see citing works

Preparation and Mechanical Properties of Polypropylene−Clay Hybrids

Kawasumi, M., Hasegawa, N., Kato, M. P., Usuki, A., & Okada, A. (1997) · Macromolecules · doi:10.1021/ma961786h · Cited by 1,387 · see citing works

Synthesis and properties of two-dimensional nanostructures by direct intercalation of polymer melts in layered silicates

Vaia, R. A., Ishii, H. A., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,146 · see citing works

Nylon 6 nanocomposites: the effect of matrix molecular weight

Fornes, T. D., Yoon, P. J., Keskkula, H., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(01)00552-3 · Cited by 1,125 · see citing works

Formation of dispersed phase in incompatible polymer blends: Interfacial and rheological effects

Wu, S. (1987) · Polymer Engineering and Science · doi:10.1002/pen.760270506 · Cited by 1,119 · see citing works

On the instability of a cylindrical thread of a viscous liquid surrounded by another viscous fluid

Tomotika, S. (1935) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1935.0104 · Cited by 1,099 · see citing works

Nylon 6 nanocomposites by melt compounding

Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(00)00380-3 · Cited by 1,051 · see citing works

Polymer Melt Intercalation in Organically-Modified Layered Silicates: Model Predictions and Experiment

Vaia, R. A., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma9603488 · Cited by 1,009 · see citing works

Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites

Dennis, H., Hunter, D. L., Chang, D., Kim, S., White, J. L., Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(01)00473-6 · Cited by 966 · see citing works

Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization

Sundararaj, U., & Macosko, C. W. (1995) · Macromolecules · doi:10.1021/ma00112a009 · Cited by 887 · see citing works

Strategies for compatibilization of polymer blends

Koning, C. E. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00054-3 · Cited by 884 · see citing works

Lattice Model of Polymer Melt Intercalation in Organically-Modified Layered Silicates

Vaia, R. A., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma9514333 · Cited by 830 · see citing works

Preparation and mechanical properties of polypropylene-clay hybrids using a maleic anhydride-modified polypropylene oligomer

Hasegawa, N., Kawasumi, M., Kato, M. P., Usuki, A., & Okada, A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980103)67:1 · Cited by 662 · see citing works

Effect of organoclay structure on nylon 6 nanocomposite morphology and properties

Fornes, T. D., Yoon, P. J., Hunter, D. L., Keskkula, H., & Paul, D. R. (2002) · Polymer · doi:10.1016/s0032-3861(02)00400-7 · Cited by 620 · see citing works

Static Mixers in the Process Industries—A Review

Thakur, R. K., Vial, C., Nigam, K. D. P., Nauman, E. B., & Djelveh, G. (2003) · Process Safety and Environmental Protection · doi:10.1205/026387603322302968 · Cited by 599 · see citing works

PROST: A Parabolic Reconstruction of Surface Tension for the Volume-of-Fluid Method

Renardy, Y. Y., & Renardy, M. (2002) · Journal of Computational Physics · doi:10.1006/jcph.2002.7190 · Cited by 589 · see citing works

A hierarchical structure and properties of intercalated polypropylene/clay nanocomposites

Nam, P. H., Maiti, P., Okamoto, M., Kotaka, T., Hasegawa, N., & Usuki, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00512-2 · Cited by 502 · see citing works

Influence of compatibilizer and processing conditions on the dispersion of nanoclay in a polypropylene matrix

Lertwimolnun, W., & Vergnes, B. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.018 · Cited by 495 · see citing works

An experimental study of transient effects in the breakup of viscous drops

Stone, H. A., Bentley, B. J., & Leal, L. G. (1986) · Journal of Fluid Mechanics · doi:10.1017/s0022112086001118 · Cited by 460 · see citing works

Compatibilizers for melt blending: premade block copolymers

Macosko, C. W., Guégan, P., Khandpur, A. K., Nakayama, A., Marechal, P., & Inoue, T. (1996) · Macromolecules · doi:10.1021/ma9602482 · Cited by 458 · see citing works

Effect of interfacial forces on polymer blend morphologies

Hobbs, S. Y., Dekkers, M. J., & Watkins, V. H. (1988) · Polymer · doi:10.1016/0032-3861(88)90269-8 · Cited by 456 · see citing works

Formation of Co-continuous Structures in Melt-Mixed Immiscible Polymer Blends

Pötschke, P., & Paul, D. R. (2003) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1081/mc-120018022 · Cited by 454 · see citing works

Nanostructured Thermosets from Self-Assembled Amphiphilic Block Copolymer/Epoxy Resin Mixtures

Lipic, P. M., Bates, F. S., & Hillmyer, M. A. (1998) · Journal of the American Chemical Society · doi:10.1021/ja981544s · Cited by 450 · see citing works

Synthesis and characterization of maleated polyethylene/clay nanocomposites

Wang, K. H., Choi, M. H., Koo, C. M., Choi, Y. S., & Chung, I. J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00509-2 · Cited by 442 · see citing works

Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blends

Sinha Ray, S., Pouliot, S., Bousmina, M., & Utracki, L. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.009 · Cited by 436 · see citing works

Nanocomposites formed from linear low density polyethylene and organoclays

Hotta, S., & Paul, D. R. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.059 · Cited by 423 · see citing works

Novel approaches to polymer blends based on polymer nanoparticles

Kietzke, T., Neher, D., Landfester, K., Montenegro, R., Güntner, R., & Scherf, U. (2003) · Nature Materials · doi:10.1038/nmat889 · Cited by 421 · see citing works

Development of polymer blend morphology during compounding in a twin‐screw extruder. Part I: Droplet dispersion and coalescence—a review

Utracki, L. A., & Shi, Z. H. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760322405 · Cited by 419 · see citing works

M ICROSTRUCTURAL E VOLUTION IN P OLYMER B LENDS

Tucker, C. L., & Moldenaers, P. (2002) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.34.082301.144051 · Cited by 415 · see citing works

Modes of dispersion of viscoelastic fluids in flow

Vanoene, H. (1972) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(72)90355-4 · Cited by 375 · see citing works

