The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Titanate Nanotubes and Nanorods Prepared from Rutile Powder
Open accessAbstract
Various sized hollow nanotubes and solid nanorods are synthesized from rutile powder (particle size ≈ 120–280 nm) using a relatively simple chemical approach in alkaline solution. The nanotubes and nanorods occur as hydrated phases: TiO 2·1.25H 2 O and TiO 2·1.0H 2 O, respectively. The rutile particles react in concentrated NaOH solution under hydrothermal conditions, yielding layered sodium titanate in the form of either polycrystalline nanotubes or single‐crystal nanorods. The form of the product depends on the temperature and time of hydrothermal reaction: Therefore, this is a report of the template‐free control of the degree of crystallinity, crystal structure, and morphology of these types of nanoscale sodium titanate products. By treating the nanotubes and nanorods with dilute HCl, the sodium ions within them could be exchanged for protons, and the morphology of the nanotubes and nanorods is retained, resulting in hydrogen titanate nanotubes and nanorods. The electrochemical performance of dehydrated hydrogen titanate nanotubes and nanorods is explored in terms of their potential performance as anode materials for lithium‐ion batteries. The discharge capacity is higher for thin anatase nanorods converted from hydrogen titanate nanotubes when compared to the calcined (at 500 °C and 700 °C) products of hydrogen titanate nanorods. The significance of these findings is the possibility of fabricating delicate, nanostructured materials directly from industrial raw materials, because the natural mineral of titanium dioxide and most of the raw industrial TiO 2 products exist in the rutile phase.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Efficient Photochemical Water Splitting by a Chemically Modified n-TiO 2
Khan, S. U. M., Al-Shahry, M., & Ingler, W. B. (2002) · Science · doi:10.1126/science.1075035 · Cited by 4,074
Formation of Titanium Oxide Nanotube
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., & Niihara, K. (1998) · Langmuir · doi:10.1021/la9713816 · Cited by 2,475
Titania Nanotubes Prepared by Chemical Processing
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., & Niihara, K. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199910)11:15<1307::aid-adma1307>3.0.co;2-h · Cited by 1,576
Oxidic Nanotubes and Nanorods—Anisotropic Modules for a Future Nanotechnology
Patzke, G. R., Krumeich, F., & Nesper, R. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20020715)41:14<2446::aid-anie2446>3.0.co;2-k · Cited by 1,082
Synthesis and Characterization of Ion‐Exchangeable Titanate Nanotubes
Sun, X., & Li, Y. (2003) · Chemistry – A European Journal · doi:10.1002/chem.200204394 · Cited by 939
Sasaki, T., Watanabe, M., Hashizume, H., Yamada, H., & Nakazawa, H. (1996) · Journal of the American Chemical Society · doi:10.1021/ja960073b · Cited by 869
Armstrong, A. R., Armstrong, G., Canales, J., & Bruce, P. G. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200353571 · Cited by 737
Gao, X. P., Bao, J. L., Pan, G. L., Zhu, H. Y., Huang, P. X., Wu, F., & Song, D. Y. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp037075k · Cited by 578
Self-citationTiO2(B) a new form of titanium dioxide and the potassium octatitanate K2Ti8O17
Marchand, R., Brohan, L., & Tournoux, M. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90076-8 · Cited by 575
Cited by
Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications
Chen, X., & Mao, S. S. (2007) · Chemical Reviews · doi:10.1021/cr0500535 · Cited by 10,688
Protonated Titanates and TiO2 Nanostructured Materials: Synthesis, Properties, and Applications
