The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Carbide‐Derived Carbons: Effect of Pore Size on Hydrogen Uptake and Heat of Adsorption
Abstract
Cryoadsorption is a promising method of enhancing gravimetric and volumetric onboard H 2 storage capacity for future transportation needs. Inexpensive carbide‐derived carbons (CDCs), produced by chlorination of metal carbides, have up to 80 % open‐pore volume with tunable pore size and specific surface area (SSA). Tuning the carbon structure and pore size with high sensitivity by using different starting carbides and chlorination temperatures allows rational design of carbon materials with enhanced C–H 2 interaction and thus increased H 2 storage capacity. A systematic experimental investigation of a large number of CDCs with controlled pore size distributions and SSAs shows how smaller pores increase both the heat of adsorption and the total volume of adsorbed H 2. It has been demonstrated that increasing the average heat of H 2 adsorption above 6.6 kJ mol–1 substantially enhances H 2 uptake at 1 atm (1 atm = 101 325 Pa) and –196 °C. The heats of adsorption up to 11 kJ mol–1 exceed values reported for metal–organic framework compounds and carbon nanotubes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
Principles of Adsorption and Adsorption Processes
Ruthven, D. M. (1984) · Medical Entomology and Zoology · Cited by 3,662
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Strategies for Hydrogen Storage in Metal–Organic Frameworks
Rowsell, J. L. C., & Yaghi, O. M. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462786 · Cited by 2,463
Adsorbents: fundamentals and applications
(2004) · Focus on Catalysts · doi:10.1016/s1351-4180(04)00383-6 · Cited by 1,256
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Optimum Conditions for Adsorptive Storage
Bhatia, S. K., & Myers, A. L. (2006) · Langmuir · doi:10.1021/la0523816 · Cited by 1,113
Powder Surface Area and Porosity
Lowell, S., & Shields, J. E. (1991) · Springer eBooks · doi:10.1007/978-94-015-7955-1 · Cited by 1,100
Cited by
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Carbons and Electrolytes for Advanced Supercapacitors
Béguin, F., Presser, V., Balducci, A., & Frackowiak, E. (2014) · Advanced Materials · doi:10.1002/adma.201304137 · Cited by 2,686
Yan, J., Wang, Q., Wei, T., & Fan, Z. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300816 · Cited by 2,232
Energy storage applications of activated carbons: supercapacitors and hydrogen storage
Sevilla, M., & Mokaya, R. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43525c · Cited by 1,614
Jiang, H.-L., Liu, B., Lan, Y.-Q., Kuratani, K., Akita, T., Shioyama, H., Zong, F., & Xu, Q. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203184k · Cited by 1,197
Hierarchically Structured Porous Materials for Energy Conversion and Storage
Li, Y., Fu, Z., & Su, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200591 · Cited by 951
Quenched solid density functional theory and pore size analysis of micro-mesoporous carbons
Neimark, A. V., Lin, Y., Ravikovitch, P. I., & Thommes, M. (2009) · Carbon · doi:10.1016/j.carbon.2009.01.050 · Cited by 868
MOF-Derived Hierarchically Porous Carbon with Exceptional Porosity and Hydrogen Storage Capacity
Yang, S. J., Kim, T., Im, J. H., Kim, Y. S., Lee, K., Jung, H., & Park, C. R. (2012) · Chemistry of Materials · doi:10.1021/cm202554j · Cited by 749
Hydrogen Storage in Microporous Hypercrosslinked Organic Polymer Networks
Wood, C. D., Tan, B., Trewin, A., Niu, H., Bradshaw, D., Rosseinsky, M. J., Khimyak, Y. Z., Campbell, N. L., Kirk, R., Stöckel, E., et al. (2007) · Chemistry of Materials · doi:10.1021/cm070356a · Cited by 704
Carbide‐Derived Carbons – From Porous Networks to Nanotubes and Graphene
Presser, V., Heon, M., & Gogotsi, Y. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002094 · Cited by 678
Self-citationEffect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Self-citationWei, L., Sevilla, M., Fuertes, A. B., Mokaya, R., & Yushin, G. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100019 · Cited by 629
Self-citationEnhanced Hydrogen Storage Capacity of High Surface Area Zeolite-like Carbon Materials
