Titanium Alloys for Aerospace Applications
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
There is probably no other material more closely related to aerospace than titanium and its alloys. With a density of 4.5g/cm 3 , titanium alloys are only about half as heavy as steel or Ni‐based superalloys, yielding an excellent strength‐to‐weight ratio. Furthermore, they have exceptional corrosion resistance. The use of titanium alloys in the aerospace sector will be highlighted including airframe, engine, helicopter, and space applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An overview on the use of titanium in the aerospace industry
Boyer, R. R. (1996) · Materials Science and Engineering: A · doi:10.1016/0921-5093(96)10233-1 · Cited by 2,442
Processing and Applications of Intermetallic γ-TiAl-Based Alloys
Clemens, H., & Kestler, H. (2000) · Advanced Engineering Materials · doi:10.1002/1527-2648(200009)2:9<551::aid-adem551>3.0.co;2-u · Cited by 596
Recent Progress in the Development of Gamma Titanium Aluminide Alloys
Appel, F., Brossmann, U., Christoph, U., Eggert, S., Janschek, P., Lorenz, U., Müllauer, J., Oehring, M., & Paul, J. D. H. (2000) · Advanced Engineering Materials · doi:10.1002/1527-2648(200011)2:11<699::aid-adem699>3.0.co;2-j · Cited by 399
Gamma titanium aluminides as prospective structural materials
Loria, E. A. (2000) · Intermetallics · doi:10.1016/s0966-9795(00)00073-x · Cited by 391
An overview of monolithic titanium aluminides based on Ti3Al and TiAl
Djanarthany, S., Viala, J.-C., & Bouix, J. (2001) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(01)00328-5 · Cited by 293
Titanium Aluminides - An Overview
Lipsitt, H. A. (1984) · MRS Proceedings · doi:10.1557/proc-39-351 · Cited by 156
Ward, C. H. (1993) · International Materials Reviews · doi:10.1179/imr.1993.38.2.79 · Cited by 73
Self-citationAlternate materials choices—some challenges to the increased use of Ti alloys
Williams, J. C. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(98)01179-4 · Cited by 56
Ward, C. H. (1993) · International Materials Reviews · doi:10.1179/095066093790101770 · Cited by 41
Self-citation
Research works printed but not linked: 12
- P.‐J. Winkler M. A. Däubler M. Peters inTitanium ’92: Science and Technology TMS Warrendale PA1993 pp. 877–2890.
- M. Peters R. Braun in4th European Conf. on Adv. Mater. and Processes – EUROMAT 95 Associazione Italiana di Metallurgia Milano1995 pp. 55–64.
- D. Eylon S. R. Seagle inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg2000 pp. 37–41.
- Peters M., 1995, Titanium World, 2, 15
- Froes F.H., 1995, Light Met. Age, Oct. 6
- Martin R., 2000, J. Met., 52, 24
- Titanium and Titanium Alloys(Eds: C. Leyens M. Peters) Wiley‐VCH Weinheim2003.
- IMI 834 and TIMETAL 110(Eds: M. Peters C. Leyens W. A. Kaysser) DLR Cologne1994 pp. 11–76.
- R. R. Boyer J. C. Williams N. E. Paton inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg Russia 2000 pp. 1007–1016.
- A. Gilchrist T. M. Pollock inStructural Intermetallics(Eds: K. J. Hemker D. M. Dimiduk) TMS Warrendale PA2001 pp. 3–12.
- A. Vassel J. Y. Guedou inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg2000 pp. 1017–1026.
- U. Rieck inAdvanced Aerospace Materials(Eds: M. Peters W. A. Kaysser) DGLR Bad Godesberg2001 pp. 213–219.
