Titanium Alloys for Aerospace Applications
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
There is probably no other material more closely related to aerospace than titanium and its alloys. With a density of 4.5g/cm 3 , titanium alloys are only about half as heavy as steel or Ni‐based superalloys, yielding an excellent strength‐to‐weight ratio. Furthermore, they have exceptional corrosion resistance. The use of titanium alloys in the aerospace sector will be highlighted including airframe, engine, helicopter, and space applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An overview on the use of titanium in the aerospace industry
Boyer, R. R. (1996) · Materials Science and Engineering: A · doi:10.1016/0921-5093(96)10233-1 · Cited by 2,442
Processing and Applications of Intermetallic γ-TiAl-Based Alloys
Clemens, H., & Kestler, H. (2000) · Advanced Engineering Materials · doi:10.1002/1527-2648(200009)2:9<551::aid-adem551>3.0.co;2-u · Cited by 596
Recent Progress in the Development of Gamma Titanium Aluminide Alloys
Appel, F., Brossmann, U., Christoph, U., Eggert, S., Janschek, P., Lorenz, U., Müllauer, J., Oehring, M., & Paul, J. D. H. (2000) · Advanced Engineering Materials · doi:10.1002/1527-2648(200011)2:11<699::aid-adem699>3.0.co;2-j · Cited by 399
Gamma titanium aluminides as prospective structural materials
Loria, E. A. (2000) · Intermetallics · doi:10.1016/s0966-9795(00)00073-x · Cited by 391
An overview of monolithic titanium aluminides based on Ti3Al and TiAl
Djanarthany, S., Viala, J.-C., & Bouix, J. (2001) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(01)00328-5 · Cited by 293
Titanium Aluminides - An Overview
Lipsitt, H. A. (1984) · MRS Proceedings · doi:10.1557/proc-39-351 · Cited by 156
Ward, C. H. (1993) · International Materials Reviews · doi:10.1179/imr.1993.38.2.79 · Cited by 73
Self-citationAlternate materials choices—some challenges to the increased use of Ti alloys
Williams, J. C. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(98)01179-4 · Cited by 56
Ward, C. H. (1993) · International Materials Reviews · doi:10.1179/095066093790101770 · Cited by 41
Self-citation
Research works printed but not linked: 12
- P.‐J. Winkler M. A. Däubler M. Peters inTitanium ’92: Science and Technology TMS Warrendale PA1993 pp. 877–2890.
- M. Peters R. Braun in4th European Conf. on Adv. Mater. and Processes – EUROMAT 95 Associazione Italiana di Metallurgia Milano1995 pp. 55–64.
- D. Eylon S. R. Seagle inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg2000 pp. 37–41.
- Peters M., 1995, Titanium World, 2, 15
- Froes F.H., 1995, Light Met. Age, Oct. 6
- Martin R., 2000, J. Met., 52, 24
- Titanium and Titanium Alloys(Eds: C. Leyens M. Peters) Wiley‐VCH Weinheim2003.
- IMI 834 and TIMETAL 110(Eds: M. Peters C. Leyens W. A. Kaysser) DLR Cologne1994 pp. 11–76.
- R. R. Boyer J. C. Williams N. E. Paton inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg Russia 2000 pp. 1007–1016.
- A. Gilchrist T. M. Pollock inStructural Intermetallics(Eds: K. J. Hemker D. M. Dimiduk) TMS Warrendale PA2001 pp. 3–12.
- A. Vassel J. Y. Guedou inTitanium ’99: Science and Technology CRISM “Prometey” St. Petersburg2000 pp. 1017–1026.
- U. Rieck inAdvanced Aerospace Materials(Eds: M. Peters W. A. Kaysser) DGLR Bad Godesberg2001 pp. 213–219.