Yang, Z., Xia, Y., & Mokaya, R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja067149g · Cited by 622
High Hydrogen Storage Capacity of Porous Carbons Prepared by Using Activated Carbon
Wang, H., Gao, Q., & Hu, J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8083225 · Cited by 593
Gu, W., & Yushin, G. (2014) · WIREs Energy and Environment · doi:10.1002/wene.102 · Cited by 569
Self-citationNanostructured activated carbons from natural precursors for electrical double layer capacitors
Wei, L., & Yushin, G. (2012) · Nano Energy · doi:10.1016/j.nanoen.2012.05.002 · Cited by 532
Self-citationHydrogen storage: beyond conventional methods
Dalebrook, A. F., Gan, W., Grasemann, M., Moret, S., & Laurenczy, G. (2013) · Chemical Communications · doi:10.1039/c3cc43836h · Cited by 503
Porous carbon-based materials for hydrogen storage: advancement and challenges
Xia, Y., Yang, Z., & Zhu, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10583k · Cited by 496
High-Rate Electrochemical Capacitors Based on Ordered Mesoporous Silicon Carbide-Derived Carbon
Korenblit, Y., Rose, M., Kockrick, E., Borchardt, L., Kvit, A., Kaskel, S., & Yushin, G. (2010) · ACS Nano · doi:10.1021/nn901825y · Cited by 479
Self-citationNanoporous Polymers for Hydrogen Storage
Germain, J., Fréchet, J. M. J., & Svec, F. (2009) · Small · doi:10.1002/smll.200801762 · Cited by 432
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Tian, W., Gao, Q., Tan, Y., Yang, K., Zhu, L., Yang, C., & Zhang, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06620k · Cited by 423
Wei, L., Sevilla, M., Fuertes, A. B., Mokaya, R., & Yushin, G. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101866 · Cited by 419
Self-citationPorous Metal-Organic Frameworks: Promising Materials for Methane Storage
Li, B., Wen, H.-M., Zhou, W., Xu, J. Q., & Chen, B. (2016) · Chem · doi:10.1016/j.chempr.2016.09.009 · Cited by 408
Boron Nitride Porous Microbelts for Hydrogen Storage
Weng, Q., Wang, X., Zhi, C., Bando, Y., & Golberg, D. (2013) · ACS Nano · doi:10.1021/nn305320v · Cited by 332
Lee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
Self-citationLuo, J., Xu, H., Liu, Y., Zhao, Y., Daemen, L. L., Brown, C., Timofeeva, T. V., Ma, S., & Zhou, H.-C. (2008) · Journal of the American Chemical Society · doi:10.1021/ja801411f · Cited by 313
Oxygen-rich microporous carbons with exceptional hydrogen storage capacity
Blankenship, L. S., Balahmar, N., & Mokaya, R. (2017) · Nature Communications · doi:10.1038/s41467-017-01633-x · Cited by 311
Thomas, K. M. (2009) · Dalton Transactions · doi:10.1039/b815583f · Cited by 305
Rose, M., Korenblit, Y., Kockrick, E., Borchardt, L., Oschatz, M., Kaskel, S., & Yushin, G. (2011) · Small · doi:10.1002/smll.201001898 · Cited by 301
Self-citationLithium‐Doped Conjugated Microporous Polymers for Reversible Hydrogen Storage
Li, A., Lu, R., Wang, Y., Wang, X., Han, K., & Deng, W. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906936 · Cited by 291
Activated carbon with optimum pore size distribution for hydrogen storage
Sethia, G., & Sayari, A. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.032 · Cited by 288
Carbon allotropes: beyond graphite and diamond
Falcao, E. H., & Wudl, F. (2007) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1693 · Cited by 286
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Yang, J., Wu, H., Zhu, M., Ren, W., Lin, Y., Chen, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.007 · Cited by 269
Importance of pore size in high-pressure hydrogen storage by porous carbons
Gogotsi, Y., Portet, C., Osswald, S., Simmons, J. M., Yildirim, T., Laudisio, G., & Fischer, J. E. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.073 · Cited by 265
Self-citation(2023) · doi:10.1016/j.ijhydene.2022.10.081 · Cited by 10
Metadata
- Authors
- Yushin, G., Dash, R., Jagiello, J., Fischer, J. E., & Gogotsi, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-10-27
- Volume
- 16
- Issue
- 17
- Pages
- 2288-2293
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2055889238
- Cited by
- 402
- References
- 31
- FWCI
- 12.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.