Titanium Alloys for Aerospace Applications
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
There is probably no other material more closely related to aerospace than titanium and its alloys. With a density of 4.5g/cm 3 , titanium alloys are only about half as heavy as steel or Ni‐based superalloys, yielding an excellent strength‐to‐weight ratio. Furthermore, they have exceptional corrosion resistance. The use of titanium alloys in the aerospace sector will be highlighted including airframe, engine, helicopter, and space applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An overview on the use of titanium in the aerospace industry
Boyer, R. R. (1996) · Materials Science and Engineering: A · doi:10.1016/0921-5093(96)10233-1 · Cited by 2,442
Processing and Applications of Intermetallic γ-TiAl-Based Alloys
Clemens, H., & Kestler, H. (2000) · Advanced Engineering Materials · doi:10.1002/1527-2648(200009)2:9<551::aid-adem551>3.0.co;2-u · Cited by 596
Recent Progress in the Development of Gamma Titanium Aluminide Alloys
Appel, F., Brossmann, U., Christoph, U., Eggert, S., Janschek, P., Lorenz, U., Müllauer, J., Oehring, M., & Paul, J. D. H. (2000) · Advanced Engineering Materials · doi:10.1002/1527-2648(200011)2:11<699::aid-adem699>3.0.co;2-j · Cited by 399
Gamma titanium aluminides as prospective structural materials
Loria, E. A. (2000) · Intermetallics · doi:10.1016/s0966-9795(00)00073-x · Cited by 391
An overview of monolithic titanium aluminides based on Ti3Al and TiAl
Djanarthany, S., Viala, J.-C., & Bouix, J. (2001) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(01)00328-5 · Cited by 293
Titanium Aluminides - An Overview
Lipsitt, H. A. (1984) · MRS Proceedings · doi:10.1557/proc-39-351 · Cited by 156
Ward, C. H. (1993) · International Materials Reviews · doi:10.1179/imr.1993.38.2.79 · Cited by 73
Self-citationAlternate materials choices—some challenges to the increased use of Ti alloys
Williams, J. C. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(98)01179-4 · Cited by 56
Ward, C. H. (1993) · International Materials Reviews · doi:10.1179/095066093790101770 · Cited by 41
Self-citation
Research works printed but not linked: 12
- P.‐J. Winkler M. A. Däubler M. Peters inTitanium ’92: Science and Technology TMS Warrendale PA1993 pp. 877–2890.
- M. Peters R. Braun in4th European Conf. on Adv. Mater. and Processes – EUROMAT 95 Associazione Italiana di Metallurgia Milano1995 pp. 55–64.
- D. Eylon S. R. Seagle inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg2000 pp. 37–41.
- Peters M., 1995, Titanium World, 2, 15
- Froes F.H., 1995, Light Met. Age, Oct. 6
- Martin R., 2000, J. Met., 52, 24
- Titanium and Titanium Alloys(Eds: C. Leyens M. Peters) Wiley‐VCH Weinheim2003.
- IMI 834 and TIMETAL 110(Eds: M. Peters C. Leyens W. A. Kaysser) DLR Cologne1994 pp. 11–76.
- R. R. Boyer J. C. Williams N. E. Paton inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg Russia 2000 pp. 1007–1016.
- A. Gilchrist T. M. Pollock inStructural Intermetallics(Eds: K. J. Hemker D. M. Dimiduk) TMS Warrendale PA2001 pp. 3–12.
- A. Vassel J. Y. Guedou inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg2000 pp. 1017–1026.
- U. Rieck inAdvanced Aerospace Materials(Eds: M. Peters W. A. Kaysser) DGLR Bad Godesberg2001 pp. 213–219.
