Hydrogen Storage Technologies: New Materials, Transport and Infrastructure
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The Hampson-Linde (or Joule-Thomson expansion) process is considered the most basic and simplest liquefaction process.
“The Hampson-Linde (or Joule-Thomson expansion) process is considered the most basic and simplest liquefaction process [56].”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
Some materials, such as silver, copper, charcoal, graphite, and supported chromium and ferric oxides, have been found effective for ortho-to para-hydrogen conversion.
“Some materials, such as silver [81][82][83], copper [84,85], charcoal [56], graphite [86], and supported chromium [87,88] and ferric [89,90] oxides, have been found to be effective for this conversion.”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
Non-evacuated insulation such as foams and fibrous insulation has a thermal conductivity of approximately 10^-2 W/m·K.
“non-evacuated insulation (such as foams and fibrous insulation) has a thermal conductivity of approximately 10 -2 W/m•K [56]”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
As hydrogen solubility decreases with decreasing temperature, hydrogen embrittlement for liquid hydrogen is significantly lower than that for gaseous hydrogen.
“However, as the hydrogen solubility decreases with decreasing temperature, hydrogen embrittlement for liquid hydrogen is significantly lower than that for gaseous hydrogen [56].”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
The stratification in liquid hydrogen is relatively stable because of the poor thermal conductivity of liquid hydrogen (0.0012 W/cm·K at -253°C).
“This stratification in liquid hydrogen is relatively stable because of the poor thermal conductivity of liquid hydrogen (0.0012 W/cm•K at -253 • C) [56].”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
In stationary liquid hydrogen storage, heat transfer from the surroundings is considered the most significant cause of hydrogen loss, which can reach 1% or might be higher in small storage tanks (0.1 and 100 m3 have boil-off of approximately 2 and 0.06%, respectively).
“In stationary liquid hydrogen storage, this type of hydrogen loss is considered the most significant one, which can reach 1% or might be higher in the case of small storage tanks (tanks with volumes of 0.1 and 100 m 3 have boil-off of approximately 2 and 0.06%, respectively) [56].”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
It was demonstrated that the system is able to realize zero boil-off for approximately 12 days of storage.
“It was demonstrated that the system is able to realize zero boil-off for approximately 12 days of storage [56].”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
Silver, copper, charcoal, graphite, supported chromium oxides, and supported ferric oxides have been found effective for ortho-to-para hydrogen conversion.
“Some materials, such as silver[81][82][83], copper[84,85], charcoal[56], graphite[86], and supported chromium[87,88] and ferric[89,90] oxides, have been found to be effective for this conversion.”
From 5917. https://doi.org/10.3390/en14185917. - (2021) · cites this paper as [56]
Cited by
Sorted by citations
(2021) · doi:10.3390/en14185917 · Cited by 708 · see citing works
Escamilla, A., Sánchez, D., & García-Rodríguez, L. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.03.238 · Cited by 143 · see citing works
- Authors
- Godula‐Jopek, A., Jehle, W., & Wellnitz, J.
- ORCID
- Godula‐Jopek, Agata
- Venue
- Wiley eBooks
- Publisher
- Wiley
- Published
- 2012-09-12
- OpenAlex
- W4230815658
- Cited by
- 56
- References
- 0
- Citations by year
- 2026: 3 · 2025: 10 · 2024: 4 · 2023: 5 · 2022: 10 · 2021: 2 · 2020: 5 · 2019: 4 · 2017: 3 · 2016: 2 · 2015: 4 · 2014: 2 · 2013: 2
- FWCI
- 1.57
- Type
- book
- Language
- en
- Open access
- closed
- Locations
- Wiley eBooks (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Hydrogen Storage and Materials
- Physical Sciences › Energy › Energy Engineering and Power Technology › Hybrid Renewable Energy Systems
- Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals
- Keywords
- hydrogen storage, hydrogen storage systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