Cited by
Items 701–800 of 985
Fatoba, O. S., Akinlabi, S. A., & Akinlabi, E. T. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.07.150 · Cited by 3
Gushchina, M. O., Carstensen, T., Maier, H. J., & Hassel, T. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.01.524 · Cited by 3
Poquillon, D., Parrens, C., Pugliara, A., Perrais, M., & Malard, B. (2020) · MATEC Web of Conferences · doi:10.1051/matecconf/202032106009 · Cited by 3
Pragatheswaran, T., Rajakumar, S., & Balasubramanian, V. (2022) · Journal of Manufacturing Engineering · doi:10.37255/jme.v17i3pp080-086 · Cited by 3
Caudill, J. R. (2019) · UKnowledge (University of Kentucky) · doi:10.13023/etd.2019.127 · Cited by 3
“1 Material Information and Experimental Methodology Titanium alloys, particularly Ti-6Al-4V [5], are ideal material choices for aerospace applications due to their unique combination of high strength at elevated temperatures, low weight, and suitable thermo-mechanical properties [21, 112].”
Backgrounddu Preez, S. (2019) · Boloka Institutional Repository (North-west University) · Cited by 3
Garcia, M. (2019) · theses.fr (ABES) · doi:10.70675/08f5f9ffz53b8z455bzb583zf6d87897e084 · Cited by 3
Tensor-on-tensor Regression Neural Networks for Process Modeling with High-dimensional DataPreprint
Wang, Q., Bisheh, M. N., & Paynabar, K. (2025) · arXiv (Cornell University) · doi:10.48550/arxiv.2510.05329 · Cited by 3
“Ti-6Al-4V is a type of titanium alloy that is ideal for mechanical components in aerospace due to its high specific strength, corrosion and erosion resistance, high fatigue strength (Peters et al., 2003).”
Buesa, A., Luis, P., Piñero, P., Rueda-Cantuche, J. M., & Baldassarre, B. (2024) · Econstor (Econstor) · Cited by 3
New preparation of ceramic coatings by low-pressure plasma spray
Song, C. (2018) · theses.fr (ABES) · doi:10.70675/b64808e5z0373z448dz9ec4zcbc97e516deb · Cited by 3
Sasaki, L. (2018) · theses.fr (ABES) · doi:10.70675/561a9520za567z436fz8034zb22056ceec4e · Cited by 3
In-Situ SEM Investigation of the Fatigue Behavior of Additive Manufactured Titanium Alloys
Wang, X., Zhao, Y., Wei, L., & Guan, X. (2021) · Lecture notes in civil engineering · doi:10.1007/978-3-030-64908-1_57 · Cited by 2
Structural analysis and comparison of components of oil filter
Gupta, S., & Babu, T. N. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.07.321 · Cited by 2
RAHUL, CHOUDHARY, R., Debnath, P., & Kumar, P. (2023) · Surface Review and Letters · doi:10.1142/s0218625x24500379 · Cited by 2
Wiegand, M., Loose, J.-S. W. F., Kahlmeyer, M., Song, W., & Böhm, S. (2025) · Welding in the World · doi:10.1007/s40194-025-02039-w · Cited by 2
Pourrahimi, S., Milanese, J., Habibnejad-Korayem, M., Bocher, P., & Hof, L. A. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01319-7 · Cited by 2
“These properties include key factors such as corrosion resistance, which is vital for applications in biomedical [23, 24] and aerospace [25], as well as mechanical properties [26, 27].”
Guo, X., Zhang, J., Kong, T., Shen, J., Liu, Q., Sun, C., & Li, P. (2025) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-025-01927-w · Cited by 2
Reorientation-induced plasticity tuned by varying oxygen content in martensitic titanium alloys
Nam, Y.-W., Kim, J. H., Yeom, J., Hong, J., Lee, J. I., & Lee, S. W. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.184782 · Cited by 2
Liu, C., Chen, L., Ye, J., Meng, Z., Yang, W., Wei, X. F., Ding, Q., Bei, H., Zhang, Y., & Zhang, Z. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.184893 · Cited by 2
Effect of Cryo-Rolling on the Microstructural Evolution and Mechanical Properties of Ti-6Al-4V Alloy
Gaur, V., Vashishtha, P., Sahoo, B. K., Bandari, R. K., & Das, R. K. (2025) · Materials · doi:10.3390/ma18235296 · Cited by 2
“Additionally, its low thermal conductivity and high melting point make it ideal for the aerospace sector [20,21], including critical structural components, jet engine parts [22], and landing gear elements [23].”