Cited by
Items 501–600 of 985
Zhu, X., Li, C., & Qian, X. (2022) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/09544054221100603 · Cited by 9
Hou, F., Zhao, G., Zhang, H., Zhang, H., & Huang, C. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.04.061 · Cited by 9
Computational analysis of the graded porosity distribution on the elastic modulus of Ti foams
Aguilar, C. E., Salvo, C., Henriquez, J., Vega, D., Alonso, I., & Muñoz, L. A. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.106391 · Cited by 9
Chen, L., Pan, L., Xuan, H., Sun, Z., Niu, X., Song, Y., & Zheng, Y. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107913 · Cited by 9
Galvanic corrosion behaviour of hot-dipped zinc-aluminum alloy coated titanium-aluminum couples
Wang, R. N., Zhang, P., Wang, P., Wu, H., Wei, D., Wei, X., Wang, Q., & Chen, X. H. (2013) · Materials and Corrosion · doi:10.1002/maco.201307172 · Cited by 9
Machining of Aircraft Titanium With Abrasive-Waterjets for Fatigue Critical Applications
Liu, H.-T., Hovanski, Y., & Dahl, M. E. (2011) · Journal of Pressure Vessel Technology · doi:10.1115/1.4004834 · Cited by 9
Odetola, P. I., Popoola, A. P. I., Ajenifuja, E., & Popoola, O. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab16ff · Cited by 9
“Metalmatrix composites (MMCs) are advanced profile propertiesmaterial coined out of synergized incorporation of continuous or discontinuous reinforcements in the bulkmetalmatrix (Peters et al 2003, Campbell Jr 2006, Zadra andGirardini 2014).”
BackgroundMicro-particles spraying via non-stationary flame acceleration process
Yakovenko, I. S., & Kiverin, A. D. (2020) · Acta Astronautica · doi:10.1016/j.actaastro.2020.10.044 · Cited by 9
High-Temperature Dry Sliding Wear Behavior of Ti–10V–2Fe–3Al
Calvin Samuel., S., Chodancar, Y., Kanther, S., Arivarasu, M., & Prabhu, T. R. (2021) · Journal of Tribology · doi:10.1115/1.4050015 · Cited by 9
Çetin, M. E., Polat, G., Tekin, M., BATIBAY, A. B., & Kotan, H. (2021) · Materials Testing · doi:10.1515/mt-2020-0099 · Cited by 9
Chatterjee, A., Mishra, A., Sharma, S., & Bhagchandani, R. K. (2022) · AIP conference proceedings · doi:10.1063/5.0110507 · Cited by 9
Finite-Element Modeling of Titanium Powder Densification
Ye, B., Matsen, M. R., & Dunand, D. C. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0839-0 · Cited by 9
Zhang, Z., Yao, B., Li, Z., Zhu, J., Qi, Y., Wen, T., Liu, Z., Wang, D., & Yu, J. (2025) · Materials Science and Engineering B · doi:10.1016/j.mseb.2025.118409 · Cited by 8
Lee, S., Choi, H., Cho, Y., Baek, M. J., Park, H., Seok, M., Kwon, Y. N., Kang, N., & Lee, D.-J. (2025) · Materials · doi:10.3390/ma18143285 · Cited by 8
Oxygen and strain co-driven cubic phase in Ti and its mechanical response
Qu, Q., Huang, Y., Chen, Z., Haberfehlner, G., Popov, M. N., Zhang, Y., Song, K., Kothleitner, G., & Zhang, Z. (2025) · Acta Materialia · doi:10.1016/j.actamat.2025.121442 · Cited by 8
KAYIRAN, H. F. (2026) · Applied Expert Systems and Knowledge Management · doi:10.59543/qhn3ek50 · Cited by 8
Lozhkomoev, A. S., Казанцев, С. О., Bakina, O. V., Первиков, А. В., Chzhou, V. R., Rodkevich, N. G., & Лернер, М. И. (2022) · Journal of Cluster Science · doi:10.1007/s10876-022-02382-8 · Cited by 8
Microstructural Characteristics and Material Failure Mechanism of SLM Ti-6Al-4V-Zn Alloy
Cheng, Y.-J., Hung, F., & Zhao, J. (2023) · Materials · doi:10.3390/ma16237341 · Cited by 8
“Currently, this technology has been widely applied in industries such as automotive, aerospace, and medical fields [2,3].”
