The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Aluminum with dispersed nanoparticles by laser additive manufacturing
Open accessAbstract
While laser-printed metals do not tend to match the mechanical properties and thermal stability of conventionally-processed metals, incorporating and dispersing nanoparticles in them should enhance their performance. However, this remains difficult to do during laser additive manufacturing. Here, we show that aluminum reinforced by nanoparticles can be deposited layer-by-layer via laser melting of nanocomposite powders, which enhance the laser absorption by almost one order of magnitude compared to pure aluminum powders. The laser printed nanocomposite delivers a yield strength of up to 1000 MPa, plasticity over 10%, and Young’s modulus of approximately 200 GPa, offering one of the highest specific Young’s modulus and specific yield strengths among structural metals, as well as an improved specific strength and thermal stability up to 400 °C compared to other aluminum-based materials. The improved performance is attributed to a high density of well-dispersed nanoparticles, strong interfacial bonding between nanoparticles and Al matrix, and ultrafine grain sizes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Recent developments in advanced aircraft aluminium alloys
Dursun, T., & Soutis, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.12.002 · Cited by 2,807
Hull, D., & Bacon, D. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70217-6 · Cited by 1,501
The role of interparticle and external forces in nanoparticle assembly
Min, Y., Akbulut, M., Kristiansen, K., Golan, Y., & Israelachvili, J. (2008) · Nature Materials · doi:10.1038/nmat2206 · Cited by 1,182
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
On the strength of discontinuous silicon carbide reinforced aluminum composites
Nardone, V. C., & Prewo, K. M. (1986) · Scripta Metallurgica · doi:10.1016/0036-9748(86)90210-3 · Cited by 1,128
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
Li, X., Ji, G., Chen, Z., Addad, A., Wu, Y. X., Wang, H., Vleugels, J., Humbeeck, J. V., & Kruth, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.062 · Cited by 893
Self-citationSize-affected single-slip behavior of pure nickel microcrystals
Dimiduk, D. M., Uchic, M. D., & Parthasarathy, T. A. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.05.023 · Cited by 717
Lu, K. (2010) · Science · doi:10.1126/science.1185866 · Cited by 717
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Grain structure control during metal 3D printing by high-intensity ultrasound
Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H., & Qian, M. (2020) · Nature Communications · doi:10.1038/s41467-019-13874-z · Cited by 848
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Self-citationWire Arc Additive Manufacturing of Stainless Steels: A Review
Jin, W., Zhang, C., Jin, S., Tian, Y., Wellmann, D., & Liu, W. (2020) · Applied Sciences · doi:10.3390/app10051563 · Cited by 388
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110779 · Cited by 330
Metadata
- Authors
- Lin, T.-C., Cao, C., Sokoluk, M., Jiang, L., Wang, X., Schoenung, J. M., Lavernia, E. J., & Li, X.
- Venue
- Nature Communications
- Published
- 2019-09-11
- Volume
- 10
- Issue
- 1
- Pages
- 4124-4124
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2972851489
- Cited by
- 291
- References
- 18
- FWCI
- 13.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Aluminum with dispersed nanoparticles by laser additive manufacturing. https://app.cochat.ai/papers/10.1038/s41467-019-12047-2
- The paper
- Lin, T.-C., Cao, C., Sokoluk, M., Jiang, L., Wang, X., Schoenung, J. M., Lavernia, E. J., & Li, X. (2019). Aluminum with dispersed nanoparticles by laser additive manufacturing. Nature Communications. https://doi.org/10.1038/s41467-019-12047-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.