Two-photon polymerization of biocompatible photopolymers for microstructured 3D biointerfaces
The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Abstract
Three‐dimensional microstructured scaffolds provide a means for cells to be cultured in vitro in a way that resembles natural conditions more closely than flat tissue culture polystyrene. In the presented work, two‐photon polymerization (2PP) is applied as a tool for the engineering of high‐resolution 3D scaffold structures with a well defined microarchitecture made of biocompatible photo resins. 2PP is a novel photolithographic technique using femtosecond laser pulses which enables free 3D microstructuring of liquid photo resins due to the relationship of the axial and lateral spatial confinement of the photoreaction to the focal volume of a focused laser beam. A set of photo resins were tested with regard to 2PP processability and three different classes of methacrylated photopolymerizable monomers (methacrylated oligolactones, urethane dimethacrylate, poly(ethylene glycol diacrylate)) were found to be efficient 2PP materials. 3D microstructures based on computer models were produced and tested for biocompatibility. The initial cell adhesion and the viability of bovine chondrocytes on the polymeric scaffolds were evaluated morphologically by confocal laser scanning microscopy (CLSM) after three‐day culture on 2PP derived microstructures. 2PP derived scaffolds were fabricated in different sizes and geometries, starting from the 100 µm‐range reaching out to the cm‐range showing the actual possibilities to produce large volume scaffolds even for implantation purposes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Two-photon laser scanning fluorescence microscopy
Denk, W., Strickler, J. H., & Webb, W. W. (1990) · Science · doi:10.1126/science.2321027 · Cited by 9,488
Treatment of Deep Cartilage Defects in the Knee with Autologous Chondrocyte Transplantation
Brittberg, M., Lindahl, A., Nilsson, A., Ohlsson, C., Isaksson, O., & Peterson, L. (1994) · New England Journal of Medicine · doi:10.1056/nejm199410063311401 · Cited by 5,516
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727
Über Elementarakte mit zwei Quantensprüngen
Göppert‐Mayer, M. (1931) · Annalen der Physik · doi:10.1002/andp.19314010303 · Cited by 2,691
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Microscale technologies for tissue engineering and biology
Khademhosseini, A., Langer, R., Borenstein, J., & Vacanti, J. P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0507681102 · Cited by 1,558
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Research works printed but not linked: 8
- Martini J., 2006, Proc. SPIE‐Int. Soc. Opt. Eng., 6089, 274
- Ovsianikov A., 2008, Laser Chem., 7
- 10.1002/1616-3028(20020916)12:9<611::aid-adfm611>3.0.co;2-3 · doi:10.1002/1616-3028(20020916)12:9<611::aid-adfm611>3.0.co;2-3
- Schade R., 2009, Int. J. Artif. Organs, 32, 394
- Obata K., 2010, Proc. SPIE‐Int. Soc. Opt. Eng., 7584, 75840L
- Winfield R. J., 2008, Proc. SPIE‐Int. Soc. Opt. Eng., 6880, 688002
- Malinauskas M., 2010, Proc. SPIE‐Int. Soc. Opt. Eng., 7715, 77151F
- Vogta S., 2005, Biomed. Mater. Eng., 15, 73
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Bone tissue engineering scaffolding: computer-aided scaffolding techniques
Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A., & Chen, Q. (2014) · Progress in Biomaterials · doi:10.1007/s40204-014-0026-7 · Cited by 325
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Two‐Photon Polymerization: Fundamentals, Materials, and Chemical Modification Strategies
O'Halloran, S., Pandit, A., Heise, A., & Kellett, A. (2023) · Advanced Science · doi:10.1002/advs.202204072 · Cited by 274
Microarchitected Stretching‐Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al‐Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., & Abu Al‐Rub, R. K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800029 · Cited by 249
Metadata
- Authors
- Weiß, T., Schade, R., Laube, T., Berg, A., Hildebrand, G., Wyrwa, R., Schnabelrauch, M., & Liefeith, K.
- Affiliations
- Institute for Bioprocessing and Analytical Measurement Techniques (DE)
- Innovent (DE)
- Corresponding author
- Liefeith, Klaus
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2011-06
- Volume
- 13
- Issue
- 9
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2077710580
- Cited by
- 80
- References
- 92
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 4 · 2023: 5 · 2022: 5 · 2021: 6 · 2020: 5 · 2019: 10 · 2018: 7 · 2017: 6 · 2016: 5 · 2015: 5 · 2014: 4 · 2013: 6 · 2012: 6
- FWCI
- 3.22
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Nonlinear Optical Materials Studies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Keywords
- two-photon polymerization, 3D scaffolds, urethane dimethacrylate, poly(ethylene glycol) diacrylate, biocompatibility, chondrocyte adhesion, cell viability, scaffold implantation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Two-photon polymerization of biocompatible photopolymers for microstructured 3D biointerfaces. https://app.cochat.ai/papers/10.1002/adem.201080090
- The paper
- Weiß, T., Schade, R., Laube, T., Berg, A., Hildebrand, G., Wyrwa, R., Schnabelrauch, M., & Liefeith, K. (2011). Two-photon polymerization of biocompatible photopolymers for microstructured 3D biointerfaces. Advanced Engineering Materials. https://doi.org/10.1002/adem.201080090
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.