MethodNonthermal Plasma Synthesis of Metallic Ti Nanocrystals
Tu, Q., Poerschke, D. L., & Kortshagen, U. R. (2024) · Nanomaterials · doi:10.3390/nano14030264 · Cited by 8
“Titanium and its alloys are crucial resources in aerospace and biomedical materials due to their light weight, superior mechanical properties, and biocompatibility [1–3].”
BackgroundJudd, K. G., Tsaknopoulos, K. L., Sousa, B. C., Pepi, M., & Cote, D. L. (2024) · Materials · doi:10.3390/ma17051122 · Cited by 8
Behera, A. N., Murty, T., Sarkar, A., Kapoor, R., Singh, R. N., Kumar, V., Arora, U. K., & Kapoor, K. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.176791 · Cited by 8
Li, Z., Xing, S., Wu, S., Hou, J., & Wu, S. (2024) · Metals · doi:10.3390/met14121316 · Cited by 8
Gupta, J., Jha, I. K., Khatirkar, R. K., & Singh, J. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-10667-y · Cited by 8
“This is especially evident in its usage in applications (Ref 4), such as military and aerospace, wherein components endure elevated levels of stress.”
Zhang, Y., Outeiro, J. C., Nouveau, C., Marcon, B., & Denguir, L. A. (2025) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2025.100165 · Cited by 8
Synergistic regulation of oxygen and nitrogen in V-Al master alloy for aerospace Ti alloys
Wang, Y., Zhang, X., Man, J., Chen, Q., Yang, J., Wang, K., & Ni, W. (2025) · Vacuum · doi:10.1016/j.vacuum.2025.114408 · Cited by 8
Li, X., Liu, S., Wang, J., Yu, M., & Tang, H. (2019) · Coatings · doi:10.3390/coatings9040261 · Cited by 8
Kotzem, D., Teschke, M., Juechter, V., Körner, C., & Walther, F. (2022) · Materials Testing · doi:10.1515/mt-2021-2137 · Cited by 8
Effect of Si Contents on the Properties of Ti15Mo7ZrxSi Alloys
Jiménez-Marcos, C., Rosca, J. C. M., Bălțatu, M. S., & Vizureanu, P. (2023) · Materials · doi:10.3390/ma16144906 · Cited by 8
Zhu, Q.-Q., Huang, S., Lan, H., Niu, W., Sun, T., Wang, G.-Q., Yang, X.-D., & Li, J. (2023) · Vacuum · doi:10.1016/j.vacuum.2023.112535 · Cited by 8
Additive Manufacturing of Titanium Alloys-A Review
Kiran, M. B. (2021) · International Conference on Industrial Engineering and Operations Management (IEOM) · doi:10.46254/an11.20210473 · Cited by 8
Mechanical Properties and Performance of Titanium-Based Alloys Used in Aerospace Applications
Abdulrahman, A. M., Siddique, A. M. S. U., & Barnawi, R. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1004880 · Cited by 8
Corrosion Behavior of Nano/Sub‐Micron F401 Titanium Alloy
Aghion, E., Guinguis, I., & Goldman, J. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400147 · Cited by 8
Zhan, X., Liu, Y., Liu, J., Meng, Y., Wei, Y., Yang, J., & Liu, X. (2017) · Journal of Laser Applications · doi:10.2351/1.4975824 · Cited by 8
Ti/B4C Composites Prepared by In Situ Reaction Using Inductive Hot Pressing
Ariza, E., Montealegre-Meléndez, I., Arévalo, C. M., Kitzmantel, M., & Neubauer, E. (2017) · Key engineering materials · doi:10.4028/www.scientific.net/kem.742.121 · Cited by 8
“Among the great advantages of this type of material, it is worth highlighting properties such as: corrosion and high temperatures resistance, high specific stiffness and high Young ́s modulus [1-3].”
