Synthesis of photopolymerizable hydrophilic macromers and evaluation of their applicability as reactive resin components for the fabrication of three-dimensionally structured hydrogel matrices by 2-photon-polymerization
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
Two‐photon polymerization (2‐PP) is a promising new photolithographic technique to fabricate three‐dimensional (3D), micro‐ and nano‐structured tissue engineering scaffolds from photopolymerizable monomers. Although various photo resins are known for the use in 2‐PP, there is currently a need for photo‐curable monomers processable by 2‐PP to generate biocompatible 3D‐structured hydrogel materials for soft or cartilage tissue regeneration. In the present work hydrophilic methacrylate monomers and macromers based on synthetic poly(glycerine) and poly(ethylene glycol) urethanes as well as on the biopolymers dextran and hyaluronan is prepared. The photopolymerization behavior of these substances are investigated and formed hydrogel networks are studied with regard to their mechanical properties, cytocompatibility, and hydrolytic degradation. Based on these examinations simple 3D model structures are fabricated from these photo‐curable monomers and macromers by 2‐PP. It is shown that both the synthetic monomers and the dextran methacrylate macromer are efficient 2‐PP starting materials whereas the hyaluronan methacrylate can be used for 2‐PP only in combination with suitable water‐soluble co‐monomers. No cytotoxic effects are found in preliminary chondrocyte cultivation experiments on 2‐PP‐fabricated scaffolds but initial cell adhesion on the hydrophilic scaffold surfaces is rather low and has to be further improved to apply these structures in tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Controlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Annabi, N., Nichol, J. W., Zhong, X., Ji, C., Koshy, S., Khademhosseini, A., & Dehghani, F. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0639 · Cited by 1,308
Williams, C. G., Malik, A. N., Kim, T. K., Manson, P. N., & Elisseeff, J. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.024 · Cited by 899
Bryant, S. J., Nuttelman, C. R., & Anseth, K. S. (2000) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856200743805 · Cited by 774
Research works printed but not linked: 7
- 10.1002/(SICI)1097-4636(199604)30:4<441::AID-JBM2>3.0.CO;2-P · doi:10.1002/(sici)1097-4636(199604)30:4<441::aid-jbm2>3.0.co;2-p
- 10.1089/ten.2004.10.1316 · doi:10.1089/ten.2004.10.1316 · Paper page
- Lasagni A. F., 2009, Adv. Biomater., 11, B20
- Gittard S. D., 2010, Adv. Biomater., 12, B77
- Narayan R. J., 2005, Adv. Mater. Processes, 163, 39
- 10.1002/(SICI)1097-0290(19980320)57:6<655::AID-BIT3>3.0.CO;2-K · DOI
- 10.1002/(SICI)1097-4636(1999)48:4<511::AID-JBM17>3.0.CO;2-V · doi:10.1002/(sici)1097-4636(1999)48:4<511::aid-jbm17>3.0.co;2-v
Cited by
Functional Materials for Two‐Photon Polymerization in Microfabrication
Carlotti, M., & Mattoli, V. (2019) · Small · doi:10.1002/smll.201902687 · Cited by 260
Guiding Lights: Tissue Bioprinting Using Photoactivated Materials
Lee, M., Rizzo, R., Surman, F., & Zenobi-Wong, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00077 · Cited by 239
Hydrogels for Two‐Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix
Torgersen, J., Qin, X., Li, Z., Ovsianikov, A., Liska, R., & Stampfl, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203880 · Cited by 238
Polymerization mechanisms initiated by spatio‐temporally confined light
Skliutas, E., Lebedevaite, M., Kabouraki, E. A., Baldacchini, T., Ostrauskaitė, J., Vamvakaki, M., Farsari, M., Juodkazis, S., & Malinauskas, M. (2021) · Nanophotonics · doi:10.1515/nanoph-2020-0551 · Cited by 128
Nanoscale 3D printing of hydrogels for cellular tissue engineering
You, S., Li, J., Zhu, W. Z., Yu, C., Mei, D., & Chen, S. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00301g · Cited by 125
Metadata
- Authors
- Berg, A., Wyrwa, R., Weisser, J., Weiss, T., Schade, R., Hildebrand, G., Liefeith, K., Schneider, B., Ellinger, R., & Schnabelrauch, M.
- Affiliations
- Innovent (DE)
- Institute for Bioprocessing and Analytical Measurement Techniques (DE)
- Max Planck Society (DE)
- Corresponding author
- Schnabelrauch, Matthias
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2011-01-21
- Volume
- 13
- Issue
- 9
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2025105452
- Cited by
- 33
- References
- 44
- Citations by year
- 2026: 1 · 2025: 1 · 2023: 2 · 2021: 7 · 2020: 2 · 2019: 4 · 2018: 2 · 2017: 2 · 2016: 2 · 2014: 4 · 2013: 2 · 2012: 3
- FWCI
- 1.46
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- Max Planck Digital Library (submittedVersion)
- MPG.PuRe (Max Planck Society) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Nonlinear Optical Materials Studies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- two-photon polymerization, hydrogel scaffolds, tissue engineering scaffolds, hydrolytic degradation, cytocompatibility, chondrocyte adhesion, cartilage regeneration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis of photopolymerizable hydrophilic macromers and evaluation of their applicability as reactive resin components for the fabrication of three-dimensionally structured hydrogel matrices by 2-photon-polymerization. https://app.cochat.ai/papers/10.1002/adem.201080092
- The paper
- Berg, A., Wyrwa, R., Weisser, J., Weiss, T., Schade, R., Hildebrand, G., Liefeith, K., Schneider, B., Ellinger, R., & Schnabelrauch, M. (2011). Synthesis of photopolymerizable hydrophilic macromers and evaluation of their applicability as reactive resin components for the fabrication of three-dimensionally structured hydrogel matrices by 2-photon-polymerization. Advanced Engineering Materials. https://doi.org/10.1002/adem.201080092
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.