Akçay, S. B., Varol, T., Aksa, H. C., Beder, M., Güler, O., Erdemir, F., & Kocaman, M. (2025) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2025-0130 · Cited by 2
Schaal, H., Castany, P., & Gloriant, T. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.187243 · Cited by 2
Chen, G. Q., Wang, Z., Li, Z., Chang, X., Chen, Q., Xia, C., Wang, Y., & Qi, Y. (2026) · Materials Science and Engineering A · doi:10.1016/j.msea.2026.150115 · Cited by 2
Yu, Y., Chen, L., Oliveira, J. P., Wu, J., Teshome, F. B., Zhao, M., Shen, J., Guo, W., & Zeng, Z. P. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.03.181 · Cited by 2
Li, M., Liu, D., Zhang, X., Zhou, K., Liu, Y., Wu, J., & Yang, Z. (2026) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2026.133468 · Cited by 2
Yasmeen, T., Ahn, J., & Shao, Z. (2026) · Materials Science and Engineering A · doi:10.1016/j.msea.2026.150312 · Cited by 2
Kurkin, E. I., Chertykovtseva, V., & Sedelnikov, A. V. (2026) · Technologies · doi:10.3390/technologies14050275 · Cited by 2
Razzak, A., Wang, S., Xue, W., Gao, S., Wu, B., & Duan, D. (2026) · Tribology International · doi:10.1016/j.triboint.2026.112195 · Cited by 2
Titanium, Stainless Steel and Cobalt-chromium-based Alloys: Classification and Diverse Applications
Makuochukwu, O., & Ilemona, A. (2026) · International Journal of Materials Science and Applications · doi:10.11648/j.ijmsa.20261503.13 · Cited by 2
RamReddy, C., & Saran, H. L. (2023) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/09544089221148586 · Cited by 2
“The detailed applications of Ti and its alloys in the fi eld of aerospace sector have been explained by Peters et al. 3 and Singh et al. 4 The porous medium is a solid matrix with voids.”
BackgroundMurali, A., & Velu, M. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ada2dd · Cited by 2
The fatigue performance of titanium alloys joined via the powder interlayer bonding method
Davies, P. W., Johal, A., Davies, H., & Marchisio, S. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05737-5 · Cited by 2
The Bonding of Additive Manufactured Ti-6Al-4V via the Powder Interlayer Bonding (PIB) Process
Davies, P. W., Davies, H., & Marchisio, S. (2020) · MATEC Web of Conferences · doi:10.1051/matecconf/202032104022 · Cited by 2
“Titanium alloys are widely utilised in the gas turbine, often contributing more than 25% of an engines total weight[10].”
BackgroundEffect of oxygen contents on strain rate sensitivity of commercially pure titanium
Lee, M.-S., Hyun, Y., & Jun, T. (2020) · MATEC Web of Conferences · doi:10.1051/matecconf/202032104009 · Cited by 2
Homogenized model of environmental barrier coatings for evaluation of energy release rate
Kawai, E., Kubo, A., & Umeno, Y. (2021) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13724 · Cited by 2
Development of a Novel Approach to Predict Tool Life Based on Tool Path Features in Ta6V Milling
Lagarde, Q., Wagner, V., Dessein, G., & Couderc, P. (2022) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4054298 · Cited by 2
Gong, H., Fan, Q., Zhang, H., Wang, D., Yu, H. Y., Yang, L., Zhu, X., & Wang, L. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.112258 · Cited by 2
Tribological behavior of the electron beam additive manufactured Ti6Al4V-Cu alloy
Nikolaeva, A., Zykova, A. P., Chumaevskii, A. V., Vorontsov, A. V., Олегович, К. Е., Nikonenko, A. V., & Tarasov, S. Y. (2023) · Letters on Materials · doi:10.22226/2410-3535-2023-2-158-163 · Cited by 2
Processing of titanium alloys by mechanical alloying
Cao, P., Jena, K. D., & Xu, D. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-16151-3.00009-9 · Cited by 2
Jung, S., Kim, Y.-C., Lee, D., & Choi, J.-H. (2024) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-024-01112-6 · Cited by 2
Pragatheswaran, T., Rajakumar, S., & Balasubramanian, V. (2024) · The Physics of Metals and Metallography · doi:10.1134/s0031918x22600580 · Cited by 2
“The nature of titanium has high affinity to oxygen at elevated temperatures which leads to high oxidation [3–6].”
