Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
This paper summarizes and reviews the state‐of‐the‐art processing methods, structures and mechanical properties of the metal matrix composites reinforced with ceramic nanoparticles. The metal matrices of nanocomposites involved include aluminum and magnesium. The processing approaches for nanocomposites can be classified into ex‐situ and in‐situ synthesis routes. The ex‐situ ceramic nanoparticles are prone to cluster during composite processing and the properties of materials are lower than the theoretical values. Despite the fact of clustering, ex‐situ nanocomposites reinforced with very low loading levels of nanoparticles exhibit higher yield strength and creep resistance than their microcomposite counterparts filled with much higher particulate content. Better dispersion of ceramic nanoparticles in metal matrix can be achieved by using appropriate processing techniques. Consequently, improvements in both the mechanical strength and ductility can be obtained readily in aluminum or magnesium by adding ceramic nanoparticles. Similar beneficial enhancements in mechanical properties are observed for the nanocomposites reinforced with in‐situ nanoparticles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
Mordike, B. L., & Ebert, T. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01351-4 · Cited by 4,537
Mechanical Alloying And Milling
Suryanarayana, C. (2004) · CRC Press eBooks · doi:10.1201/9780203020647 · Cited by 3,882
Metal matrix composites – From science to technological significance
Miracle, D. B. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.05.027 · Cited by 1,921
Microstructural and mechanical characteristics of in situ metal matrix composites
Tjong, S. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00024-3 · Cited by 1,722
Self-citationNanocrystalline materials and coatings
Tjong, S. C., & Chen, H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.07.001 · Cited by 928
Self-citationChawla, K. K. (2006) · Materials Science and Technology · doi:10.1002/9783527603978.mst0150 · Cited by 825
Sinterable Ceramic Powders from Laser‐Driven Reactions: I, Process Description and Modeling
CANNON, W. R., DANFORTH, S. C., FLINT, J. H., HAGGERTY, J. S., & MARRA, R. A. (1982) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1982.tb10464.x · Cited by 395
Structure and mechanical properties of ultrafine-grained metals
Valiev, R. Z. (1997) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00183-4 · Cited by 376
Mechanical behaviour of laminated metal composites
Lesuer, D. R., Syn, C. K., Sherby, O. D., Wadsworth, J., Lewandowski, J. J., & Hunt, W. H. (1996) · International Materials Reviews · doi:10.1179/095066096790151204 · Cited by 368
Cited by
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Tjong, S. C. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.08.001 · Cited by 1,155
Self-citationMechanically alloyed nanocomposites
Suryanarayana, C., & Al-Aqeeli, N. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.10.001 · Cited by 750
Nanoparticulate Functional Materials
Goesmann, H., & Feldmann, C. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903053 · Cited by 733
Mechanical properties of nanoparticles: basics and applications
Guo, D., Xie, G., & Luo, J. (2014) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/47/1/013001 · Cited by 723
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Bessa, M. A., Bostanabad, R., Liu, Z., Hu, A., Apley, D. W., Brinson, C., Chen, W., & Liu, W. K. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.03.037 · Cited by 573
Interphase Engineering Enabled All-Ceramic Lithium Battery
Han, F., Yue, J., Chen, C., Zhao, N., Fan, X., Ma, Z., Gao, T., Wang, F., Guo, X., & Wang, C. (2018) · Joule · doi:10.1016/j.joule.2018.02.007 · Cited by 467
Copper/graphene composites: a review
Hidalgo-Manrique, P., Lei, X., Xu, R., Zhou, M., Kinloch, I. A., & Young, R. J. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03703-5 · Cited by 393
Bao, Z., Xian, C., Yuan, Q., Liu, G., & Wu, J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900670 · Cited by 383
Developments in the aluminum metal matrix composites reinforced by micro/nano particles – A review
Bhoi, N. K., Singh, H., & Pratap, S. (2020) · Journal of Composite Materials · doi:10.1177/0021998319865307 · Cited by 380
Liu, S., Yu, J.-M., Gan, Y.-C., Qiu, X.-Z., Gao, Z.-C., Wang, H., Chen, S.-X., Xiong, Y., Liu, G.-H., Lin, S.-E., et al. (2023) · Military Medical Research · doi:10.1186/s40779-023-00448-w · Cited by 357
“Many studies have shown that nanocomposite reinforced BNBMs not only have an excellent toughening and reinforcing effect on polymeric bulk materials, but also bring additional benefits such as the inhibitory effect of nanomaterials on the generation of crazes and fatigue crack propagation [151].”
BackgroundMethodNovel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites
Chen, L.-Y., Konishi, H., Fehrenbacher, A., Ma, C., Xu, J.-Q., Choi, H., Xu, H.-F., Pfefferkorn, F. E., & Li, X.-C. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.03.013 · Cited by 336
AlMangour, B., Kim, Y.-K., Grzesiak, D., & Lee, K.-A. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.07.050 · Cited by 312
Xiong, D.-B., Cao, M., Guo, Q., Tan, Z., Fan, G., Li, Z., & Zhang, D. (2015) · ACS Nano · doi:10.1021/acsnano.5b01067 · Cited by 302
Aluminum with dispersed nanoparticles by laser additive manufacturing
Lin, T.-C., Cao, C., Sokoluk, M., Jiang, L., Wang, X., Schoenung, J. M., Lavernia, E. J., & Li, X. (2019) · Nature Communications · doi:10.1038/s41467-019-12047-2 · Cited by 291
Gu, D., Wang, H., Dai, D., Yuan, P., Meiners, W., & Poprawe, R. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.10.011 · Cited by 279
Gu, D., Hagedorn, Y.-C., Meiners, W., Wissenbach, K., & Poprawe, R. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.010 · Cited by 256
Metadata
- Authors
- Tjong, S. C.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2007-07-16
- Volume
- 9
- Issue
- 8
- Pages
- 639-652
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2089302698
- Cited by
- 619
- References
- 12
- FWCI
- 21.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.