Cited by
Items 801–900 of 985
Temperature dependent constitutive plastic flow behaviour of titanium alloy Ti6Al4V
Mehta, K. K. (2023) · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · doi:10.1515/ijmr-2022-0059 · Cited by 1
Kim, K. H., Park, H., Lee, D. J., Kwon, Y. N., Kang, N., & Hong, J.-H. (2023) · Materials · doi:10.3390/ma16134516 · Cited by 1
Modelling and analysis of vertical landing reusable launch vehicle with spring damper
Krishnan, G. L. Y., & Sajikumar, K. S. (2023) · AIP conference proceedings · doi:10.1063/5.0157175 · Cited by 1
Xu, X., Kang, Q., Liu, Y., Li, Z., & Wang, G. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.173464 · Cited by 1
Amin, M. T., & Noor, W. B. (2024) · Future Sustainability · doi:10.55670/fpll.fusus.2.2.2 · Cited by 1
Ozan, S. (2024) · Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi · doi:10.54365/adyumbd.1395281 · Cited by 1
Pragatheswaran, T., Rajakumar, S., & Balasubramanian, V. (2024) · Welding International · doi:10.1080/09507116.2024.2392665 · Cited by 1
Giridharadhayalan, M., Ramkumar, T., & Selvakumar, M. (2024) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/09544089241277692 · Cited by 1
Burgos, N., & Martín, J. M. P. (2025) · Materials science forum · doi:10.4028/p-xc4a2x · Cited by 1
Subedi, U., Nele Moelans, B., Tański, T., & Kunwar, A. (2025) · Computational Materials Science · doi:10.1016/j.commatsci.2025.113875 · Cited by 1
Phase Relationship in the Ho–Sn–Ti ternary system close to the Ho–Ti side at 1000 °C
Gong Guanhua, C. X. (2025) · Academic Journal of Materials & Chemistry · doi:10.25236/ajmc.2025.060203 · Cited by 1
Signor, F., Alves, S. N., de Lima, D. D., Bevilaqua, W. L., Mareze, P. H., & Daudt, N. D. F. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-11536-4 · Cited by 1
“Titanium and its alloys have been widely used in the biomedical and aerospace industries due to their high strength-to-weight ratio and excellent corrosion resistance (Ref 1, 2).”
Chen, Y. T., Hu, S., Wang, L., Lu, L., Zhang, N. B., Cai, Y., & Luo, S. (2025) · Journal of Applied Physics · doi:10.1063/5.0266620 · Cited by 1
Pushin, V. G., Rasposienko, D. Y., Gornostyrev, Y. N., Kuranova, N. N., Makarov, V. V., Markin, A. A., Naimark, O. B., Balakhnin, A. N., Uksusnikov, A. N., & Ustyugov, Y. M. (2025) · The Physics of Metals and Metallography · doi:10.1134/s0031918x25600733 · Cited by 1
“GTD subassemblies, made of titanium alloys, experience during operation cyclic loads and should have high fatigue strength and durability [8, 9].”
Lou, J. (2015) · Research Commons (University of Waikato) · Cited by 1
Alsalla, H. H. (2017) · Figshare · Cited by 1
Edin, E. (2019) · DiVA (Digitala Vetenskapliga Arkivet) · Cited by 1
Odetola, P. I., Popoola, A. P. I., Ajenifuja, E., & Popoola, O. (2020) · doi:10.21203/rs.3.rs-19369/v1 · Cited by 1
“Primarily, titanium is considered an ideal aerospace material due to its high strength-to-weight ratio, lightweight, corrosion-resistant, and substantial thermal stability [1-4].”
BackgroundZhang, Y. (2022) · theses.fr (ABES) · doi:10.70675/36d7244ez644bz43abz8fbaz833783a8de1b · Cited by 1
Applications of Atomic Layer Deposition in modern Materials Science
Rath, J. (2024) · reposiTUm (TU Wien) · doi:10.34726/hss.2024.124230 · Cited by 1
An Exploratory Study on the Adoption of Additive Manufacturing Technologies by Space Organisations
Mendes, R. A. D. L. R. (2022) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/ja8c-rc54 · Cited by 1
Chapter 10: C-M-P – TRIP/TWIP & stress-induced behaviour
IOM3 (2024) · doi:10.7490/f1000research.1119893.1 · Cited by 1
Processamento de ligações γ-TiAl/ Ti6Al4V por brasagem por difusão com recurso a multifolhas Al/Cu
Costa, M. D. F. G. D. (2012) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 1
Ozkutuk, M. (2018) · Dspace Repository (Marmara Üniversitesi) · Cited by 1
A self-optimized Ti alloy with superior mechanical properties at wide temperature rangePreprint
zhang, K., Yin, Y. J., Xu, R., Li, Y., Liu, S., Zhang, M., & Huang, H. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6217199 · Cited by 1
Lajili, M. (2019) · theses.fr (ABES) · doi:10.70675/178bc9dbz07d2z4cb7zb189z07aef1d462db · Cited by 1
Cavé, K. (2023) · theses.fr (ABES) · doi:10.70675/db311188z45b6z41dfzb47ez9a438bc65dc3 · Cited by 1
GONDRO, J., Błoch, K., Nabiałek, M. G., Dośpiał, M. J., Szota, M., Bukowska, A., & Pietrusiewicz, P. (2014) · Inżynieria Materiałowa
Joost, W. J. (2015) · University Libraries (University of Maryland) · doi:10.13016/m2v928
“This unique set of properties enables use in applications as varied as jet engines [3], artificial hip joints [4], offshore oil drilling equipment [5], and suspension components for the Spirit and Opportunity Mars rovers [6].”