Equation of change for ellipsoidal drops in viscous flow

Maffettone, P. L., & Minale, M. (1998) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(98)00065-2 · Cited by 369 · see citing works

Effect of Organoclay Platelets on Morphology of Nylon-6 and Poly(ethylene-ran-propylene) Rubber Blends

Khatua, B. B., Lee, D. J., Kim, H. Y., & Kim, J. K. (2004) · Macromolecules · doi:10.1021/ma0352072 · Cited by 365 · see citing works

The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing

Favis, B. D., & Chalifoux, J. ‐. (1987) · Polymer Engineering and Science · doi:10.1002/pen.760272105 · Cited by 356 · see citing works

Compatibilizing Bulk Polymer Blends by Using Organoclays

Si, M., Araki, T., Ade, H. W., Kilcoyne, A. L. D., Fisher, R. E., Sokolov, J. C., & Rafailovich, M. H. (2006) · Macromolecules · doi:10.1021/ma060125+ · Cited by 332 · see citing works

Versuch einer mathematischen Theorie der Koagulationskinetik kolloider Lösungen

Smoluchowski, M. (1918) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1918-9209 · Cited by 314 · see citing works

Compatibilization of Polymer Blends

Utracki, L. A. (2002) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450800601 · Cited by 297 · see citing works

Morphology development during the initial stages of polymer-polymer blending

SCOTT, C. (1995) · Polymer · doi:10.1016/0032-3861(95)91554-k · Cited by 291 · see citing works

A front-tracking method for computation of interfacial flows with soluble surfactants

Muradoğlu, M., & Tryggvason, G. (2007) · Journal of Computational Physics · doi:10.1016/j.jcp.2007.10.003 · Cited by 290 · see citing works

TPO based nanocomposites. Part 1. Morphology and mechanical properties

Lee, H.-S., Fasulo, P. D., Rodgers, W. R., & Paul, D. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.068 · Cited by 284 · see citing works

Design and properties of co-continuous nanostructured polymers by reactive blending

Pernot, H., Baumert, M., Court, F., & Ludwik Leibler, B. (2002) · Nature Materials · doi:10.1038/nmat711 · Cited by 280 · see citing works

Influence of composition on the morphology of polypropylene/polycarbonate blends☆

Favis, B. D., & Chalifoux, J. ‐. (1988) · Polymer · doi:10.1016/0032-3861(88)90388-6 · Cited by 280 · see citing works

Relationship between rheology and morphology of model blends in steady shear flow

Vinckier, I., Moldenaers, P., & Mewis, J. (1996) · Journal of Rheology · doi:10.1122/1.550800 · Cited by 276 · see citing works

Morphology‐processing relationships in polyethylene‐polyamide blends

Serpe, G., Jarrin, J., & Dawans, F. (1990) · Polymer Engineering and Science · doi:10.1002/pen.760300908 · Cited by 273 · see citing works

Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends

Gelfer, M. Y., Song, H. H., Liu, L., Hsiao, B. S., Chu, B., Rafailovich, M. H., Si, M., & Zaitsev, V. Y. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10360 · Cited by 263 · see citing works

Reactions at polymer–polymer interfaces for blend compatibilization

Macosko, C. W., Jeon, H. K., & Hoye, T. R. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.06.003 · Cited by 262 · see citing works

Nylon 6/Na–montmorillonite nanocomposites prepared by compounding Nylon 6 with Na–montmorillonite slurry

Hasegawa, N., Okamoto, H., Kato, M. P., Usuki, A., & Sato, N. (2003) · Polymer · doi:10.1016/s0032-3861(03)00215-5 · Cited by 261 · see citing works

The role of organically modified layered silicate in the breakup and coalescence of droplets in PBT/PE blends

Hong, J. S., Namkung, H., Ahn, K. H., Lee, S. J., & Kim, C. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.077 · Cited by 257 · see citing works

Morphology development in polymer blends

Sundararaj, U., Macosko, C. W., Rolando, R. J., & Chan, H. T. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760322404 · Cited by 232 · see citing works

The effect of processing parameters on the morphology of an immiscible binary blend

Favis, B. D. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070390207 · Cited by 228 · see citing works

Drop deformation, breakup, and coalescence with compatibilizer

Hu, Y., Pine, D. J., & Leal, L. G. (2000) · Physics of Fluids · doi:10.1063/1.870254 · Cited by 227 · see citing works

Co-continuous morphologies in polymer blends: a new model

Willemse, R. C., de Boer, A. P., van Dam, J., & Gotsis, A. D. (1998) · Polymer · doi:10.1016/s0032-3861(97)10200-2 · Cited by 226 · see citing works

Morphological structures produced by mixing in chaotic flows

Ottino, J. M., Leong, C. W., Rising, H., & Swanson, P. D. (1988) · Nature · doi:10.1038/333419a0 · Cited by 225 · see citing works

An Adaptive Mesh Algorithm for Evolving Surfaces: Simulations of Drop Breakup and Coalescence

Cristini, V., Bławzdziewicz, J., & Loewenberg, M. (2001) · Journal of Computational Physics · doi:10.1006/jcph.2001.6713 · Cited by 225 · see citing works

Rheology and morphology of compatibilized polymer blends

Puyvelde, P. V., Velankar, S., & Moldenaers, P. (2001) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(01)00113-3 · Cited by 224 · see citing works

Localization of carbon nanotubes at the interface in blends of polyamide and ethylene–acrylate copolymer

Baudouin, A., Devaux, J., & Bailly, C. (2010) · Polymer · doi:10.1016/j.polymer.2010.01.050 · Cited by 222 · see citing works

Effect of processing conditions on morphology and mechanical properties of compatibilized polypropylene nanocomposites

Modesti, M., Lorenzetti, A., Bon, D., & Besco, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.08.035 · Cited by 222 · see citing works

A study on polymer blending microrheology: Part IV. The influence of coalescence on blend morphology origination

