The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Influence of Solvent Mixing on the Morphology and Performance of Solar Cells Based on Polyfluorene Copolymer/Fullerene Blends
Abstract
The influence of the solvent on the morphology and performance of polymer solar cells is investigated in devices based on blends of the polyfluorene copolymer, poly(2,7‐(9,9‐dioctyl‐fluorene)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)), and [6,6]‐phenyl‐C 61‐butyric acid methyl ester. The blends are spin‐coated from chloroform or from chloroform mixed with small amounts of xylene, toluene, or chlorobenzene. The devices are characterized under monochromatic light and solar illumination AM1.5 (AM: air mass). An enhancement of the photocurrent density is observed in diodes made from chloroform mixed with chlorobenzene, and reduced photocurrent density is observed in diodes made from chloroform mixed with xylene or toluene, compared to diodes made from neat chloroform. The open‐circuit voltages are almost the same in all diodes. The surfaces of the active layers are imaged using atomic force microscopy. Height images indicate that a finer and more uniform distribution of domains corresponds to the diodes with enhanced photocurrent that are made from chloroform mixed with chlorobenzene, while a structure with larger domains is associated with the lower photocurrents in the diodes made from chloroform mixed with xylene or toluene. The influence of the morphology on the excited‐state dynamics and charge generation is investigated using time‐resolved spectroscopy. Fast formation of bound charge pairs followed by their conversion into free charge carriers is resolved, and excitation‐intensity‐dependent non‐geminate recombination of free charges is observed. A significant enhancement in free‐charge‐carrier generation is observed on introducing chlorobenzene into chloroform. Imaging photocurrent generation from the solar cells with a light‐pulse technique shows an inhomogeneous photocurrent distribution, which is related to the undulations in the thickness of the active layer. Thicker parts of the diodes yield higher photocurrent values.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Origin of the Open Circuit Voltage of Plastic Solar Cells
Brabec, C. J., Cravino, A., Meissner, D., Sariciftci, N. S., Fromherz, T., Rispens, M. T., Sanchez, L., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<374::aid-adfm374>3.0.co;2-w · Cited by 1,808
Laminated fabrication of polymeric photovoltaic diodes
Granström, M., Petritsch, K., Arias, A. C., Lux, A., Andersson, M. R., & Friend, R. H. (1998) · Nature · doi:10.1038/26183 · Cited by 1,287
Self-citationOrganic photovoltaics: technology and market
Brabec, C. J. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.030 · Cited by 1,152
Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells
Mihailetchi, V. D., Blom, P. W. M., Hummelen, J. C., & Rispens, M. T. (2003) · Journal of Applied Physics · doi:10.1063/1.1620683 · Cited by 812
Gregg, B. A. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp022507x · Cited by 790
Svensson, M., Zhang, F., Veenstra, S. C., Verhees, W. J. H., Hummelen, J. C., Kroon, J. M., Inganäs, O., & Andersson, M. R. (2003) · Advanced Materials · doi:10.1002/adma.200304150 · Cited by 736
Self-citationNanoscale Morphology of Conjugated Polymer/Fullerene‐Based Bulk‐ Heterojunction Solar Cells
Hoppe, H., Niggemann, M., Winder, C., Kraut, J., Hiesgen, R., Hinsch, A., Meissner, D., & Sariciftci, N. S. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305026 · Cited by 735
Characteristics of resist films produced by spinning
Meyerhofer, D. (1978) · Journal of Applied Physics · doi:10.1063/1.325357 · Cited by 703
Kim, Y., Choulis, S. A., Nelson, J., Bradley, D. D. C., Cook, S., & Durrant, J. R. (2005) · Applied Physics Letters · doi:10.1063/1.1861123 · Cited by 672
van Duren, J. K. J., Yang, X., Loos, J., Bulle‐Lieuwma, C. W. T., Sieval, A. B., Hummelen, J. C., & Janssen, R. A. J. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305049 · Cited by 651
Brabec, C. J., Zerza, G., Cerullo, G., De Silvestri, S., Luzzati, S., Hummelen, J. C., & Sariciftci, S. (2001) · Chemical Physics Letters · doi:10.1016/s0009-2614(01)00431-6 · Cited by 610
Rispens, M. T., Meetsma, A., Rittberger, R., Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2003) · Chem. Commun. · doi:10.1039/b305988j · Cited by 350
Accurate efficiency determination and stability studies of conjugated polymer/fullerene solar cells
Kroon, J. M., Wienk, M. M., Verhees, W. J. H., & Hummelen, J. C. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(01)01589-9 · Cited by 215
Influence of the Anodic Work Function on the Performance of Organic Solar Cells
Frohne, H., Shaheen, S. E., Brabec, C. J., Müller, D. C., Sariciftci, N. S., & Meerholz, K. (2002) · ChemPhysChem · doi:10.1002/1439-7641(20020916)3:9<795::aid-cphc795>3.0.co;2-a · Cited by 187
Low bandgap alternating polyfluorene copolymers in plastic photodiodes and solar cells
Inganäs, O., Svensson, M., Zhang, F., Gadisa, A., Persson, N. K., Wang, X., & Andersson, M. R. (2004) · Applied Physics A · doi:10.1007/s00339-003-2498-5 · Cited by 182
Self-citationCamaioni, N., Ridolfi, G., Casalbore-Miceli, G., Possamai, G., & Maggini, M. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021203)14:23<1735::aid-adma1735>3.0.co;2-o · Cited by 175
The influence of materials work function on the open circuit voltage of plastic solar cells
Brabec, C. J., Cravino, A., Meissner, D., Sariciftci, N. S., Rispens, M. T., Sanchez, L., Hummelen, J. C., & Fromherz, T. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(01)01586-3 · Cited by 175
Persson, N.-K., Schubert, M. M., & Inganäs, O. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(04)00094-7 · Cited by 51
Self-citation
Cited by
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Metadata
- Authors
- Zhang, F., Jespersen, K. G., Björström, C., Svensson, M., Andersson, M. R., Sundström, V., Magnusson, K., Moons, E., Yartsev, A., & Inganäs, O.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-02-09
- Volume
- 16
- Issue
- 5
- Pages
- 667-674
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2156668998
- Cited by
- 441
- References
- 21
- FWCI
- 30.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.