Liang, F., Yang, E., Jia, N., Li, W., Xiaolian, Z., & Yang, R. (2025) · Materials · doi:10.3390/ma18081825 · Cited by 2
“…properties of titanium alloys, including high specific strength, exceptional corrosion resistance, and high-temperature oxidation resistance, are fully utilized in a multitude of fields, including aerospace, defense, marine engineering, chemical processing, and biomedical materials [1–4].”
Texture Effects in Important Aerospace Materials
Wanhill, R. J. H. (2016) · Indian Institute of Metals series · doi:10.1007/978-981-10-2143-5_7 · Cited by 2
Belov, M. P., & Sinyakov, R. I. (2022) · Physics of the Solid State · doi:10.1134/s1063783422060014 · Cited by 2
Microstructural Formation Mechanism of α+β Dual Phase Ti-Fe Sintered Alloys via Hot Rolling Process
Kariya, S., Tanaka, T., Umeda, J., Yang, Y., Li, S., Khantachawana, A., Bahador, A., & Kondoh, K. (2024) · Journal of the Japan Society of Powder and Powder Metallurgy · doi:10.2497/jjspm.23-00078 · Cited by 2
Very High Cycle Fatigue and Damage Behavior of Ti6Al4V
Heinz, S., & Eifler, D. (2015) · Key engineering materials · doi:10.4028/www.scientific.net/kem.664.71 · Cited by 2
“Due to properties, like high specific strength and excellent corrosion behavior, titanium alloys are widely used for aerospace applications [1].”
BackgroundResource Efficient Process Chain Development of a Modular CubeSat Spaceframe
Oberholzer, J. F., Uheida, E. H., & Oosthuizen, G. A. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.037 · Cited by 2
“The first component to be manufactured from titanium was the compressor blades, with the compressor disks being introduced next, and the large front fan blades of modern jet engines are now often made from titanium alloys too [51].”
BackgroundInfluentialИсследование прочности титанового сплава Ti-6Al-4V в условиях ударных и импульсных воздействий
Evstifeev, A. D., Петров, Ю. В., Kazarinov, N. A., & Валиев, Р. Р. (2018) · Physics of the Solid State · doi:10.21883/ftt.2018.12.46719.132 · Cited by 2
Li, F., Zhang, X., Jiang, Y., Yang, L., Qi, C., & Sun, B. (2019) · Applied Sciences · doi:10.3390/app9081569 · Cited by 2
Gao, Z. T. (2019) · Journal of Mechanical Engineering · doi:10.3901/jme.2019.07.249 · Cited by 2
The mechanical properties and high-temperature wear behavior of AlCrN coating on the TA15 alloy
Yi, J., Miao, Q., Liang, W., Ding, Z. Y., Wang, X., Lin, H., Qi, Y., & An, H. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab5124 · Cited by 2
Kwame, J. S., Yakushina, E., & Blackwell, P. L. (2020) · Journal of Materials and Applications · doi:10.32732/jma.2020.9.1.32 · Cited by 2
Lopez-Castaño, S., Emile, P., Archambeau, C., Pettinari‐Sturmel, F., & Douin, J. (2021) · The minerals, metals & materials series · doi:10.1007/978-3-030-65261-6_16 · Cited by 2