Elmendorp, J. J., & der Vegt, A. K. V. (1986) · Polymer Engineering and Science · doi:10.1002/pen.760261908 · Cited by 220 · see citing works

A numerical study of the deformation and burst of a viscous drop in general shear flows

Rallison, J. M. (1981) · Journal of Fluid Mechanics · doi:10.1017/s002211208100116x · Cited by 218 · see citing works

Melt rheology of polymer blends

Utracki, L. A., & Kanial, M. R. (1982) · Polymer Engineering and Science · doi:10.1002/pen.760220211 · Cited by 214 · see citing works

Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites

Li, Y., & Shimizu, H. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.018 · Cited by 210 · see citing works

Role of Block Copolymers on Suppression of Droplet Coalescence

Lyu, S., Jones, T. D., Bates, F. S., & Macosko, C. W. (2002) · Macromolecules · doi:10.1021/ma020754t · Cited by 205 · see citing works

Three-dimensional shape of a drop under simple shear flow

Guido, S., & Villone, M. (1998) · Journal of Rheology · doi:10.1122/1.550942 · Cited by 204 · see citing works

Polyamide-12 layered silicate nanocomposites by melt blending

McNally, T., Murphy, W. R., Lew, C. Y., Turner, R. J., & Brennan, G. P. (2003) · Polymer · doi:10.1016/s0032-3861(03)00170-8 · Cited by 200 · see citing works

Novel cellulose derivatives. IV. Preparation and thermal analysis of waxy esters of cellulose

Sealey, J. E., Samaranayake, G., Todd, J. G., & Glasser, W. G. (1996) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(19960715)34:9 · Cited by 198 · see citing works

Deformation and Breakup of Liquid Droplets in a Simple Shear Field

KARAM, H. J., & Bellinger, J. C. (1968) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160028a009 · Cited by 192 · see citing works

Compatibilizing agents in polymer blends: Interfacial tension, phase morphology, and mechanical properties

Chen, C. C., & White, J. L. (1993) · Polymer Engineering and Science · doi:10.1002/pen.760331409 · Cited by 190 · see citing works

The effects of SEBS-g-maleic anhydride reaction on the morphology and properties of polypropylene/PA6/SEBS ternary blends

Wilkinson, A. N., Clemens, M. L., & Harding, V. M. (2004) · Polymer · doi:10.1016/j.polymer.2004.05.033 · Cited by 190 · see citing works

Model experiments concerning morphology development during the initial stages of polymer blending

Scott, C., & Macosko, C. W. (1991) · Polymer Bulletin · doi:10.1007/bf00587979 · Cited by 185 · see citing works

Factors influencing structure formation and phase size in an immiscible polymer blend of polycarbonate and polypropylene prepared by twin-screw extrusion

Favis, B. D., & Therrien, D. (1991) · Polymer · doi:10.1016/0032-3861(91)90429-m · Cited by 182 · see citing works

String Formation in Sheared Polymer Blends: Coalescence, Breakup, and Finite Size Effects

Migler, K. B. (2001) · Physical Review Letters · doi:10.1103/physrevlett.86.1023 · Cited by 176 · see citing works

Sorption and transport of water vapor in nylon 6,6 film

Lim, L., Britt, I. J., & Tung, M. A. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990110)71:2 · Cited by 175 · see citing works

Evolution of polymer blend morphology during compounding in a twin-screw extruder

Lee, J. K., & Han, C. D. (2000) · Polymer · doi:10.1016/s0032-3861(99)00325-0 · Cited by 175 · see citing works

Co-continuous morphologies in polymer blends: the influence of the interfacial tension

Willemse, R. C., de Boer, A. P., van Dam, J., & Gotsis, A. D. (1999) · Polymer · doi:10.1016/s0032-3861(98)00307-3 · Cited by 174 · see citing works

Particle Motions in Non-Newtonian Media. II. Poiseuille Flow

Gauthier, F., Goldsmith, H. L., & Mason, S. G. (1971) · Transactions of the Society of Rheology · doi:10.1122/1.549212 · Cited by 174 · see citing works

How copolymers promote mixing of immiscible homopolymers

Milner, S. T., & Xi, H. (1996) · Journal of Rheology · doi:10.1122/1.550731 · Cited by 170 · see citing works

The interface in binary mixtures of polymers containing a corresponding block copolymer: Effects of industrial mixing processes and of coalescence

Plochocki, A. P., Dagli, S. S., & Andrews, R. D. (1990) · Polymer Engineering and Science · doi:10.1002/pen.760301207 · Cited by 170 · see citing works

Interfacial tension reduction in PBT/PE/clay nanocomposite

Hong, J. S., Kim, Y. K., Ahn, K. H., Lee, S. J., & Kim, C. (2006) · Rheologica Acta · doi:10.1007/s00397-006-0123-1 · Cited by 167 · see citing works

Preparation and flammability properties of polyethylene–clay nanocomposites

Zhang, J., & Wilkie, C. A. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00398-1 · Cited by 166 · see citing works

Prediction and manipulation of the phase morphologies of multiphase polymer blends: 1. Ternary systems

Guo, H., Packirisamy, S., Gvozdic, N. V., & Meier, D. J. (1997) · Polymer · doi:10.1016/s0032-3861(96)00571-x · Cited by 165 · see citing works

Preparation and combustion behaviour of polymer/layered silicate nanocomposites based upon PE and EVA

Zanetti, M., & Costa, L. (2004) · Polymer · doi:10.1016/j.polymer.2004.04.043 · Cited by 163 · see citing works

Effect of Organic Modification on the Compatibilization Efficiency of Clay in an Immiscible Polymer Blend

Ray, S. S., & Bousmina, M. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200500447 · Cited by 162 · see citing works

Analysis of Morphology Formation in Elastomer Blends

Tokita, N. (1977) · Rubber Chemistry and Technology · doi:10.5254/1.3535144 · Cited by 161 · see citing works

Effect of blending sequence on microstructure of ternary nanocomposites

Dasari, A., Yu, Z., & Mai, Y. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.145 · Cited by 161 · see citing works