BackgroundStability of α Phase in Ti Alloys Containing Al or Zr from First-Principles Calculations
Zhou, Z. B., Kou, H., Xue, X. Y., Chang, H., Zhang, L. J., & Li, J. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.634-638.1831
Fatigue Damage Mechanism of Titanium in Inert Environments
Zahari, N. I., Yussof, H., & SUGANO, M. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.225.225
“The use of titanium on commercial and military aircraft has continued to increase steadily in recent years [9-11].”
BackgroundStella, P. (2016) · Unitn-eprints PhD (University of Trento) · doi:10.15168/11572_369124
Jastrzębska, A., Suresh, K. S., Kitashima, T., Yamabe‐Mtari, Y., & Pakieła, Z. (2016) · Wiley eBooks · doi:10.1002/9781119296126.ch42
Mahamood, R. M., & Akinlabi, E. T. (2017) · International Conference on Mechanics, Materials and Structural Engineering (ICMMSE) · doi:10.2991/icmmse-17.2017.17
Effect of Oxygen Content on the Phase Transformation of Ti-5Al-2.5Fe Alloy During Continuous Cooling
Kim, D.-H., Won, J. W., Jeong, D.-W., Lee, H.-S., Yoon, S.-Y., & Hyun, Y. (2017) · 대한금속재료학회지 · doi:10.3365/kjmm.2017.55.9.600
Kejanlı, H., Keskin, M. S., & Bingöl, S. (2019) · DÜMF Mühendislik Dergisi · doi:10.24012/dumf.509385
Fatoba, O. S., Akinlabi, S. A., Akinlabi, E. T., & Mwema, F. M. (2019) · IEEE International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) · doi:10.1109/icmimt.2019.8712026
Pressure Actuated Cellular StructuresPreprint
Pagitz, M. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1901.10829
“The first titanium alloys [230] were developed at the end of the 1940s.”
BackgroundLaquai, R., Müller, B. R., Kasperovich, G., Requena, G. C., & Bruno, G. (2018) · elib (German Aerospace Center)
Investigation on Metallographic Analysis of Electron Beam Ti6Al4V Alloy Welds
Chowdhury, S., Nirsanametla, Y., & Muralidhar, M. (2019) · Lecture notes on multidisciplinary industrial engineering · doi:10.1007/978-981-32-9072-3_11
Optimizing technological parameters of drawing for Ti-6Al-4V filament manufacturing
Popelyukh, A. I., Tyurin, A. G., Ruktuev, A. A., Смирнов, А. И., & Rashkovets, M. (2019) · AIP conference proceedings · doi:10.1063/1.5132151
Effects of Graphite Particles in Titanium Metal Matrix Developed by Spark Plasma Sintering Process
Vardhan, T. V., Marichamy, S., Kumar, S. S., & Babu, B. S. (2019) · Lecture notes in mechanical engineering · doi:10.1007/978-981-32-9931-3_26
Ghanmi, O. (2019) · Espace ÉTS (ETS)
Habib, K., Nishikawa, H., & Furuya, Y. (2019) · The Proceedings of the Materials and Mechanics Conference · doi:10.1299/jsmemm.2019.os0305
Ma, X. (2020) · Hiroshima University Institutional Repository
Optimization of Machining Process Parameters on Titanium Grade 9 using Taguchi Method
Raghavendra, M. J. (2020) · International Journal of Engineering Research and · doi:10.17577/ijertv9is070600
“[3] investigated the high-speed milling of Ti-3Al-4V using uncoated K10 carbide.”