Qi, Y., Ma, W., Zhuang, X. Q., Bai, Y., Huang, J., Wang, R., Bao, M., & Zheng, X. (2021) · Journal of Thermal Spray Technology · doi:10.1007/s11666-021-01273-0 · Cited by 2
Shinde, P. S., Peng, Y., & Reddy, R. G. (2022) · The minerals, metals & materials series · doi:10.1007/978-3-030-92381-5_8 · Cited by 2
Technology of Holes Strengthening by Pneumo-Impulse Hole Mandrelling
Voronko, V., Dyachenko, Y., Voronko, I., Zastela, O., & Myronova, S. (2023) · Lecture notes in networks and systems · doi:10.1007/978-3-031-36201-9_1 · Cited by 2
Guimarães, R. P. M. (2018) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.18.2018.tde-15032018-082818 · Cited by 2
Laurin, D. (2010) · Carleton University's Institutional Repository (MacOdrum Library, Carleton University) · doi:10.22215/etd/2010-08831 · Cited by 2
Lambert, R. (2021) · theses.fr (ABES) · doi:10.70675/42c7f996zd859z4be7zb9d1zad3c9bf21c8b · Cited by 2
Onuike, B. (2019) · Research Exchange (Washington State University) · Cited by 2
Laure, W. (2014) · theses.fr (ABES) · doi:10.70675/d5266d4ez85edz492fzb790zed6791ce1f24 · Cited by 2
Cheng, W. (2019) · theses.fr (ABES) · doi:10.70675/10370c8czc903z4674zb176z20cf00af2698 · Cited by 2
Hamma, J. (2020) · theses.fr (ABES) · doi:10.70675/703cd028z840az478azadf5z5318c4bd6feb · Cited by 2
Ramli, A., Sharif, S., Said, A. Y. M., Yusop, M. I. M., Karim, Z., & Mohruni, A. S. (2019) · AIP conference proceedings · doi:10.1063/1.5118040 · Cited by 1
Aeronautical and Space Textiles
Abbasi, S. A., Wang, L., Peerzada, M. H., & Ladani, R. B. (2019) · Wiley eBooks · doi:10.1002/9781119325062.ch14 · Cited by 1
Raju, M., & Rajendran, R. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-09926-1 · Cited by 1
“Additionally, these alloys exhibit excellent resistance to corrosion, even when exposed to elevated service temperatures, further enhancing their suitability for critical aerospace components (Ref 4, 5).”
Hiremath, A. R., Köklü, U., & Bolar, G. (2024) · Springer Proceedings in Materials · doi:10.1007/978-981-97-5963-7_10 · Cited by 1
Nanofillers: Current Research and Challenges in Aerospace Industry
Karami, R., & Fattahi, H. (2024) · Springer eBooks · doi:10.1007/978-981-99-3516-1_146-1 · Cited by 1
Origin of the distinct site occupations of H atom in hcp Ti and Zr/Hf
Yang, F.-X., Zhu, Y.-F., Cao, S., Wang, C., Ma, Y., Yang, R. L., & Hu, Q. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.05.249 · Cited by 1
Effect of Oxygen and Zirconium on Oxidation and Mechanical Behavior of Fully γ Ti52AlxZr Alloys
Kuriš, M., Tsoutsouva, M. G., Thomas, M., Vaubois, T., Sallot, P., Habiyaremye, F., & Monchoux, J. (2025) · Metals · doi:10.3390/met15070745 · Cited by 1
Li, P., Zhang, X., Liu, X., Li, Z., Sun, Z., Hao, J., Pan, J., Li, Z., & Wang, Z. (2025) · Materials · doi:10.3390/ma18163825 · Cited by 1
“These alloys have gradually emerged as key materials to replace traditional high-strength steel and aluminum-based alloys [1–6].”