BackgroundRelinque, J. J., García-Romero, M. G., Hernández‐Saz, J., Navas, J., Mena, A. J. G., Sales, D. L., Navas, F. J., Morales‐Cid, G., Aguilera, D., Periñán, A., et al. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0056-0 · Cited by 8
“For this reason, rapid prototyping techniques evolved to the so-called additive manufacturing ones [1], conceived not only for design and rapid elaboration of prototypes, but for short run massive production with specific applications in fields such as medicine for producing tissues and replicas of organs [5–7], aeron…”
MethodGao, Y., Wu, Y., Xiao, J., & Lu, D. (2018) · Manufacturing Review · doi:10.1051/mfreview/2018011 · Cited by 8
Research on the friction stir welding of Titanium Grade 1
Kosturek, R., Wachowski, M., Ślęzak, T., Śnieżek, L., Mierzyński, J., & Sobczak, U. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201824201006 · Cited by 8
Vaithiyanathan, V., Balasubramanian, V., Malarvizhi, S., Petley, V., & Gourav, R. A. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab3491 · Cited by 8
El-Tantawy, A., Kady, O. A. E., Yehia, H. M., & Ghayad, I. M. (2020) · Key engineering materials · doi:10.4028/www.scientific.net/kem.835.367 · Cited by 8
Fatigue Crack Growth Behavior of TA29 Titanium Alloy at Different Temperatures
Li, J., Cai, J. M., Duan, R., & Huang, X. (2020) · Materials science forum · doi:10.4028/www.scientific.net/msf.993.259 · Cited by 8
“After more than 40 years of unremitting efforts, the service temperature limit for titanium alloys has increased from 300 °C to 600 °C [1, 2].”
BackgroundThe study on surface quality and tool wear on laser-assisted micromachining of β21s titanium alloy
Xu, J., Nie, X., Zhai, C., Ren, W., Lian, Z., Tian, J., & Yu, H. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05970-y · Cited by 8
Design, manufacture, and characterization of a novel Ti-based nanocrystalline alloy
Renkó, J. B., Károly, D., & Bonyár, A. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.01.032 · Cited by 8
Experimental investigation and thermodynamic description of the Fe–Ta–Ti system
Yang, B., Guo, C., Li, C., & Du, Z. (2019) · Calphad · doi:10.1016/j.calphad.2019.03.002 · Cited by 8
Ouadah, O., Merad, G., & Abdelkader, H. S. (2021) · Solid State Communications · doi:10.1016/j.ssc.2021.114438 · Cited by 8
Oxidation behaviour of glass–quartz and glass–quartz–aluminium composite coatings on Ti–6Al–4V alloy
Xiao, Z., Tan, F. T., Wang, W., Lu, H., Cai, Y., Qiu, X., Chen, J., & Qiao, X. (2014) · Surface Engineering · doi:10.1179/1743294414y.0000000375 · Cited by 8
Machining of a hollow shaft made of β-titanium Ti-10V-2Fe-3Al
Machai, C., & Biermann, D. (2011) · IEEE International Symposium on Assembly and Manufacturing · doi:10.1109/isam.2011.5942364 · Cited by 8
Lovatt, C. R. (2008) · Research Commons (University of Waikato) · Cited by 8
Combustion Behavior and Microstructure of TC17 Titanium Alloy under Oxygen-Enriched Atmosphere
Zhang, C., Peng, X., Li, Z., Wang, C., Dou, C., Jiao, Y., Li, J., Wang, B., He, G., & Huang, J. (2023) · Metals · doi:10.3390/met13061020 · Cited by 7
Wang, B., Zhang, S., Tan, X., Lv, Y., Liang, L., Liao, Z., & Huang, A. (2023) · Metals · doi:10.3390/met13071196 · Cited by 7
Influence of laser beam process parameters on the bending ability of Ti-6Al-4V titanium alloy sheets
Naqvi, S. M. R., Haidry, A. A., Xie, D., Ahmad, S., Liu, Y., Chen, Y., Chen, J., Jamil, M., Yan, C., & Shen, L. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13903-2 · Cited by 7
Feng, H., Zhang, F., Xiong, Y., Hu, Y., & Tang, Y. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.180837 · Cited by 7
Risks Associated with the Use of High-Strength Titanium Alloys in Transportation Systems
Chausov, M. G., Maruschak, P. O., Prentkovskis, O., & Karpets, M. V. (2018) · Lecture notes in networks and systems · doi:10.1007/978-3-319-74454-4_20 · Cited by 7
Awotunde, M. A., Adegbenjo, A. O., Ajide, O. O., & Olubambi, P. A. (2022) · Critical reviews in solid state and materials sciences/CRC critical reviews in solid state and materials sciences · doi:10.1080/10408436.2022.2095977 · Cited by 7
“[31] In addition, they possess good bio-compatibility and great corrosion resistance.”