BackgroundRico, V. S. (2020) · El Repositorio Academico Digital de la UANL (Universidad Autónoma de Nuevo León)
Sofinowski, K. (2019) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-7262
Gutierrez, M. L. (2020) · scholarworks - UTEP (The University of Texas at El Paso)
Metodika základních technologických zkoušek omílacích technologií
Dvořák, D. (2020) · Cvut DSpace (Czech Technical University)
High-temperature oxidation resistant coating concepts for γ-TiAl based alloys
Kagerer, S. (2021) · reposiTUm (TU Wien) · doi:10.34726/hss.2021.58059
Sharma, A. (2020) · Arizona State University Library Digital Repository (Arizona State University)
Shih, A. J., Tai, B. L., & Li, R. (2019) · Springer eBooks · doi:10.1007/978-3-030-26047-7_1
Influence of Hydrogenation on Residual Stresses in Oxygen-Implanted Ti-6Al-4V Alloy
Nsengiyumva, S., Ntsoane, T. P., Topić, M., & Pichon, L. (2018) · Materials research proceedings · doi:10.21741/9781945291678-25
The Bonding of Additive Manufactured Ti-6Al-4V via the Powder Interlayer Bonding (PIB) Process
Davies, P. W., Davies, H., & Marchisio, S. (2020) · MATEC Web of Conferences · doi:10.1051/matecconf/202032104041
Belov, M. P., & Sinyakov, R. I. (2022) · Physics of the Solid State · doi:10.21883/ftt.2022.08.52682.362
Chausov, M. G., Pylypenko, A., Maruschak, P. O., Brezinová, J., Brezina, J., & Konovalenko, І. V. (2022) · Materials · doi:10.3390/ma15165718
Makhetha, W. M., Haar, G. M. T., Sacks, N., & Becker, T. H. (2023) · Lecture notes in production engineering · doi:10.1007/978-3-031-15602-1_52
Tsoeunyane, G. M., Mathe, N., Tshabalala, L., & Makhatha, M. (2023) · Research Square · doi:10.21203/rs.3.rs-3127764/v1
Design and modal analysis of fs-laser turning module
Chen, Y., Hu, M., Li, C., Song, T., Yin, X., Li, Q., & Su, W. (2023) · International Conference on Laser, Optics and Optoelectronic Technology (LOPET) · doi:10.1117/12.2690259
In Situ SEM Compression Study on Micro-mechanical Behavior of Electron Beam Melted Ti-6Al-4V Alloy
Li, Z., & Yan, Y. (2023) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2553/1/012070
Issues with tensile testing of additively manufactured coarse-grained titanium alloy components
Kalashnikov, K. N. (2023) · AIP conference proceedings · doi:10.1063/5.0169804
Huang, P., Zhou, Q., Guo, N., Yan, Z., Zhou, Q., Zhang, H., & Tang, B. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4644276
A 3D-Printed Monolithic Inline Filter Fabricated With Titanium Alloy
Mostaani, A., Skaik, T. F., Mohamed, A. E.-M. A., Attallah, M. M., Booth, P., Miquel-España, C., & Wang, Y. (2023) · SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC) · doi:10.1109/imoc57131.2023.10379785
“Ti64 is a high strength alloy with excellent corrosion resistance [9].”
BackgroundCrystal plasticity based modelling and high cycle fatigue life prediction for bi-lamellar Ti-6Al-4V
Zhao, Y., Li, Y., Tang, K., Ferro, P., & Berto, F. (2024) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2692/1/012034
“Titanium alloy Ti-6Al-4V, as a dual-phase alloy, is widely used in aerospace and marine fields as one of the most popular advanced engineering materials, due to its high strength, excellent ductility, and fatigue resistance[1-3].”