Creep Behavior and Model Comparison for Ti–6Al–4V Alloy Produced via Electron Beam Powder Bed Fusion
Bruno, M., Esposito, L., di Criscio, I., Borrelli, R., & Franchitti, S. (2025) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-025-07953-8 · Cited by 1
Flow Study of a Power-Law Hybrid Nanofluid Using Spectral Method: Local Non-Similarity Approach
Srivastav, A., & RamReddy, C. (2025) · Proceedings of the National Academy of Sciences India Section A Physical Sciences · doi:10.1007/s40010-025-00943-w · Cited by 1
“Peters et al. [ 23 ] and Singh et al. [ 24 ] have pointed out various applications of these different Titanium alloys in the field of aerospace.”
Li, Z., Xing, S., Fu, Y., Shen, W., Wu, S., Sun, L., Li, Z., & Li, X. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.186513 · Cited by 1
Li, L., Zou, B., Cao, X., Zhang, Y., Wang, Y., Guo, L., & Zhou, L. (2026) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2026.133244 · Cited by 1
Microstructural Formation Mechanism of α+β Dual Phase Ti-Fe Sintered Alloys via Hot Rolling Process
Kariya, S., Tanaka, T., Umeda, J., Yang, Y., Li, S., Khantachawana, A., Bahador, A., & Kondoh, K. (2026) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.mt-y2025009 · Cited by 1
Qiu, F., Chen, B., Gao, Z., Peng, D., Jin, J., Luo, C., Chen, J., Jiang, K., & Gou, G. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3670540 · Cited by 1
“All measurements are performed using the same d 15 -mode transducer with optimized coupling settings (trifunc-tional epoxy resin) [49], [50], [51], [52], [53].”
Liang, B., Sangsongfa, A., & Amdee, N. (2026) · ASEAN Journal of Scientific and Technological Reports · doi:10.55164/ajstr.v29i3.260922 · Cited by 1
“There is probably no material more closely associated with aerospace than titanium and its alloys [2].”
Sustainable machining of LMD-processed Ti64-ELI under nano-fluids MQL conditions
Danish, M. (2026) · The European Physical Journal Special Topics · doi:10.1140/epjs/s11734-026-02306-x · Cited by 1
“Strength was increased by combining Ti with additional alloying elements [9].”
Yong, T. A. N., Mi, G., Pei-jie, L. I., Ya-di, L. I., Yue-hai, Q. I. U., & Ruo-chen, S. U. N. (2026) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(26)67043-4 · Cited by 1
Lin, X., Fan, W., Zhang, H., Liu, J., Zhang, Z., Wu, H. T., & Li, X. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.189245 · Cited by 1
Effect of Oxide Flux Coatings and Post-weld Heat Treatment on CO2 Laser-Welded Ti-6Al-4V Alloy
Ganesan, M. K., Rengarajan, R., Marimuthu, P., & Бабу, П. Д. (2026) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-026-14391-z · Cited by 1
“The region between the green and black separation lines on the etched cross section is significant (Ref 30).”
Joshi, P. S., Mahadule, D., & Khatirkar, R. K. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.191202 · Cited by 1
“The aerospace sector relies extensively on titanium components for airframe structures, compressor blades, and fasteners, where weight savings directly translate to fuel efficiency gains and payload improvements [4,5].”