BackgroundAsim, U. B., Siddiq, A., McMeeking, R. M., & Kartal, M. E. (2021) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/1361-651x/ac11ba · Cited by 7
“Their deformation behaviour has been linked and found to be greatly influenced by the underlying microstructure [3]– [5].”
BackgroundTian, F., & Li, N. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.04.267 · Cited by 7
Influence of Process Conditions on Additive Manufacture of Ti6Al4V Alloy by SLM Technology
Fousová, M., & Vojtěch, D. (2017) · MANUFACTURING TECHNOLOGY · doi:10.21062/ujep/x.2017/a/1213-2489/mt/17/5/696 · Cited by 7
Lv, M., Fu, Y., Yang, Z., Zhang, H., & Cui, Z. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-05465-1 · Cited by 7
Feng, X., Liang, Y., Sun, H., & Wang, S. (2021) · Metals · doi:10.3390/met11071057 · Cited by 7
“TC4 alloy is one of the main components employed in the aerospace field, and it accounts for more than half of the global titanium alloy production [1,2].”
BackgroundGutzeit, K., Berndt, M., Schulz, J., Müller, D., Kirsch, B., von Harbou, E., & Aurich, J. C. (2022) · Production Engineering · doi:10.1007/s11740-022-01178-z · Cited by 7
“Titanium alloys, such as Ti-6Al-4 V, are widely used in industrial applications, due to a strong corrosion resistance as well as an excellent ratio of low density to high strength even at elevated temperatures [1, 2].”
BackgroundA Theoretical Description of the Ignition Conditions for TC17 Alloy in Oxygen-Enriched Atmospheres
Wang, C., Li, Z., Dou, C., Jiao, Y., Li, J., He, G., Song, X., Huang, J., & Zhang, C. (2023) · Combustion Science and Technology · doi:10.1080/00102202.2023.2178311 · Cited by 7
“Titanium alloys are frequently used in advanced aviation engines because of their high specific strength and corrosion resistance (Peters et al. 2003; Zhao, Xi, and Qu 2003).”
Evolution and mechanism of combustion microstructure of 600 ℃ high temperature titanium alloy
Wu, M., Mi, G., Li, P., & Huang, X. (2023) · Acta Physica Sinica · doi:10.7498/aps.72.20230396 · Cited by 7
Zhao, E., Kong, F., & Chen, Y. (2012) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405412459007 · Cited by 7
“High-temperature titanium alloys, especially the 600 C near-a high-temperature titanium alloys, have been processed into compressor discs, blades and spacers in the aerospace industry owing to their excellent specific properties at elevated temperatures.(1) Forging is a primary forming method for these alloys, but for…”
BackgroundCui, W., Chen, X., Cheng, L., Ding, J., Wang, C., & Wang, B. (2021) · Materials Research Express · doi:10.1088/2053-1591/abf765 · Cited by 7
Danard, Y. (2019) · theses.fr (ABES) · doi:10.70675/1607361azab56z46ccza176zc300cdaf03f0 · Cited by 7
Effet de l'oxydation sur le comportement mécanique de structures minces en alliages de titane
Baillieux, J. (2015) · theses.fr (ABES) · doi:10.70675/616768caz15cbz4882zb429z54ada28859c7 · Cited by 7
Kumar, P., Joshi, R. S., & Singla, R. K. (2023) · Wear · doi:10.1016/j.wear.2023.204860 · Cited by 6
Cui, D., Aggarwal, A., & Leparoux, M. (2024) · International Journal of Material Forming · doi:10.1007/s12289-024-01820-4 · Cited by 6
Chen, Z., Du, Y., Lu, Y., Wang, C., Xin, L., Zhu, S., & Wang, F. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.04.194 · Cited by 6
Lee, W., Hyun, Y., Won, J. W., Lee, H., Kang, S.-H., & Yoon, J. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.04.053 · Cited by 6
Ahemad, A. Z., Rattan, V., Jolly, S. S., Kalra, P., & Sharma, S. (2025) · Journal of Stomatology Oral and Maxillofacial Surgery · doi:10.1016/j.jormas.2025.102383 · Cited by 6
Cui, Z., & An, J. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.07.272 · Cited by 6
Hardya, K., Kuntal, V., Nau, H., Ji, S., Ali, E., Soni, A., Choudhury, B., Singh, V., Nayak, L. J., Patel, D., et al. (2025) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2025.2555070 · Cited by 6
“The α+β titanium alloys such as Ti-6Al-4 V and β titanium alloys are primarily implemented in various aircraft components that includes structural components, engine components, heat exchanger, fuel system components, landing gears etc [66–68].”
