Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.

Osteogenic Effects of Ion Released from Biodegradable Metallic Magnesium and Calcium Coating

Open access

Abstract

This study investigates the effects of ion release and pH elevation from a biodegradable metallic magnesium (Mg) –30 calcium (Ca) coating on osteogenesis using osteoblast‐like cells. The coating, formed on titanium (Ti) via magnetron sputtering, has previously been shown to enhance osteogenesis by promoting calcite formation on the Ti surface upon degradation in vitro study. However, the individual and combined roles of released Mg 2+ , Ca 2+ , and pH elevation remain unclear. To clarify these effects, culture media supplemented with Mg 2+ and Ca 2+ salts are prepared. Mg 2+ at 4–5 m m promotes early alkaline phosphatase (ALP) activity compared to the 0.9 m m control, without affecting proliferation but suppressing mineralization. Ca 2+ at 2.3–3 m m enhances ALP activity without affecting proliferation or mineralization compared to the 1.3–2.2 m m control. When both ions coexist, proliferation, ALP activity, and mineralization are enhanced compared to Mg 2+ alone, suggesting a synergistic effect. Furthermore, the elevated pH resulting from the Mg–30Ca extract more effectively promotes proliferation, accelerates the peak of ALP activity, and supports mineralization than ions co‐supplementation. These findings indicate that Mg–30Ca coatings enhance osteogenesis through both ion release and pH elevation, providing new insight into the osteogenic potential of biodegradable metallic coatings.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/adbi.202500401

Cites

46 of 46 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Surface characterization of the untreated Ti and Mg–30Ca‐coated Ti. 3D laser microscopy images A), the surface roughness B), and scanning electron microscopy (SEM) images and mapping images of Ti, Mg, and Ca C) of untreated Ti and Mg–30Ca coated Ti. Data presented as mean ± SD, n = 3, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test. Significance was defined as p < 0.05.
Figure 1 Surface characterization of the untreated Ti and Mg–30Ca‐coated Ti. 3D laser microscopy images A), the surface roughness B), and scanning electron microscopy (SEM) images and mapping images of Ti, Mg, and Ca C) of untreated Ti and Mg–30Ca coated Ti. Data presented as mean ± SD, n = 3, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test. Significance was defined as p < 0.05.CC BY · PubMed Central
Figure 2 Cell density of MC3T3‐E1 cells after 1, 3, and 5 days of incubation in cell culture media containing 0.9 (control), 5, 10, 50, and 100 mm Mg2+. Data presented as mean ± SD, n = 5, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test, * represents p < 0.05, ** represents p < 0.01 compared to the control group at each incubation period, horizontal bars indicate significant differences among other groups.
Figure 2 Cell density of MC3T3‐E1 cells after 1, 3, and 5 days of incubation in cell culture media containing 0.9 (control), 5, 10, 50, and 100 mm Mg2+. Data presented as mean ± SD, n = 5, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test, * represents p < 0.05, ** represents p < 0.01 compared to the control group at each incubation period, horizontal bars indicate significant differences among other groups.CC BY · PubMed Central
Figure 3 Cell density of MC3T3‐E1 cells after 1 and 5 days of incubation in each group A). Fluorescence images of the MC3T3‐E1 cells after incubation for 1 and 5 days B). F‐actin (red) and nuclei (blue) of attached cells were stained with phalloidin and Hoechst (scale bars = 100 µm). Data presented as mean ± SD, n = 5, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test, * represents p < 0.05, ** represents p < 0.01 compared to the control group at each incubation period, horizontal bars indicate significant differences among other groups.
Figure 3 Cell density of MC3T3‐E1 cells after 1 and 5 days of incubation in each group A). Fluorescence images of the MC3T3‐E1 cells after incubation for 1 and 5 days B). F‐actin (red) and nuclei (blue) of attached cells were stained with phalloidin and Hoechst (scale bars = 100 µm). Data presented as mean ± SD, n = 5, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test, * represents p < 0.05, ** represents p < 0.01 compared to the control group at each incubation period, horizontal bars indicate significant differences among other groups.CC BY · PubMed Central
Figure 4 Optical microscope images of ALP‐stained area (blue) of each group after 4 and 7 days of incubation A) and the percentage of ALP‐stained area B). ARS‐stained images of the calcified deposition area (red) of each group after 21 days of incubation C). ARS‐stained area for quantification of mineral nodule formation D). (scale bar = 1 mm) Data presented as mean ± SD, n = 3–4, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test, * represents p < 0.05, ** represents p < 0.01 compared to the control group at each incubation period, horizontal bars indicate significant differences among other groups.
Figure 4 Optical microscope images of ALP‐stained area (blue) of each group after 4 and 7 days of incubation A) and the percentage of ALP‐stained area B). ARS‐stained images of the calcified deposition area (red) of each group after 21 days of incubation C). ARS‐stained area for quantification of mineral nodule formation D). (scale bar = 1 mm) Data presented as mean ± SD, n = 3–4, P‐values are calculated using one‐way ANOVA followed by Tukey's post hoc test, * represents p < 0.05, ** represents p < 0.01 compared to the control group at each incubation period, horizontal bars indicate significant differences among other groups.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 43 references

Research works printed but not linked: 3

  1. Nie X., 2020, Regener. Biomater., 7, 53
  2. Duncan R. L., 1998, Semin. Nephrol., 18, 178
  3. Jr B. G. R., 2001, Mol. Cancer Res., 12, 61

Metadata

Authors
Miyake, R., Shimabukuro, M., Terauchi, M., Marukawa, E., & Kawashita, M.
Affiliations
  • Institute of Science Tokyo (JP)
  • Laboratory for Biomaterials and Bioengineering, Institute of Integrated Research, Institute of Science Tokyo (JP)
Corresponding author
  • Miyake, Risa
  • Shimabukuro, Masaya
Venue
Advanced Biology
Publisher
Wiley
Published
2025-11-12
Volume
9
Issue
12
Pages
e00401-e00401
ISSN
2701-0198 (ISSN-L)
OpenAlex
W4416143460
Cited by
5
References
43
Citations by year
2026: 5
FWCI
1.05
Type
journal article
Language
en
Open access
Licence
Locations
  • Advanced Biology (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • PubMed Central (publishedVersion, cc-by)
Funders
  • Ministry of Education, Culture, Sports, Science and Technology
  • Japan Society for the Promotion of Science (JP24K12981)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
  • Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
  • Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
Keywords
ion release, pH elevation, bone formation, osteoblast-like cells, alkaline phosphatase activity, mineralization, titanium implants, calcite formation, coating degradation
MeSH terms
Alkaline Phosphatase, Alloys, Animals, Calcium, Cell Line, Hydrogen-Ion Concentration, Ions, Magnesium, Osteoblasts, Osteogenesis, Titanium, Coated Materials, Biocompatible, Cell Proliferation, Mice

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Osteogenic Effects of Ion Released from Biodegradable Metallic Magnesium and Calcium Coating. https://app.cochat.ai/papers/10.1002/adbi.202500401
The paper
Miyake, R., Shimabukuro, M., Terauchi, M., Marukawa, E., & Kawashita, M. (2025). Osteogenic Effects of Ion Released from Biodegradable Metallic Magnesium and Calcium Coating. Advanced Biology. https://doi.org/10.1002/adbi.202500401

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.