Influence of elastic properties on drop deformation and breakup in shear flow

Mighri, F., Carreau, P. J., & Ajji, A. (1998) · Journal of Rheology · doi:10.1122/1.550897 · Cited by 160 · see citing works

Experiments on mixing in continuous chaotic flows

Kusch, H. A., & Ottino, J. M. (1992) · Journal of Fluid Mechanics · doi:10.1017/s0022112092001435 · Cited by 160 · see citing works

Drop breakup in three-dimensional viscous flows

Cristini, V., Bławzdziewicz, J., & Loewenberg, M. (1998) · Physics of Fluids · doi:10.1063/1.869697 · Cited by 157 · see citing works

Nanocomposites formed from polypropylene/EVA blends

Martins, C. G., Larocca, N. M., Paul, D. R., & Pessan, L. A. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.059 · Cited by 155 · see citing works

Co‐continuous Polyamide 6 (PA6)/Acrylonitrile‐Butadiene‐Styrene (ABS) Nanocomposites

Li, Y., & Shimizu, H. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400654 · Cited by 154 · see citing works

Emulsifying effect of dimethyldioctadecylammonium-hectorite in polystyrene/poly(ethyl methacrylate) blends

Voulgaris, D., & Petridis, D. (2002) · Polymer · doi:10.1016/s0032-3861(02)00039-3 · Cited by 154 · see citing works

Effect of processing conditions on the formation of polypropylene/organoclay nanocomposites in a twin screw extruder

Lertwimolnun, W., & Vergnes, B. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20458 · Cited by 153 · see citing works

Polyolefin‐clay hybrids based on modified polyolefins and organophilic clay

Hasegawa, N., Okamoto, H., Kawasumi, M., Kato, M. P., Tsukigase, A., & Usuki, A. (2000) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20000801)280:1 · Cited by 152 · see citing works

Investigation on the polyamide 6/organoclay nanocomposites with or without a maleated polyolefin elastomer as a toughener

Chiu, F., Lai, S., Chen, Y.-L., & Lee, T.-H. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.077 · Cited by 151 · see citing works

Phase morphology development in immiscible PP/(PS/PPE) blends influence of the melt-viscosity ratio and blend composition

Everaert, V., Aerts, L., & Groeninckx, G. (1999) · Polymer · doi:10.1016/s0032-3861(99)00048-8 · Cited by 148 · see citing works

Drop breakup and fragment size distribution in shear flow

Vittorio Cristini, C., Guido, S., Alfani, A., Bławzdziewicz, J., & Loewenberg, M. (2003) · Journal of Rheology · doi:10.1122/1.1603240 · Cited by 147 · see citing works

Deformation and breakup of viscoelastic drops in planar extensional flows

Milliken, W. J., & Leal, L. G. (1991) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(91)87018-s · Cited by 145 · see citing works

Study of Morphologies of PMMA/PP/PS Ternary Blends

Valera, T. S., Morita, A. T., & Demarquette, N. R. (2006) · Macromolecules · doi:10.1021/ma052571n · Cited by 144 · see citing works

Influence of normal stress difference on polymer drop deformation

Levitt, L., Macosko, C. W., & Pearson, S. D. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10561 · Cited by 140 · see citing works

Rubber toughening of nylon 6 nanocomposites

Ahn, Y., & Paul, D. R. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.074 · Cited by 134 · see citing works

Stretching and breakup of droplets in chaotic flows

Tjahjadi, M., & Ottino, J. M. (1991) · Journal of Fluid Mechanics · doi:10.1017/s0022112091003671 · Cited by 132 · see citing works

A study on polymer blending microrheology: Part 1

Elmendorp, J. J., & Maalcke, R. J. (1985) · Polymer Engineering and Science · doi:10.1002/pen.760251608 · Cited by 131 · see citing works

The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends

Filippone, G., Dintcheva, N. T., Acierno, D., & Mantia, F. P. L. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.045 · Cited by 130 · see citing works

Reactive Extrusion: Toward Nanoblends

Hu, G., Cartier, H., & Plummer, C. J. G. (1999) · Macromolecules · doi:10.1021/ma981924y · Cited by 128 · see citing works

The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends

Lepers, J., Favis, B. D., & Tabar, R. J. (1997) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(199710)35:14 · Cited by 125 · see citing works

Effect of clay orientation on the tensile modulus of polypropylene–nanoclay composites

Galgali, G., Agarwal, S., & Lele, A. K. (2004) · Polymer · doi:10.1016/j.polymer.2004.06.027 · Cited by 123 · see citing works

Factors influencing encapsulation behavior in composite droplet-type polymer blends

Reignier, J., Favis, B. D., & Heuzey, M. (2002) · Polymer · doi:10.1016/s0032-3861(02)00684-5 · Cited by 122 · see citing works

Sheet formation in immiscible polymer blends: model experiments on initial blend morphology

Sundararaj, U., Dori, Y., & Macosko, C. W. (1995) · Polymer · doi:10.1016/0032-3861(95)91438-d · Cited by 119 · see citing works

Morphology Development through an Interfacial Reaction in Ternary Immiscible Polymer Blends

Horiuchi, S., Matchariyakul, N., Yase, K., & Kitano, T. (1997) · Macromolecules · doi:10.1021/ma9615258 · Cited by 119 · see citing works

Micro‐ and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces

Pracellà, M. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600584 · Cited by 119 · see citing works

Deformation and breakup of a viscoelastic drop in a Newtonian matrix under steady shear

Aggarwal, N., & Sarkar, K. (2007) · Journal of Fluid Mechanics · doi:10.1017/s0022112007006210 · Cited by 119 · see citing works

Preparation and properties of polyethylene‐clay hybrids

Kato, M. P., Okamoto, H., Hasegawa, N., Tsukigase, A., & Usuki, A. (2003) · Polymer Engineering and Science · doi:10.1002/pen.10111 · Cited by 116 · see citing works

Control of the Subinclusion Microstructure in HDPE/PS/PMMA Ternary Blends

Reignier, J., & Favis, B. D. (2000) · Macromolecules · doi:10.1021/ma991954g · Cited by 114 · see citing works