Dziri, A., Ammar, K., Forest, S., Proudhon, H., Sirvin, Q., Richeton, T., & Texier, D. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114801 · Cited by 6
Yeoh, W. Y., Lan, B., & Lowe, M. J. S. (2025) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2024.0776 · Cited by 6
Strength of the Ti–6Al–4V Titanium Alloy under Conditions of Impact and Short Pulse Loading
Evstifeev, A. D., Petrov, Y. V., Kazarinov, N. A., & Valiev, R. R. (2018) · Physics of the Solid State · doi:10.1134/s1063783418120120 · Cited by 6
Tang, S., Hu, X., Yu, J., Liu, A., Shi, Z., Li, Z., Zhang, Y., & Wang, Z. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.120431 · Cited by 6
Gießelmann, E. C. J., Engel, S., Saudi, I. M. E., Schumacher, L., Radzieowski, M., Gerdes, J. M., & Janka, O. (2023) · Solids · doi:10.3390/solids4030011 · Cited by 6
Effect of heat treatment on microstructure and mechanical properties of TiBw/TC18 composites
Zhang, Y., Mao, X., Wang, L., Dong, L., Zhang, Y., & Li, M.-J. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.03.146 · Cited by 6
Xie, Y., Yan, Z., Zhou, Q., Cao, J., Liang, X., Dong, P., Ni, J., Wang, F., & Wang, G. (2024) · Additive Manufacturing Frontiers · doi:10.1016/j.amf.2024.200168 · Cited by 6
Effect of heat treatment on wear resistance of cold-sprayed Ti-diamond composite coating
Li, W., Zhou, H., & Wang, C. (2024) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2024.106924 · Cited by 6
TiB-based coating formation on Ti6Al4V alloy
Efe, G. C., Yener, T., Ozcelik, G., & Ozkan, H. (2024) · Materials Testing · doi:10.1515/mt-2024-0076 · Cited by 6
Hu, J., Wang, Y., Chen, Y., Zhang, S., & Chen, X. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.179869 · Cited by 6
Titanlegierungen in der Luft‐ und Raumfahrt
Peters, M., Kumpfert, J., & Leyens, C. (2002) · Wiley eBooks · doi:10.1002/9783527611089.ch13 · Cited by 6
Self-citationVaithiyanathan, V., Balasubramanian, V., Malarvizhi, S., Petley, V., & Verma, S. (2019) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-019-00050-5 · Cited by 6
RetractedMicrostructures and mechanical properties of ternary Ti–Si–Sn alloys
Tiwary, C. S., Paliwal, M., Kashyap, S., Pandey, P., Sarkar, S., Kundu, I., Bhaskar, S., Jung, I., Chattopadhyay, K., & Banerjee, D. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138472 · Cited by 6
Saran, H. L., & RamReddy, C. (2023) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/10407790.2023.2262121 · Cited by 6
“Peters et al. [17] and Singh et al. [18] explained the precise applicability of Ti-alloys in the field of aerospace.”