Bavykin, D. V., Friedrich, J. M., & Walsh, F. C. (2006) · Advanced Materials · doi:10.1002/adma.200502696 · Cited by 1,634
One-Dimensional Titanium Dioxide Nanomaterials: Nanotubes
Lee, K., Mazare, A., & Schmuki, P. (2014) · Chemical Reviews · doi:10.1021/cr500061m · Cited by 1,185
Green energy storage materials: Nanostructured TiO2 and Sn-based anodes for lithium-ion batteries
Deng, D., Kim, M. G., Lee, J. Y., & Cho, J. (2009) · Energy & Environmental Science · doi:10.1039/b823474d · Cited by 891
Devan, R. S., Patil, R. A., Lin, J., & Ma, Y. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201008 · Cited by 813
One dimensional nanostructured materials
Kuchibhatla, S. V. N. T., Karakoti, A. S., Bera, D., & Seal, S. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.08.001 · Cited by 631
Liu, N., Chen, X., Zhang, J., & Schwank, J. W. (2014) · Catalysis Today · doi:10.1016/j.cattod.2013.10.090 · Cited by 548
Applications of nano-catalyst in new era
Chaturvedi, S., Dave, P. N., & Shah, N. K. (2012) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2011.01.015 · Cited by 534
“…et al., 2000; Burda et al., 2005; Chen et al., 2005a,b; Chen and Mao, 2006, 2007; Cozzoli et al., 2006; Millis and Hunte, 1997; Grätzel, 2000, 2001; Lan et al., 2005; Holland et al., 1998, 1999; Mor et al., 2003; Hwang et al., 2003; Meilert et al., 2005; Pfaff and Reynders, 1999; Hagfeldt and…”
An Efficient Photocatalyst Structure: TiO2(B) Nanofibers with a Shell of Anatase Nanocrystals
Yang, D., Liu, H., Zheng, Z., Yuan, Y., Zhao, J.-C., Waclawik, E. R., Ke, X., & Zhu, H. (2009) · Journal of the American Chemical Society · doi:10.1021/ja906774k · Cited by 506
Self-citationTang, Y., Zhang, Y., Deng, J., Wei, J., Tam, H. L., Chandran, B. K., Dong, Z., Chen, Z., & Chen, X. (2014) · Advanced Materials · doi:10.1002/adma.201402000 · Cited by 422
Yu, J., Yu, H., Cheng, B., & Trapalis, C. (2006) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2006.01.003 · Cited by 383
Jo, W.-K., & Natarajan, T. S. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.120 · Cited by 360
A comprehensive review on synthesis methods for transition-metal oxide nanostructures
Guo, T., Yao, M.-S., Lin, Y.-H., & Nan, C.-W. (2015) · CrystEngComm · doi:10.1039/c5ce00034c · Cited by 328
Titanate and titania nanostructured materials for environmental and energy applications: a review
Zhang, Y., Jiang, Z., Huang, J., Lim, L. Y., Li, W., Deng, J., Gong, D., Tang, Y., Lai, Y., & Chen, Z. (2015) · RSC Advances · doi:10.1039/c5ra11298b · Cited by 318
Three-dimensional electrodes and battery architectures
Arthur, T. S., Bates, D. J., Cirigliano, N., Johnson, D. C., Malati, P., Mosby, J. M., Perre, E., Rawls, M. T., Prieto, A. L., & Dunn, B. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.156 · Cited by 299
Sequence of Events for the Formation of Titanate Nanotubes, Nanofibers, Nanowires, and Nanobelts
Wu, D., Liu, J., Zhao, X., Li, A., Chen, Y., & Ming, N. (2006) · Chemistry of Materials · doi:10.1021/cm0519075 · Cited by 272
Gupta, T., Samriti, Cho, J., & Prakash, J. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100428 · Cited by 268
Dhandole, L. K., Kim, S.-G., Bae, H.-S., Ryu, H. I., Chung, H.-S., Seo, Y.-S., Cho, M., Shea, P. J., & Jang, J. S. (2020) · Environmental Research · doi:10.1016/j.envres.2019.108651 · Cited by 45
Metadata
- Authors
- Lan, Y., Gao, X. P., Zhu, H. Y., Zheng, Z. F., Yan, T. Y., Wu, F., Ringer, S. P., & Song, D. Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2005-07-25
- Volume
- 15
- Issue
- 8
- Pages
- 1310-1318
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2008671877
- Cited by
- 312
- References
- 31
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.