Rubber toughening of an amorphous polyamide by functionalized SEBS copolymers: morphology and Izod impact behavior

Huang, J., Keskkula, H., & Paul, D. R. (2004) · Polymer · doi:10.1016/j.polymer.2004.04.002 · Cited by 113 · see citing works

Drop Breakup in Simple Shear Fields of Viscoleastic Fluids

Flumerfelt, R. W. (1972) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160043a005 · Cited by 113 · see citing works

Study on morphology of ternary polymer blends. I. Effects of melt viscosity and interfacial interaction

Hemmati, M., Nazokdast, H., & Panahi, H. S. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1947 · Cited by 112 · see citing works

Ternary nylon-6/rubber/modified rubber blends: Effect of the mixing procedure on morphology, mechanical and impact properties

Cimmino, S., Coppola, F., D’Orazio, L., Greco, R., Maglio, G., Malinconico, M., Mancarella, C., Martuscelli, E., & Ragosta, G. (1986) · Polymer · doi:10.1016/0032-3861(86)90175-8 · Cited by 111 · see citing works

Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties

Mehta, S., Mirabella, F. M., Rufener, K., & Bafna, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.13693 · Cited by 111 · see citing works

Evidence for inversion of phase continuity during morphology development in polymer blending

Sundararaj, U., Macosko, C. W., & Shih, C. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10572 · Cited by 110 · see citing works

Composition effect on the core–shell morphology and mechanical properties of ternary polystyrene/styrene–butadiene rubber/polyethylene blends

Luzinov, I. A., Xi, K., Pagnoulle, C., Huynh-Ba, G., & Jérôme, R. (1999) · Polymer · doi:10.1016/s0032-3861(98)00468-6 · Cited by 109 · see citing works

Electrically conductive polymer nanocomposites of polymethylmethacrylate and carbon nanofibers prepared by chaotic mixing

Jiménez, G., & Jana, S. C. (2006) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2006.06.017 · Cited by 109 · see citing works

Viscoelastic interfacial properties of compatibilized poly(ε‐caprolactone)/polylactide blend

Wu, D., Zhang, Y., Yuan, L., Zhang, M., & Zhou, W. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21952 · Cited by 109 · see citing works

Characterization of agglomerate dispersion by erosion in simple shear flows

Rwei, S., Manas‐Zloczower, I., & Feke, D. L. (1991) · Polymer Engineering and Science · doi:10.1002/pen.760310804 · Cited by 109 · see citing works

The Influence of Surfactant on the Deformation and Breakup of a Viscous Drop: The Effect of Surfactant Solubility

Milliken, W. J., & Leal, L. G. (1994) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1994.1296 · Cited by 107 · see citing works

Two-dimensional study of drop deformation under simple shear for Oldroyd-B liquids

Chinyoka, T., Renardy, Y. Y., Renardy, M., & Khismatullin, D. B. (2005) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2005.07.005 · Cited by 106 · see citing works

Coarsening in Polyethylene-Copolymer Blends

Crist, B., & Nesarikar, A. R. (1995) · Macromolecules · doi:10.1021/ma00108a014 · Cited by 105 · see citing works

Observation of deformation and recovery of poly(isobutylene) droplet in a poly(isobutylene)/poly(dimethyl siloxane) blend after application of step shear strain

Yamane, H., Takahashi, M., Hayashi, R., Okamoto, K., Kashihara, H., & Masuda, T. (1998) · Journal of Rheology · doi:10.1122/1.550932 · Cited by 104 · see citing works

Orientation of carbon nanotubes in a sheared polymer melt

Hobbie, E. K., Wang, H., Kim, H., Lin‐Gibson, S., & Grulke, E. A. (2003) · Physics of Fluids · doi:10.1063/1.1562161 · Cited by 103 · see citing works

Shear and extensional rheology of EVA/layered silicate-nanocomposites

Gupta, R. K., Pasanovic-Zujo, V., & Bhattacharya, S. N. (2005) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2005.05.002 · Cited by 102 · see citing works

Morphology development in immiscible polymer blends: initial blend morphology and phase dimensions

Willemse, R. C., Ramaker, E. J. J., van Dam, J., & de Boer, A. P. (1999) · Polymer · doi:10.1016/s0032-3861(99)00038-5 · Cited by 101 · see citing works

Influence of elastic properties on drop deformation in elongational flow

Mighri, F., Ajji, A., & Carreau, P. J. (1997) · Journal of Rheology · doi:10.1122/1.550853 · Cited by 101 · see citing works

Boundary-integral method for drop deformation between parallel plates

Janssen, P. J. A., & Anderson, P. D. (2007) · Physics of Fluids · doi:10.1063/1.2715621 · Cited by 100 · see citing works

The dynamics of montmorillonite clay dispersion and morphology development in immiscible ethylene–propylene rubber/polypropylene blends

Kontopoulou, M., Liu, Y., Austin, J. R., & Parent, J. S. (2007) · Polymer · doi:10.1016/j.polymer.2007.05.068 · Cited by 98 · see citing works

Evolution of morphology in compatibilized vs uncompatibilized polyamide blends

Majumdar, B., Paul, D. R., & Oshinski, A. J. (1997) · Polymer · doi:10.1016/s0032-3861(96)00702-1 · Cited by 95 · see citing works

Fluid mechanics of the formation of polymer blends. Part I: Formation of lamellar structures

Lindt, J. T., & Ghosh, A. K. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760322403 · Cited by 94 · see citing works

Twin‐screw extrusion compounding of polypropylene/organoclay nanocomposites modified by maleated polypropylenes

Wang, Y., Chen, F., & Wu, K. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20407 · Cited by 92 · see citing works

Achievement of quasi-nanostructured polymer blends by solid-state shear pulverization and compatibilization by gradient copolymer addition

Tao, Y., Kim, J., & Torkelson, J. M. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.041 · Cited by 91 · see citing works

The effect of viscosity ratio on the phase inversion of polyamide 66/polypropylene blends