A Novel Al-Ti-C-B-Ce Alloy Preparation Process and Its Refinement Effect to A356 Alloy
Liu, T., Hu, M., Ran, Q., Jiang, B., Ji, Z., & Zhou, X. (2023) · JOM · doi:10.1007/s11837-023-06258-8 · Cited by 6
Oxidation of metal matrix composites
Li, Z., & Gao, W. (2008) · Elsevier eBooks · doi:10.1533/9781845694258.2.365 · Cited by 6
Huang, T., Jiang, C., & Grechnikov, F. V. (2017) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-017-0163-8 · Cited by 6
Mahamood, R. M., & Akinlabi, E. T. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.02.262 · Cited by 6
Grain morphology and texture evolution of TC21 titanium alloy during annealing with different time
Xin, L., Wang, K., Yan, Z., Li, D. ‐., Xin, R., & Liu, Q. (2019) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.201800227 · Cited by 6
Effect of Heat Treatment on Microstructure and Properties of Ti-6Al-4V-0.5Si alloy
Wang, W., Zhang, M., Liu, Y., Xie, J., Wu, Y., & Yang, S. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.12.093 · Cited by 6
Growth Kinetics of TiAl3 Diffusion Coating by Pack Cementation on Beta 21-S
Chaia, N., Cossú, C. M. F. A., Parrisch, C. J., Cotton, J. D., Coelho, G. C., & Nunes, C. Â. (2020) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-020-00819-z · Cited by 6
Dry Cutting Experiments Database Ti6Al4V and Ck45Preprint
Klippel, H., Süssmaier, S., Kuffa, M., & Wegener, K. (2022) · arXiv (Cornell University) · doi:10.3929/ethz-b-000587880 · Cited by 6
Yurchenko, N., Shaysultanov, D. G., Povolyaeva, E., Moskovskikh, D., Zherebtsov, S. V., & Stepanov, N. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.176445 · Cited by 5
Gökçe, A., Balla, V. K., Nath, S. D., Akilan, A. A., & Atre, S. V. (2025) · Metals · doi:10.3390/met15070728 · Cited by 5
Rakhadilov, B. K., Магазов, Н., Aringozhina, Z., Uazyrkhanova, G., Uazyrkhanova, Z., & Amanov, A. T. (2025) · Materials · doi:10.3390/ma18153487 · Cited by 5
Hou, J., Li, Z., Chen, M., Fu, Y., Wu, S., Cui, G., Cui, C., Zhang, W., Chen, W., Feng, Y., et al. (2025) · Carbon · doi:10.1016/j.carbon.2025.120713 · Cited by 5
The Low-Cycle Fatigue Performance of Emerging Titanium Alloys for Aeroengine Applications
Davies, P. W., John, S., Davies, H., Bache, M. R., Fox, K., Collins, C., Martin, N., & Sandala, R. (2025) · Metals · doi:10.3390/met15111274 · Cited by 5
“Their high strength-to-weight ratio across ambient to intermediate temperatures has enabled their widespread use in aeroengine components, including compressors, containment structures, and fan assemblies [1].”
Du, Z., Rui, S., Ma, B., Meng, X., Ren, L., Xu, L., Yao, F., Yu, D., & Cao, C. (2025) · Frontiers in Materials · doi:10.3389/fmats.2025.1686963 · Cited by 5
Metadata
- Authors
- Peters, M., Kumpfert, J., Ward, C. H., & Leyens, C.
- Affiliations
- Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) (DE)
- United States Air Force Research Laboratory (US)
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2003-06-26
- Volume
- 5
- Issue
- 6
- Pages
- 419-427
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2140565038
- Cited by
- 894
- References
- 8
- Citations by year
- 2026: 74 · 2025: 96 · 2024: 107 · 2023: 83 · 2022: 84 · 2021: 89 · 2020: 79 · 2019: 85 · 2018: 64 · 2017: 37 · 2016: 19 · 2015: 16 · 2014: 17 · 2013: 16 · 2012: 7
- FWCI
- 0.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- elib (German Aerospace Center) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Titanium Alloys Microstructure and Properties
- Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- titanium alloys, aerospace applications, specific strength, corrosion resistance, aircraft airframe, aircraft engines, helicopters, space applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.