BackgroundMechanical Alloying of Magnesium and Titanium Alloys
Kanakannavar, S., Shahapurkar, K., Kanaginahal, G. M., Mahale, R. S., & Kakkamari, P. P. (2024) · Advances in chemical and materials engineering book series · doi:10.4018/978-1-6684-9385-4.ch005
EFFECT OF SURFACE MODIFICATION BY NITROGEN AND OXYGEN ON MECHANICAL PERFORMANCE OF Zr-1%Nb ALLOY
Trush, V. S., Стоев, П. И., Fedirko, V. М., Tikhonovsky, М. А., Pohrelyuk, I., Luk’yanenko, A. G., Лаврись, С. М., Stetsko, A. E., Korendiy, V., & Butrynskyi, I. Z. (2024) · doi:10.46813/2024-150-096
Zhang, H., Zai, L., & Xue, X. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4829870
Göv, K., & Kalak, M. (2024) · Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi · doi:10.17341/gazimmfd.1261067
The principles of manufacturing complex carbide compounds based on titaniumPreprint
Shapoval, O., Kulynych, V. D., Марков, О., Kukhar, V. V., & Savchenko, I. V. (2024) · Research Square · doi:10.21203/rs.3.rs-4420724/v1
Akhonin, S. V., Bilous, V. Y., Severyn, A. Y., Selin, R. V., & Petrichenko, I. K. (2024) · Sovremennaâ èlektrometallurgiâ · doi:10.37434/sem2024.02.07
Fatoba, O. S., & Jen, T. (2024) · IEEE International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) · doi:10.1109/icmimt61937.2024.10586016
“Adding alloying components, treating materials, and developing composites will be necessary to improve the mechanical properties [11].”
BackgroundEffect of Heat Treatment on Wear Resistance of Cold-Sprayed Ti-Diamond Composite CoatingPreprint
Li, W., Zhou, H., & Wang, C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4894141
Li, J., Liu, S., Xia, C., Xu, H., Cai, J., Xiao, W., Huang, X., & Ma, C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4899163
Akhonin, S. V., Bilous, V. Y., Severyn, A. Y., Selin, R. V., & Petrichenko, I. K. (2024) · The Paton Welding Journal · doi:10.37434/tpwj2024.06.06
Development of ANFIS Predictive Model for Additive Manufacturing of TPU Material
Pasupuleti, T., Natarajan, M., Palanisamy, D., Gnanarathinam, A., Umapathi, D., & Kiruthika, J. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-28-0025
Design and preparation of Ti-6Al-1.7Fe-0.1Si-7.3Cr alloy with excellent tensile properties
Liu, C., Tang, Y., Cai, A., Ding, C., Li, W., Yuan, Y., Wang, A., Guo, W., Yan, X., & Gao, L. (2024) · Materials Science and Engineering A · doi:10.1016/j.msea.2024.147635
Mechanically Driven Reconstruction of Materials at Sliding Interfaces to Control Wear
Shirani, A. (2022) · University of North Texas Digital Library (University of North Texas) · doi:10.12794/metadc1944273
Biyolojik Olarak Parçalanabilen Çinko Esaslı Malzemelerdeki En Son Gelişmeler
Tutas, G. G. (2024) · Bidge Yayınları eBooks · doi:10.70269/10.70269/7319692375
Experimental investigation and thermodynamic optimization of the Ni–Ta–Ti system
Liang, K., Shen, L., Guo, C., Li, C., & Du, Z. (2025) · Calphad · doi:10.1016/j.calphad.2025.102803
Pradeep, P. I., Kumar, V. A., Senthil, P., Kovalchuk, D., & Roy, A. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-11173-x
“Titanium alloys are primary choice for such critical applications and Ti6Al4V is the most preferred alloy (Ref 5, 29).”
Kobayashi, S., Kobayashi, M., Nakae, T., & Okano, S. (2025) · Key engineering materials · doi:10.4028/p-e0a0px
Pakkathillam, J. K., Haack, J., & Zoughi, R. (2025) · IEEE Open Journal of Instrumentation and Measurement · doi:10.1109/ojim.2025.3580117
“This is because Ti64 alloy possesses high tensile strength (up to 1200 MPa) and material density of ∼ 4.43 g/cm 3 with an elongation propensity of up to 16% [5], [6].”