Hietaoja, P. T., Holsti‐Miettinen, R. M., Seppälä, J. V., & Ikkala, O. T. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070541104 · Cited by 91 · see citing works

Prediction of dispersed phase drop diameter in polymer blends: The effect of elasticity

Ghodgaonkar, P. G., & Sundararaj, U. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10562 · Cited by 91 · see citing works

Morphology and electrical properties of polyamide 6/polypropylene/multi-walled carbon nanotubes composites

Zhang, L., Wan, C., & Zhang, Y. A. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.06.005 · Cited by 88 · see citing works

Effect of some compatibilizing agents on clay dispersion of polypropylene‐clay nanocomposites

López‐Quintanilla, M. L., Sánchez‐Valdés, S., de Valle, L. F. R., & Medellín‐Rodríguez, F. J. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23262 · Cited by 88 · see citing works

Effect of compatibilization on the breakup of polymeric drops in shear flow

Velankar, S., Puyvelde, P. V., Mewis, J., & Moldenaers, P. (2001) · Journal of Rheology · doi:10.1122/1.1380424 · Cited by 85 · see citing works

Effects of viscosity ratio and composition on development of morphology in chaotic mixing of polymers

Jana, S. C., & Sau, M. (2004) · Polymer · doi:10.1016/j.polymer.2003.12.047 · Cited by 84 · see citing works

In-situ reactive blending to prepare polystyrene–clay and polypropylene–clay nanocomposites

Wang, D., & Wilkie, C. A. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00399-3 · Cited by 84 · see citing works

Simulation and experiments of droplet deformation and orientation in simple shear flow with surfactants

Feigl, K., Megı́as-Alguacil, D., Fischer, P., & Windhab, E. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.02.008 · Cited by 83 · see citing works

Formation of Nanostructured PVDF/PA11 Blends Using High-Shear Processing

Shimizu, H., Li, Y., Kaito, A., & Sano, H. (2005) · Macromolecules · doi:10.1021/ma051395f · Cited by 83 · see citing works

Deformation and relaxation of Newtonian drops in planar extensional flows of a Boger fluid

Tretheway, D. C., & Leal, L. G. (2001) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(01)00123-9 · Cited by 79 · see citing works

Milligrams to kilograms: An evaluation of mixers for reactive polymer blending

Sundararaj, U., Macosko, C. W., Nakayama, A., & Inoue, T. (1995) · Polymer Engineering and Science · doi:10.1002/pen.760350113 · Cited by 79 · see citing works

Morphology and Mechanical Properties of Rubber Toughened Amorphous Polyamide/MMT Nanocomposites

Yoo, Y., Cui, L., Yoon, P. J., & Paul, D. R. (2009) · Macromolecules · doi:10.1021/ma902232g · Cited by 79 · see citing works

Effect of Organoclay on the Morphology and Properties of Poly(propylene)/Poly[(butylene succinate)‐co‐adipate] Blends

Ray, S. S., Bandyopadhyay, J., & Bousmina, M. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700029 · Cited by 79 · see citing works

Elastomer particle morphology in ternary blends of maleated and non-maleated ethylene-based elastomers with polyamides: Role of elastomer phase miscibility

Huang, J., Keskkula, H., & Paul, D. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.11.087 · Cited by 78 · see citing works

Characterization of PP/HDPE blend-based nanocomposites using different maleated polyolefins as compatibilizers

Chiu, F., Yen, H.-Z., & Lee, C.-E. (2010) · Polymer Testing · doi:10.1016/j.polymertesting.2010.01.004 · Cited by 78 · see citing works

Effect of blending sequence on the microstructure and properties of PBT/EVA‐g‐MAH/organoclay ternary nanocomposites

Li, X., Park, H., Lee, J. O., & Ha, C. (2002) · Polymer Engineering and Science · doi:10.1002/pen.11105 · Cited by 77 · see citing works

Ternary polymer blend with core–shell dispersed phases: effect of the core-forming polymer on phase morphology and mechanical properties

Luzinov, I. A. (2000) · Polymer · doi:10.1016/s0032-3861(00)00057-4 · Cited by 77 · see citing works

Modeling of coalescence in polymer blends

Lyu, S., Bates, F. S., & Macosko, C. W. (2002) · AIChE Journal · doi:10.1002/aic.690480103 · Cited by 76 · see citing works

Coalescence in molten quiescent polymer blends

Fortelný, I., & Živný, A. (1995) · Polymer · doi:10.1016/0032-3861(95)90992-b · Cited by 75 · see citing works

Polymer‐Clay Nanocomposites Based on Blends of Polyamide‐6 and Polyethylene

Mehrabzadeh, M., & Kamal, M. R. (2002) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450800610 · Cited by 75 · see citing works

Deformation of a Newtonian drop in a viscoelastic matrix under steady shear flow

Guido, S., Simeone, M., & Greco, F. (2003) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(03)00118-6 · Cited by 74 · see citing works

Correlation between the Interfacial Tension and Dispersed Phase Morphology in Interfacially Modified Blends of LLDPE and PVC

Liang, H., Favis, B. D., Yu, Y., & Eisenberg, A. (1999) · Macromolecules · doi:10.1021/ma9805553 · Cited by 73 · see citing works

Ultralow Percolation Thresholds in Ternary Cocontinuous Polymer Blends

Zhang, J., Ravati, S., Virgilio, N., & Favis, B. D. (2007) · Macromolecules · doi:10.1021/ma0716480 · Cited by 73 · see citing works

Morphology development of in situ compatibilized semicrystalline polymer blends in a co‐rotating twin‐screw extruder

Cartier, H., & Hu, G. (1999) · Polymer Engineering and Science · doi:10.1002/pen.11489 · Cited by 72 · see citing works

Development of polymer blend morphology during compounding in a twin‐screw extruder. Part III: Experimental procedure and preliminary results

Bordereau, V., Carrega, M., Shi, Z. H., Utracki, L. A., & Sammut, P. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760322407 · Cited by 71 · see citing works