Siddique, A. B., Zhou, W., Mushtaq, K., & Javed, A. (2026) · Lasers in Manufacturing and Materials Processing · doi:10.1007/s40516-026-00363-7 · Cited by 1
Precipitation induced recrystallisation in a Ti-Fe-Mo bcc-superalloy driven by lattice misfit
Parkes, N., Ma, K., Poole, B., Hardie, C. D., & Knowles, A. J. (2026) · Communications Materials · doi:10.1038/s43246-026-01327-2 · Cited by 1
Zhumabekova, A., Yankin, A., & Perveen, A. (2026) · Manufacturing Letters · doi:10.1016/j.mfglet.2026.07.093 · Cited by 1
Bayesian calibration of crystal plasticity finite element model parameters
Babu, J. R., Karve, P., Mahadevan, S., Nair, K. A., Tak, T. N., & Ghosh, S. (2026) · International Journal of Plasticity · doi:10.1016/j.ijplas.2026.104861 · Cited by 1
Tanveer, A. (2015) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 1
Influence of Powder Flow Rate on Properties of Laser Deposited Titanium Alloy -Ti6Al4V
Mahamood, R. M., & Akinlabi, E. T. (2017) · International Conference on Mechanics, Materials and Structural Engineering (ICMMSE) · doi:10.2991/icmmse-17.2017.18 · Cited by 1
“Ti6Al4V is an important aerospace alloy that is widely used because of its excellent properties [17].”
BackgroundFuture Research Need and in Laser Metal Deposition Process and Summary
Mahamood, R. M. (2017) · Engineering materials and processes · doi:10.1007/978-3-319-64985-6_10 · Cited by 1
Effects of {332}〈113〉 Deformation Twinning on Fatigue Behavior of Ti–Mn System Alloys
Cho, K., Yuki, K., 古畑弘樹, Niinomi, M., & Yasuda, H. Y. (2019) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.me201919 · Cited by 1
Kwame, J. S., Yakushina, E., & Blackwell, P. L. (2021) · The minerals, metals & materials series · doi:10.1007/978-3-030-75381-8_223 · Cited by 1
Effect of α/β Forging on Microstructure and Texture Inhomogeneity in a Ti-1023 Forged Disk
Chen, S., Wang, Y., Liu, X., Mu, J., Liu, C., Huang, L., Nie, Z., & Ren, Y. (2019) · Materials Research · doi:10.1590/1980-5373-mr-2018-0769 · Cited by 1
Spranger, F., Graf, B., Schuch, M., Hilgenberg, K., & Rethmeier, M. (2017) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5138187 · Cited by 1
Srivastava, A., Srivastava, N., & Tripathi, U. N. (2021) · Bulletin of the Chemical Society of Ethiopia · doi:10.4314/bcse.v35i1.5 · Cited by 1
“The high tensile strength, light weight and excellent corrosion resistant make the titanium a useful alloying agent for many parts of highspeed aircraft, motorbikes, ships and missiles [3-5].”
BackgroundImproving Surface Integrity Using Laser Metal Deposition Process
Mahamood, R. M., Akinlabi, E. T., Shukla, M., & Pityana, S. L. (2019) · IGI Global eBooks · doi:10.4018/978-1-5225-9624-0.ch009 · Cited by 1
Thermal process signature in machining of Ti-6Al-4V with worn tools
Thornton, E.-L., & Schoop, J. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.05.201 · Cited by 1
Narushima, T., Suzuki, S., Ueda, K., Bhattacharya, S. K., & Sahara, R. (2022) · ISIJ International · doi:10.2355/isijinternational.isijint-2022-053 · Cited by 1
Titanium-Based Alloys with High-Performance: Design and Development
Krishna, R. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.108748 · Cited by 1
Metadata
- Authors
- Peters, M., Kumpfert, J., Ward, C. H., & Leyens, C.
- Affiliations
- Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) (DE)
- United States Air Force Research Laboratory (US)
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2003-06-26
- Volume
- 5
- Issue
- 6
- Pages
- 419-427
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2140565038
- Cited by
- 894
- References
- 8
- Citations by year
- 2026: 74 · 2025: 96 · 2024: 107 · 2023: 83 · 2022: 84 · 2021: 89 · 2020: 79 · 2019: 85 · 2018: 64 · 2017: 37 · 2016: 19 · 2015: 16 · 2014: 17 · 2013: 16 · 2012: 7
- FWCI
- 0.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- elib (German Aerospace Center) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Titanium Alloys Microstructure and Properties
- Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- titanium alloys, aerospace applications, specific strength, corrosion resistance, aircraft airframe, aircraft engines, helicopters, space applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.