InfluentialKullo, V., Vikram, K. A., Ramya, P., Praveen, A. M. V., & Kanth, T. V. K. (2025) · Engineering Research Express · doi:10.1088/2631-8695/ade654
Kim, W. H., Kim, S., Hajra, R. N., Roy, G., & Kim, J. H. (2025) · Powder Metallurgy · doi:10.1177/00325899251348352
Nanofillers: Challenges in Aerospace Industry
Karami, R., & Fattahi, H. (2025) · Springer eBooks · doi:10.1007/978-981-96-2407-2_146
Influence of Powder Size on Microstructure and Wear Resistance of Cold-Sprayed Ti-6Al-4V
Seng, D. H. L., Sim, R. K., Tan, X., Zhang, Z., Ba, T., Meng, T. L., Teo, S. L., Zhang, Z., & Pan, J. (2025) · Journal of Thermal Spray Technology · doi:10.1007/s11666-025-02056-7
“…versus spherical (Ref 26, 30 )) and heat treatment (Ref Ti-6Al-4V (Ti64) is a titanium alloy possessing versatile applications in aerospace (Ref 39, 40), marine (Ref 41, 42), automotive (Ref 43) and biomedical (Ref 44, 45) industries due to its superior high strength-to-weight ratio, excellent…”
Liu, G., Shan, L., Gu, T., Han, M., Wang, T., Tang, J., & Zhang, Z. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5408054
Evaluation of adhesive performance under cryogenic conditions for composite tanks
Kaveh, A., Razzaghi, A., Dalir, M., & Jafari, M. (2025) · Aerospace Systems · doi:10.1007/s42401-025-00390-w
Chumaevskii, A. V., Черемнов, А. М., Semenchuk, V. М., Gurianov, D. A., Metzler, E. S., & Kolubaev, E. A. (2025) · Russian Physics Journal · doi:10.1007/s11182-025-03547-4
“A wide application of titanium and aluminum alloys in aviation, transport and aerospace industries is due to their high strength properties and low density [1, 2].”
Influence of Heating Media on Mechanical and Microstructural Properties of CP Titanium Alloy
Mermer, E., Evcimen, N., & Çinici, H. (2025) · Gazi Üniversitesi Fen Bilimleri Dergisi Part C Tasarım ve Teknoloji · doi:10.29109/gujsc.1753596
Luo, H., Hao, D. E. N. G., Yuan, W., XIANG, W., Li, C., Wei-dong, Y. I. N., Yin, H. Y., Xu, Z. F., & Cao, S. (2025) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(25)66858-0
Microstructure and high-temperature mechanical properties of high-temperature titanium alloys
Yamabe‐Mitarai, Y. (2025) · Journal of Japan Institute of Light Metals · doi:10.2464/jilm.75.306
RESEARCH PROGRESS ON THE PLASTICITY OF LASER WIRE-FED WELDED TITANIUM ALLOY JOINTS
Lv, X., Xing, Z., & Fu, H. (2025) · Surface Review and Letters · doi:10.1142/s0218625x26300030
Residual Stresses in a Novel Dual-Phase Ti-6.5Mo-2.5Cr-2V-2Nb-1Sn-1Zr-4Al Alloy
Wang, Y., Wang, H., Jiang, Y., Li, H., Ma, Z., Feng, Y., Shi, Z., Ma, Z., Zhang, H., & Zhang, W. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-12907-7
Metadata
- Authors
- Peters, M., Kumpfert, J., Ward, C. H., & Leyens, C.
- Affiliations
- Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) (DE)
- United States Air Force Research Laboratory (US)
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2003-06-26
- Volume
- 5
- Issue
- 6
- Pages
- 419-427
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2140565038
- Cited by
- 894
- References
- 8
- Citations by year
- 2026: 74 · 2025: 96 · 2024: 107 · 2023: 83 · 2022: 84 · 2021: 89 · 2020: 79 · 2019: 85 · 2018: 64 · 2017: 37 · 2016: 19 · 2015: 16 · 2014: 17 · 2013: 16 · 2012: 7
- FWCI
- 0.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- elib (German Aerospace Center) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Titanium Alloys Microstructure and Properties
- Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- titanium alloys, aerospace applications, specific strength, corrosion resistance, aircraft airframe, aircraft engines, helicopters, space applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.