Droplet deformation in immiscible polymer blends during transient uniaxial elongational flow

Delaby, I., Ernst, B., Frœlich, D., & Müller, R. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10559 · Cited by 70 · see citing works

Melt elongation and recovery of polymer blends, morphology, and influence of interfacial tension

Gramespacher, H., & Meißner, J. (1997) · Journal of Rheology · doi:10.1122/1.550879 · Cited by 70 · see citing works

Effect of rotational speed of twin screw extruder on the microstructure and rheological and mechanical properties of nanoclay‐reinforced polypropylene nanocomposites

Peltola, P., Välipakka, E., Vuorinen, J., Syrjälä, S., & Hanhi, K. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20586 · Cited by 70 · see citing works

Extensional flow mixer for polymer nanocomposites

Tokihisa, M., Yakemoto, K., Sakai, T., Utracki, L. A., Sepehr, M., Li, J., & Simard, Y. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20542 · Cited by 70 · see citing works

A SANS determination of the influence of external conditions on the nanostructure of nafion membrane

Rollet, A., Gebel, G., Simonin, J., & Turq, P. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/1099-0488(20010301)39:5 · Cited by 70 · see citing works

A review on ternary immiscible polymer blends: morphology and effective parameters

Shokoohi, S., & Arefazar, A. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1310 · Cited by 69 · see citing works

Morphology of ternary immiscible polymer blends

Nemirovski, N., Siegmann, A., & Narkis, M. (1995) · Journal of Macromolecular Science Part B · doi:10.1080/00222349508219503 · Cited by 67 · see citing works

Morphology and properties of blends with different thermoplastic polyurethanes and polyolefines

P�tschke, P., Wallheinke, K., Fritsche, H., & Stütz, H. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970425)64:4 · Cited by 67 · see citing works

Blends of bisphenol A-based cyanate ester and bismaleimide: Cure and thermal characteristics

Nair, C. P. R., & Francis, T. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991227)74:14 · Cited by 65 · see citing works

Drop deformation during elongational flow in blends of viscoelastic fluids. Small deformation theory and comparison with experimental results

Delaby, I., Muller, R., & Ernst, B. (1995) · Rheologica Acta · doi:10.1007/bf00712313 · Cited by 65 · see citing works

The effect of compatibilizer on the coalescence of two drops in flow

Ha, J., Yoon, Y., & Leal, L. G. (2003) · Physics of Fluids · doi:10.1063/1.1555803 · Cited by 65 · see citing works

An experimental study of drop deformation and breakup in extensional flow at high capillary number

Ha, J., & Leal, L. G. (2001) · Physics of Fluids · doi:10.1063/1.1358306 · Cited by 65 · see citing works

Reactive Blending of Polyamide 6 and Styrene−Acrylonitrile Copolymer: Influence of Blend Composition and Compatibilizer Concentration on Morphology and Rheology

Sailer, C., & Handge, U. A. (2008) · Macromolecules · doi:10.1021/ma800200t · Cited by 65 · see citing works

Silicate layer exfoliation in polyolefin/clay nanocomposites based on maleic anhydride modified polyolefins and organophilic clay

Hasegawa, N., & Usuki, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20459 · Cited by 65 · see citing works

Influence of Addition of Organoclays on Morphologies in Nylon 6/LLDPE Blends

Yoo, Y., Park, C.-H., Lee, S., Choi, K., Kim, D. S., & Lee, J. H. (2005) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200400526 · Cited by 62 · see citing works

Compatibilization effect of TiO2 nanoparticles on the phase structure of PET/PP/TiO2 nanocomposites

Li, W., Karger-Kocsis, J., & Thomann, R. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21752 · Cited by 62 · see citing works

Dependence of phase morphology and mechanical properties of PS/SBR/PE ternary blends on composition: transition from core–shell to triple-phase continuity structures

Luzinov, I. A., Pagnoulle, C., & Jérôme, R. (2000) · Polymer · doi:10.1016/s0032-3861(99)00514-5 · Cited by 61 · see citing works

Coalescence in PC/SAN blends: effect of reactive compatibilization and matrix phase viscosity

Wildes, G., Keskkula, H., & Paul, D. R. (1999) · Polymer · doi:10.1016/s0032-3861(98)00776-9 · Cited by 61 · see citing works

Effect of clay on immiscible morphology of poly(butylene terephthalate)/polyethylene blend nanocomposites

Wu, D., Zhou, C., & Zhang, M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24088 · Cited by 61 · see citing works

Twin‐screw extrusion of polypropylene‐clay nanocomposites: Influence of masterbatch processing, screw rotation mode, and sequence

Treece, M. A., Zhang, W., Moffitt, R. D., & Oberhauser, J. P. (2007) · Polymer Engineering and Science · doi:10.1002/pen.20774 · Cited by 61 · see citing works

Influence of shear and elongation on drop deformation in convergent–divergent flows

Khayat, R. E., Luciani, A., Utracki, L. A., Godbille, F., & Picot, J. J. C. (2000) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(98)00083-4 · Cited by 61 · see citing works

The Extensional Flow Mixer, EFM

Luciani, A., & Utracki, L. A. (1996) · International Polymer Processing · doi:10.3139/217.960299 · Cited by 60 · see citing works

Morphology development in a polyethylene/polystyrene binary blend during twin-screw extrusion

Bourry, D., & Favis, B. D. (1998) · Polymer · doi:10.1016/s0032-3861(97)00397-2 · Cited by 60 · see citing works

Experimental Study on the Breakup of Model Viscoelastic Drops in Uniform Shear Flow

Varanasi, P. P., Ryan, M. E., & Stroeve, P. (1994) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00031a028 · Cited by 59 · see citing works

Transient polymeric drop extension and retraction in uniaxial extensional flows

Hooper, R. W., de Almeida, V. F., Macosko, C. W., & Derby, J. J. (2001) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(01)00112-4 · Cited by 59 · see citing works

Nanoclay‐induced morphology development in chaotic mixing of immiscible polymers

Dharaiya, D. P., & Jana, S. C. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20657 · Cited by 58 · see citing works

Drop shape dynamics under shear-flow reversal

Guido, S., Minale, M., & Maffettone, P. L. (2000) · Journal of Rheology · doi:10.1122/1.1315310 · Cited by 58 · see citing works

Influence of weak elasticity of dispersed phase on droplet behavior in sheared polybutadiene/poly(dimethyl siloxane) blends

Lerdwijitjarud, W., Larson, R. G., Sirivat, A., & Solomon, M. J. (2003) · Journal of Rheology · doi:10.1122/1.1530623 · Cited by 58 · see citing works

Vorticity Elongation in Polymeric Emulsions

Hobbie, E. K., & Migler, K. B. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.5393 · Cited by 56 · see citing works

Effects of the processing sequence and critical interparticle distance in PA6-clay/mSEBS nanocomposites

González, I., Eguiazábal, J., & Nazábal, J. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.11.027 · Cited by 55 · see citing works

Effect of marangoni stresses on the deformation and coalescence in compatibilized immiscible polymer blends

Puyvelde, P. V., Velankar, S., Mewis, J., Moldenaers, P., & Leuven, K. U. (2002) · Polymer Engineering and Science · doi:10.1002/pen.11088 · Cited by 55 · see citing works

Formation of Nanostructured Poly(dicyclopentadiene) Thermosets Using Reactive Block Polymers

Amendt, M. A., Chen, L., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma100318j · Cited by 54 · see citing works

Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review

Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238 · see citing works

The Effects of Copolymer Compatibilizers on the Phase Structure Evolution in Polymer Blends—A Review

Fortelný, I., & Jůza, J. (2021) · Materials · doi:10.3390/ma14247786 · Cited by 44 · see citing works

Description of the Droplet Size Evolution in Flowing Immiscible Polymer Blends

Fortelný, I., & Jůza, J. (2019) · Polymers · doi:10.3390/polym11050761 · Cited by 39 · see citing works

Dynamic mechanical properties of immiscible polymer systems with and without compatibilizer

Jose, S., Thomas, S., Parameswaranpillai, J., Aprem, A. S., & Karger-Kocsis, J. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.04.008 · Cited by 36 · see citing works

Influence of Protonic Ionic Liquid on the Dispersion of Carbon Nanotube in PLA/EVA Blends and Blend Compatibilization

Pereira, E. C. L., da Silva, M. E. C. F., Pontes, K., & Soares, B. G. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00234 · Cited by 31 · see citing works

Phase structure evolution during mixing and processing of poly(lactic acid)/polycaprolactone (PLA/PCL) blends

Fortelný, I., Ujčić, A., Michálková, D., Jůza, J., Mikešová, J., & Šlouf, M. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1445-x · Cited by 25 · see citing works

Effects of Phase Inversion on Molding Shrinkage, Mechanical, and Burning Properties of Injection-molded PET/HDPE and PS/HDPE Polymer Blends

Dobrovszky, K., & Ronkay, F. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1255752 · Cited by 20 · see citing works

Architectural Effects of Biodegradable Block Copolymers on Enhancing PLA/PCL Blend Compatibility: Molecular Dynamics Simulations

Prasitnok, O., & Prasitnok, K. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00158 · Cited by 13 · see citing works

Blends of Poly (Butylene Adipate-Co-Terephthalate) and Thermoplastic Whey Protein Isolate: A Compatibilization Study

de Andrade, M. F. C., Loureiro, H. C., Sarantópoulos, C. I. G. D. L., & Morales, A. R. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02118-1 · Cited by 12 · see citing works

Detecting impact toughness of polypropylene/poly(ethylene‐co‐octene) blends with various morphologies induced via chaotic and shear mixing

Li, K., & Huang, H. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23177 · Cited by 10 · see citing works

Modifications of simple models of polymer blend compatibilization using block copolymer

Fortelný, I., & Jůza, J. (2023) · Colloid & Polymer Science · doi:10.1007/s00396-023-05081-6 · Cited by 8 · see citing works

Prediction of average droplet size in flowing immiscible polymer blends

Fortelný, I., & Jůza, J. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45250 · Cited by 5 · see citing works

Improvement of the properties of poly (L-lactide)/ethylene-ethyl acrylate-glyceryl methacrylate terpolymer (EGA) by the introduction of stereocomplex polylactide crystals

Cheng, H., Yu, M., Shi, H., Zhang, Y., Yu, Y., Wang, L., & Han, C.-S. (2024) · Thermochimica Acta · doi:10.1016/j.tca.2024.179720 · Cited by 1 · see citing works

Enhancement of the properties of biodegradable poly(L-lactide)/poly(butylene carbonate) blends by introducing stereocomplex polylactide crystals

Cheng, H., Yu, M., Zhang, Y., Shi, H., Yu, Y., Wang, L., & Han, C.-S. (2024) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-024-13245-x · Cited by 2 · see citing works

Droplet size in flow: Theoretical model and application to polymer blends

Fortelný, I., & Jůza, J. (2017) · AIP conference proceedings · doi:10.1063/1.4982998 · Cited by 1 · see citing works

Prediction of the Phase Structure Evolution during Processing of Polymer Blends. Results and Problems

Fortelný, I., & Jůza, J. (2016) · Macromolecular Symposia · doi:10.1002/masy.201400225

Micro‐ and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces

Pracellà, M. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600584 · Cited by 119 · see citing works

Macro, Micro and Nano Mechanics of Multiphase Polymer Systems

Sarvestani, A. S., & Jabbari, E. (2011) · doi:10.1002/9781119972020.ch2

Multiphase Polymer Systems

Barzic, A. I., & Ioan, S. (2016) · CRC Press eBooks · doi:10.1201/9781315368009 · Cited by 11 · see citing works

Multiphase Polymer- Based Materials

Harrats, C. (2009) · CRC Press eBooks · doi:10.1201/9781420062182 · Cited by 23 · see citing works

Microstructure and Morphology Simulation

Zhou, H., Liu, F., & Zhao, P. (2013) · doi:10.1002/9781118444887.ch7